Comprehensive Aging Analysis of Volumetric Constrained Lithium-Ion Pouch Cells with High Concentration Silicon-Alloy Anodes
Tóm tắt
In this research, twenty-four high capacity (1360 mAh) NMC622/Si-alloy Li-ion full pouch cells with high silicon-alloy content (55%) are cycle aged under seven different cycling conditions to study the effect of different stressors on the cycle life of Si-anode full cells, among which are the effect of ambient temperature, Depth of Discharge (DoD) and the discharge current. The cells are volumetrically constrained at an optimal initial pressure to improve their cycle life, energy and power capabilities. Furthermore, the innovative test setup allows measuring the developed pressure as a result of repeated (de-)lithiation during battery cycling. This uniquely vast testing campaign on Si-anode full cells allows us to study and quantify independently the influence of different stress factors on their cycle life for the first time, as well as to develop a new capacity fade model based on an observed linear relationship between capacity retention and total discharge capacity throughput.
Từ khóa
Tài liệu tham khảo
NOAA National Centers for Environmental Information (2018). State of the Climate: Global Climate Report for Annual 2017.
Feng, K., Li, M., Liu, W., Kashkooli, A.G., Xiao, X., and Cai, M. (2018). Silicon-Based Anodes for Lithium-Ion Batteries: From Fundamentals to Practical Applications. Small, 14.
Louli, 2017, Volume, Pressure and Thickness Evolution of Li-Ion Pouch Cells with Silicon-Composite Negative Electrodes, J. Electrochem. Soc., 164, 2689, 10.1149/2.1691712jes
Shen, 2017, Research progress on silicon/carbon composite anode materials for lithium-ion battery, J. Energy Chem., 27, 1067, 10.1016/j.jechem.2017.12.012
Edstr, 2016, In fluence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries, J. Power Sour., 325, 513, 10.1016/j.jpowsour.2016.06.059
Radvanyi, 2014, Study and modeling of the Solid Electrolyte Interphase behavior on nano-silicon anodes by Electrochemical Impedance Spectroscopy, Electrochim. Acta, 137, 751, 10.1016/j.electacta.2014.06.069
Steinhauer, 2017, Solid Electrolyte Interphase Formation on Silicon and Lithium Titanate Anodes in Lithium-Ion Batteries, J. Appl. Electrochem., 47, 249, 10.1007/s10800-016-1032-3
Wetjen, 2017, Differentiating the Degradation Phenomena in Silicon-Graphite Electrodes for Lithium-Ion Batteries, J. Electrochem. Soc., 164, 2840, 10.1149/2.1921712jes
Ozanam, 2016, Silicon as anode material for Li-ion batteries, Mater. Sci. Eng. B, 213, 2, 10.1016/j.mseb.2016.04.016
Du, 2017, Si alloy/graphite coating design as anode for Li-ion batteries with high volumetric energy density, Electrochim. Acta, 254, 123, 10.1016/j.electacta.2017.09.087
Demirkan, 2015, Cycling performance of density modulated multilayer silicon thin film anodes in Li-ion batteries, J. Power Sour., 273, 52, 10.1016/j.jpowsour.2014.09.027
Ko, 2015, Challenges in Accommodating Volume Change of Si Anodes for Li-Ion Batteries, ChemElectroChem, 2, 1645, 10.1002/celc.201500254
Gustafsson, 2015, Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive, Chem. Mater., 27, 2591, 10.1021/acs.chemmater.5b00339
Zuo, 2017, Nano Energy Silicon based lithium-ion battery anodes: A chronicle perspective review, Nano Energy, 31, 113, 10.1016/j.nanoen.2016.11.013
Haruta, 2017, Temperature effects on SEI formation and cyclability of Si nano flake powder anode in the presence of SEI-forming additives, Electrochim. Acta, 224, 186, 10.1016/j.electacta.2016.12.071
Jung, R., Metzger, M., Haering, D., Solchenbach, S., Marino, C., Tsiouvaras, N., Stinner, C., and Gasteiger, H.A. (2016). Consumption of Fluoroethylene Carbonate (FEC) on Si-C Composite Electrodes for Li-Ion Batteries. J. Electrochem. Soc., 166.
Leung, 2014, Modeling Electrochemical Decomposition of Fluoroethylene Carbonate on Silicon Anode Surfaces in Lithium Ion Batteries, J. Electrochem. Soc., 161, 213, 10.1149/2.092401jes
Dupre, 2016, Multiprobe Study of the Solid Electrolyte Interphase on Silicon-Based Electrodes in Full-Cell Configuration, Chem. Mater., 28, 2557, 10.1021/acs.chemmater.5b04461
Delpuech, 2016, Mechanism of Silicon Electrode Aging upon Cycling in Full Lithium-Ion Batteries, ChemElectroChem, 9, 841
Chevrier, 2018, Design and Testing of Prelithiated Full Cells with High Silicon Content, J. Electrochem. Soc., 165, 1129, 10.1149/2.1161805jes
Berckmans, G., De Sutter, L., Kersys, A., Kriston, A., Marinaro, M., Kasper, M., Axmann, P., Smekens, J., Wohlfahrt-Mehrens, M., and Pfrang, A. (2018). Electrical Characterization and Micro X-ray Computed Tomography Analysis of Next-Generation Silicon Alloy Cells. World Electr. Veh. J., 9.
Kierzek, 2016, Factors influencing cycle-life of full Li-ion cell built from Si/C composite as anode and conventional cathodic material, Electrochim. Acta, 192, 475, 10.1016/j.electacta.2016.02.019
Lu, 2018, Calendar and Cycle Life of Lithium-Ion Batteries Containing Silicon Monoxide Anode, J. Electrochem. Soc., 165, 2179, 10.1149/2.0631810jes
Kalaga, 2018, Calendar-life versus cycle-life aging of lithium-ion cells with silicon-graphite composite electrodes, Electrochim. Acta, 280, 221, 10.1016/j.electacta.2018.05.101
Klett, 2016, Electrode Behavior RE-Visited: Monitoring Potential Windows, Capacity Loss, and Impedance Changes in Li1.03 (Ni0.5Co0.2Mn0.3) 0.97 O2/Silicon-Graphite Full Cells, J. Electrochem. Soc., 163, 875, 10.1149/2.0271606jes
Marinaro, 2017, High performance 1.2 Ah Si-alloy/GraphitejLiNi0.5Mn0.3Co0.2O2 prototype Li-ion battery, J. Power Sour., 357, 188, 10.1016/j.jpowsour.2017.05.010
Gabrielli, 2017, A new approach for compensating the irreversible capacity loss of high- A new approach for compensating the irreversible capacity loss of high-energy Si/C j LiNi0.5Mn1.5O4 lithium-ion batteries, J. Power Sour., 351, 35, 10.1016/j.jpowsour.2017.03.051
(2018, July 15). Electrically Propelled Road Vehicles—Test Specification for Lithium-Ion Traction Battery Packs and Systems—Part 1: High-Power Applications. ISO 12405-2. Available online: https://www.iso.org/standard/55854.html.
(2018, July 15). Electrically Propelled Road Vehicles—Test Specification for Lithium-Ion Traction Battery Packs and Systems—Part 2: High Energy Application. ISO 12405-1. Available online: https://www.iso.org/standard/51414.html.
(2018, July 15). Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles—Part 1: Performance Testing. IEC 62660-1. Available online: https://webstore.iec.ch/publication/7331.
(2018, July 15). Secondary Batteries for the Propulsion of Electric Road Vehicles—Part 2: Dynamic Discharge Performance Test and Dynamic Endurance Test. IEC 61982-2. Available online: https://webstore.iec.ch/publication/20204.
Hoog, 2017, Combined cycling and calendar capacity fade modeling of a Nickel-Manganese-Cobalt Oxide Cell with real-life profile validation, Appl. Energy, 200, 47, 10.1016/j.apenergy.2017.05.018
Waldmann, 2014, Temperature dependent ageing mechanisms in Lithium-ion batteries e A Post-Mortem study, J. Power Sour., 262, 129, 10.1016/j.jpowsour.2014.03.112
Jalkanen, 2015, Cycle aging of commercial NMC/graphite pouch cells at different temperatures, Appl. Energy, 154, 160, 10.1016/j.apenergy.2015.04.110
Wang, 2011, Cycle-life model for graphite-LiFePO4 cells, J. Power Sour., 196, 3942, 10.1016/j.jpowsour.2010.11.134
Omar, 2014, Lithium iron phosphate based battery—Assessment of the aging parameters and development of cycle life model, Appl. Energy, 113, 1575, 10.1016/j.apenergy.2013.09.003
Klett, 2017, Layered Oxide, Graphite and Silicon-Graphite Electrodes for Lithium-Ion Cells: Effect of Electrolyte Composition and Cycling Windows, J. Electrochem. Soc., 164, 6095, 10.1149/2.0131701jes
Deshpande, 2012, Battery Cycle Life Prediction with Coupled Chemical Degradation and Fatigue Mechanics, J. Electrochem. Soc., 159, 1730, 10.1149/2.049210jes
Sun, 2017, Changes of Degradation Mechanisms of LiFePO4/Graphite Batteries Cycled at Different Ambient Temperatures, Electrochim. Acta, 237, 248, 10.1016/j.electacta.2017.03.158
Leng, F., Tan, C.M., and Pecht, M. (2015). Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature. Sci. Rep., 1–12.
Jin, 2017, Challenges and Recent Progress in the Development of Si Anodes for Lithium-Ion Battery, Adv. Energy Mater., 7, 1, 10.1002/aenm.201700715
Sethuraman, 2012, Real-time stress measurements in lithium-ion battery negative-electrodes, J. Power Sour., 206, 334, 10.1016/j.jpowsour.2012.01.036
Bucci, G., Swamy, T., Bishop, S., Sheldon, B.W., Chiang, Y.m., and Carter, W.C. (2017). The Effect of Stress on Battery-Electrode Capacity. J. Electrochem. Soc., 166.
Cheng, X., and Pecht, M. (2017). In Situ Stress Measurement Techniques on Li-ion Battery Electrodes: A Review. Energies, 10.
Glazier, 2017, An Analysis of Artificial and Natural Graphite in Lithium Ion Pouch Cells Using Ultra-High Precision Coulometry, Isothermal Microcalorimetry, Gas Evolution, Long Term Cycling and Pressure Measurements, J. Electrochem. Soc., 164, 3545, 10.1149/2.0421714jes
Cannarella, 2014, State of health and charge measurements in lithium-ion batteries using mechanical stress, J. Power Sour., 269, 7, 10.1016/j.jpowsour.2014.07.003
Dai, 2017, State of charge estimation for lithium-ion pouch batteries based on stress measurement, Energy, 129, 16, 10.1016/j.energy.2017.04.099
Cui, Y., Du, C., Yin, G., Gao, Y., Zhang, L., and Guan, T. (2015). Multi-Stress Factor Model for Cycle Lifetime Prediction of Lithium Ion Batteries with Shallow-Depth Discharge. J. Power Sour.