Comparative analytical study of the coupled criterion and the principle of minimum total energy with stress condition applied to linear elastic interfaces

Theoretical and Applied Fracture Mechanics - Tập 119 - Trang 103274 - 2022
M. Muñoz-Reja1, V. Mantič1, L. Távara1
1Grupo de Elasticidad y Resistencia de Materiales, Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Camino de los Descubrimientos s/n, 41092 Sevilla, Spain

Tài liệu tham khảo

Hashin, 1996, Finite thermoelastic fracture criterion with application to laminate cracking analysis, J. Mech. Phys. Solids, 44, 1129, 10.1016/0022-5096(95)00080-1

Leguillon, 2002, Strength or toughness? A criterion for crack onset at a notch, Eur. J. Mech. A Solids, 21, 61, 10.1016/S0997-7538(01)01184-6

Taylor, 2005, The fracture mechanics of finite crack extension, Eng. Fract. Mech., 72, 1021, 10.1016/j.engfracmech.2004.07.001

Cornetti, 2006, Finite fracture mechanics: a coupled stress and energy failure criterion, Eng. Fract. Mech., 73, 2021, 10.1016/j.engfracmech.2006.03.010

Camanho, 2012, A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates, Compos. A, 43, 1219, 10.1016/j.compositesa.2012.03.004

Sapora, 2015, An improved finite fracture mechanics approach to blunt V-notch brittle fracture mechanics: Experimental verification on ceramic, metallic, and plastic materials, Theor. Appl. Fract. Mech., 78, 20, 10.1016/j.tafmec.2015.04.004

García, 2018, The effect of residual thermal stresses on transverse cracking in cross-ply laminates: an application of the coupled criterion of the finite fracture mechanics, Int. J. Fract., 211, 61, 10.1007/s10704-018-0276-9

Rosendahl, 2019, Nonlinear elastic finite fracture mechanics: Modeling mixed-mode crack nucleation in structural glazing silicone sealants, Mater. Des., 182, 10.1016/j.matdes.2019.108057

Doitrand, 2020, Nonlinear implementation of finite fracture mechanics: A case study on notched Brazilian disk samples, Int. J. Non-Linear Mech., 119, 10.1016/j.ijnonlinmec.2019.103245

Doitrand, 2021, Experimental and theoretical characterization of mixed mode brittle failure from square holes, Int. J. Fract., 228, 33, 10.1007/s10704-020-00512-9

Prandtl, 1933, A thought model for the fracture of brittle solids, Z. Phys. Angew. Math. Mech., 13, 129, 10.1002/zamm.19330130218

Entov, 1968, On the Prandtl brittle fracture model, Mech. Solids, 3, 79

Lenci, 2001, Analysis of a crack at a weak interface, Int. J. Fract., 108, 275, 10.1023/A:1011041409243

Carpinteri, 2009, Edge debonding in FRP strengthened beams: Stress versus energy failure criteria., Eng. Struct., 31, 2436, 10.1016/j.engstruct.2009.05.015

Távara, 2010, Analysis of a crack in a thin adhesive layer between orthotropic materials. An application to composite interlaminar fracture toughness test, CMES-Comput. Model. Eng. Sci., 58, 247

Távara, 2011, BEM analysis of crack onset and propagation along fiber-matrix interface under transverse tension using a linear elastic-brittle interface model, Eng. Anal. Bound. Elem., 35, 207, 10.1016/j.enganabound.2010.08.006

Mantič, 2015, A linear elastic - brittle interface model: Application for the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads, Int. J. Fract., 195, 15, 10.1007/s10704-015-0043-0

Cornetti, 2012, Finite fracture mechanics at elastic interfaces, Int. J. Solids Struct., 49, 1022, 10.1016/j.ijsolstr.2012.01.002

Muñoz Reja, 2016, Crack onset and propagation at fibre-matrix elastic interfaces under biaxial loading using finite fracture mechanics, Compos. A, 82, 267, 10.1016/j.compositesa.2015.09.023

Muñoz Reja, 2018, Convergence of the BEM solution applied to the CCFFM for LEBIM, Key Eng. Mater., 774, 355, 10.4028/www.scientific.net/KEM.774.355

Muñoz Reja, 2020, Interface crack model using finite fracture mechanics applied to the double pull-push shear test, Int. J. Solids Struct., 188–189, 56, 10.1016/j.ijsolstr.2019.09.008

Muñoz Reja, 2020, A numerical implementation of the coupled criterion of finite fracture mechanics for elastic interfaces, Theor. Appl. Fract. Mech., 108, 10.1016/j.tafmec.2020.102607

Mantič, 2014, Prediction of initiation and growth of cracks in composites. Coupled stress and energy criterion of the finite fracture mechanics (Keynote lecture)

Dimitri, 2017, Mode-I debonding of a double cantilever beam: A comparison between cohesive crack modeling and finite fracture mechanics, Int. J. Solids Struct., 124, 57, 10.1016/j.ijsolstr.2017.06.007

Rosendahl, 2019, Modeling snow slab avalanches caused by weak layer failure – Part I: Slabs on compliant and collapsible weak layers, Cryosphere Discuss., 1

Mantič, 2009, Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion, Int. J. Solids Struct., 46, 1287, 10.1016/j.ijsolstr.2008.10.036

García, 2014, Fiber-size effects on the onset of fiber-matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models, Eng. Fract. Mech., 115, 96, 10.1016/j.engfracmech.2013.10.014

Garg, 1988, Delamination - A damage mode in composite structures, Eng. Fract. Mech., 29, 557, 10.1016/0013-7944(88)90181-6

Tay, 2003, Characterization and analysis of delamination fracture in composites: An overview of developments from 1990 to 2001, Appl. Mech. Rev., 56, 1, 10.1115/1.1504848

Volkersen, 1938, Die Nietkraftverteilung in Zugbeanspruchten Nietverbindungen mit Konstanten Laschen-querschnitten, Luftfahrtforschung, 15, 4

Goland, 1944, The stresses in cemented joints, J. Appl. Mech., 11, A17, 10.1115/1.4009336

Kanninen, 1973, An augmented double cantilever beam model for studying crack propagation and arrest, Int. J. Fract., 9, 83, 10.1007/BF00035958

Škec, 2019, Complete analytical solutions for double cantilever beam specimens with bi-linear quasi-brittle and brittle interfaces, Int. J. Fract., 215, 1, 10.1007/s10704-018-0324-5

Wolfram, 2003

Thông tin
Thông tin xuất bản

Theoretical and Applied Fracture Mechanics

Tập 119

103274

Thông tin tác giả