Command shaping for flexible systems: A review of the first 50 years

Khalid, A., Huey, J., Singhose, W., Lawrence, J. and Frakes, D., “Human Operator Performance Testing Using an Input-Shaped Bridge Crane,” ASME J. of Dynamic Systems, Measurement, and Control, Vol. 128, No. 4, pp. 835–841, 2006.

Kim, D. and Singhose, W., “Studies of Human Operators Manipulating Double-Pendulum Cranes,” Proc. European Control Conference, pp. WeC10.1, 2007.

Manning, R., Kim, D. and Singhose, W., “Reduction of Distributed Payload Bridge Crane Oscillations,” Proc. WSEAS International Conference on Automatic Control, Modeling, and Simulation, pp. 133–139, 2008.

Smith, O. J. M., “Posicast Control of Damped Oscillatory Systems,” Proc. the IRE, Vol. 45, No. 9, pp. 1249–1255, 1957.

Smith, O. J. M., “Feedback Control Systems,” McGraw-Hill Book Co., Inc., 1958.

Tallman, G. H. and Smith, O. J. M., “Analog Study of Dead-Beat Posicast Control,” IRE Transactions on Automatic Control, Vol. 4, No. 1, pp. 14–21, 1958.

Tesar, D. and Mathew, G. K., “The Dynamic Synthesis, Analysis, and Design of Modeling Cam Systems,” Lexington Books, 1935.

Rothbart, H., “Cams: Design, Dynamics, and Accuracy,” John Wiley & Sins, Inc., 1956.

Kwakernaak, H. and Smith, J., “Minimum Vibration Cam Profiles,” J. of Mechanical Engineering Science, Vol. 10, pp. 219–227, 1968.

Wiederrich, J. L. and Roth, B., “Design of Low Vibration Cam Profiles,” Proc. Conference on Cams and Cam Mechanisms, 1974.

Gimpel, D. J. and Calvert, J. F., “Signal Component Control,” AIEE Transactions, pp. 339–343, 1952.

Calvert, J. F. and Gimpel, D. J., “Method and Apparatus for Control of System Output Response to System Input,” U.S. Patent No. 2801351, 1957.

Aspinwall, D. M., “Acceleration Profiles for Minimizing Residual Response,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 102, No. 3, pp. 3–6, 1980.

Swigert, C. J., “Shaped Torque Techniques,” Journal of Guidance and Control, Vol. 3, No. 5, pp. 460–467, 1980.

Turner, J. D. and Junkins, J. L., “Optimal Large-Angle Single-Axis Rotational Maneuvers of Flexible Spacecraft,” Journal of Guidance and Control, Vol. 3, pp. 578–585, 1980.

Meckl, P. H. and Seering, W. P., “Minimizing Residual Vibration for Point-to-Point Motion,” Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 107, No. 3, pp. 378–382, 1985.

Meckl, P. H. and Seering, W. P., “Experimental Evaluation of Shaped Inputs to Reduce Vibration for a Cartesian Robot,” J. of Dynamic Systems, Measurement, and Control, Vol. 112, No. 2, pp. 159–165, 1990.

Singer, N. C. and Seering, W. P., “Preshaping Command Inputs to Reduce System Vibration,” Journal of Dynamic Systems, Measurement, & Control, Vol. 112, No. 1, pp. 76–82, 1990.

Ogata, K., “Modern Control Engineering,” Prentice-Hall, Inc., p. 282, 1970.

Cook, G., “An Application of Half-Cycle Posicast,” IEEE Trans. on Automatic Control, Vol. 11, No. 3, pp. 556–559, 1966.

Shields, V. C. and Cook, G., “Application of an Approximate Time Delay to a Posicast Control System,” International Journal of Control, Vol. 14, No. 4, pp. 649–657, 1971.

Mee, D. H., “A Feedback Implementation of Posicast Control Using Sampling Circuits,” Proc. of the Institute of Radio and Electronics Engineering, pp. 11–15, 1974.

Singer, N. C. and Seering, W. P., “Using Acausal Shaping Techniques to Reduce Robot Vibration,” Proc. of the IEEE International Conference on Robotics and Automation, Vol. 3, pp. 1434–1439, 1988.

Singer, N. and Seering, W. P., “Experimental Verification of Command Shaping Methods for Controlling Residual Vibration in Flexible Robots,” Proc. of the American Control Conference, 1989.

Singer, N. C., “Residual Vibration Reduction in Computer Controlled Machines,” Mechanical Engineering, Ph. D. thesis, Massachusetts Institute of Technology, 1989.

Yurkovich, S., Tzes, A. P. and Hillsley, K. L., “Controlling Coupled Flexible Links Rotating in the Horizontal Plane,” Proc. of the American Control Conference, pp. 362–368, 1990.

Bhat, S. P. and Miu, D. K., “Precise Point-to-Point Positioning Control of Flexible Structures,” ASME Winter Annual Meeting, 1989.

Tzes, A. P., Englehart, M. J. and Yurkovich, S., “Input Preshaping With Frequency Domain Information For Flexible-Link Manipulator Control,” Proc. of the AIAA Guidance, Navigation and Control Conference, pp. 1167–1175, 1989.

Tzes, A. P. and Yurkovich, S., “Adaptive Precompensators for Flexible-Link Manipulator Control,” 28th IEEE Conference on Decision and Control, Vol. 3, pp. 2083–2088, 1989.

Bhat, S. P. and Miu, D. K., “Precise Point-to-Point Positioning Control of Flexible Structures,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 112, No. 4, pp. 667–674, 1990.

Bhat, S. P. and Miu, D. K., “Solutions to Point-to-Point Control Problems using Laplace Transform Technique,” Proc. American Control Conf., 1990.

Singh, T. and Vadali, S. R., “Robust Time-Delay Control,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 115, pp. 303–306, 1993.

Pao, L. Y. and Singhose, W. E., “Robust Minimum Time Control of Flexible Structures,” Automatica, Vol. 34, pp. 229–236, 1998.

Singhose, W. E., Seering, W. P. and Singer, N. C., “Shaping Inputs to Reduce Vibration: A Vector Diagram Approach,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 922–927, 1990.

Singhose, W., Seering, W. and Singer, N., “Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs,” J. of Mechanical Design, Vol. 116, pp. 654–659, 1994.

Park, U. H., Lee, J. W., Lim, B. D. and Sung, Y. G., “Design and Sensitivity Analysis of an Input Shaping Filter in the Z-Plane,” J. of Sound and Vibration, Vol. 243, pp. 157–171, 2001.

Singhose, W. E., Porter, L. J., Tuttle, T. D. and Singer, N. C., “Vibration Reduction Using Multi-Hump Input Shapers,” J. of Dynamic Systems, Measurement, and Control, Vol. 119, pp. 320–326, 1997.

Singer, N. C. and Seering, W. P., “An Extension of Command Shaping Methods for Controlling Residual Vibration Using Frequency Sampling,” Proc. IEEE International Conference on Robotics and Automation, pp. 800–805, 1992.

Singhose, W., Seering, W. and Singer, N., “Input Shaping for Vibration Reduction with Specified Insensitivity to Modeling Errors,” Proc. Japan-USA Sym. on Flexible Automation, pp. 307–313, 1996.

Singhose, W., Kim, D. and Kenison, M., “Input Shaping Control of Double-Pendulum Bridge Crane Oscillations,” ASME J. Dynamic Systems, Measurement, and Control, Vol. 130, p. 034504, 2008.

Pao, L. Y., Chang, T. N. and Hou, E., “Input Shaper Designs for Minimizing the Expected Level of Residual Vibration in Flexible Structures,” Proc. American Control Conf., pp. 3542–3546, 1997.

Pao, L. and Lau, M., “Robust Input Shaper Control Design for Parameter Variations in Flexible Structures,” J. of Dynamic Systems, Measurement, and Control, Vol. 122, pp. 63–70, 2000.

Tzes, A. and Yurkovich, S., “An Adaptive Input Shaping Control Scheme for Vibration Suppression in Slewing Flexible Structures,” IEEE Transactions on Control Systems Technology, Vol. 1, pp. 114–121, 1993.

Khorrami, F., Jain, S. and Tzes, A., “Experiments of Rigid-Body Based Controllers with Input Preshaping for a Two-Link Flexible Manipulator,” Proc. American Control Conf., pp. 2957–2961, 1992.

Khorrami, F., Jain, S. and Tzes, A., “Experimental results on adaptive nonlinear control and input preshaping for multi-link flexible manipulators,” Automatica, Vol. 31, pp. 83–97, 1995.

Khorrami, F., Jain, S. and Tzes, A., “Adaptive Nonlinear Control and Input Preshaping for Flexible-Link Manipulators,” Proc. American Control Conf., pp. 2705–2709, 1993.

Kojima, H. and Singhose, W., “Adaptive Deflection Limiting Control for Slewing Flexible Space Structures,” AIAA J. of Guidance, Control, and Dynamics, Vol. 30, pp. 61–67, 2007.

Bodson, M., “An Adaptive Algorithm for the Tuning of Two Input Shaping Methods,” Automatica, Vol. 34, pp. 771–776, 1998.

Park, J. and Chang, P. H., “Learning Input Shaping Technique for Not-LTI Systems,” Proc. American Control Conference, 1998.

Rhim, S. and Book, W., “Adaptive Time-delay Command Shaping Filter for Flexible Manipulator Control,” IEEE/ASME Trans. on Mechatronics, Vol. 9, pp. 619–626, 2004.

Park, J. and Rhim, S., “Extraction of Optimal Time-delay in Adaptive Command Shaping Filter for Flexible Manipulator Control,” J. of Inst. of Control, Robotics and System, Vol. 14, pp. 564–572, 2008.

Rhim, S. and Book, W., “Adaptive Command Shaping Using Adaptive Filter Approach in Time Domain,” Proc. American Control Conference, pp. 81–85, 1999.

Bodson, M., “Experimental Comparison of Two Input Shaping Methods for the Control of Resonant Systems,” Proc. IFAC World Congress, 1996.

Magee, D. P. and Book, W. J., “Implementing Modified Command Filtering to Eliminate Multiple Modes of Vibration,” Proc. American Controls Conference, pp. 2700–2704, 1993.

Magee, D. P. and Book, W. J., “Experimental Verification of Modified Command Shaping Using a Flexible Manipulator,” Proc. of the 1st International Conference on Motion and Vibration Control, 1992.

Rhim, S. and Book, W., “Noise Effect on Time-domain Adaptive Command Shaping Methods for Flexible Manipulator Control,” IEEE Trans. of Control Systems Technology, Vol. 9, pp. 84–92, 2001.

Cook, G., “Control of Flexible Structures Via Posicast,” Proc. Eighteenth Southeastern Symp. on System Theory, pp. 31–35, 1986.

Hyde, J. M. and Seering, W. P., “Inhibiting Multiple Mode Vibration in Controlled Flexible Systems,” Proc. American Control Conf., 1991.

Hyde, J. M. and Seering, W. P., “Using Input Command Pre Shaping to Suppress Multiple Mode Vibration,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 2604–2609, 1991.

Singhose, W. E., Crain, E. A. and Seering, W. P., “Convolved and Simultaneous Two-Mode Input Shapers,” IEE Control Theory and Applications, Vol. 144, pp. 515–520, 1997.

Sung, Y.-G. and Singhose, W., “Robustness Analysis of Input Shaping Commands for Two-mode Flexible Systems,” IET Control Theory and Applications, Vol. 3, pp. 722–730, 2009.

Hillsley, K. L. and Yurkovich, S., “Vibration Control of a Two-Link Flexible Robot Arm,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 2121–2126, 1991.

Magee, D. P. and Book, W. J., “Filtering Schilling Manipulator Commands to Prevent Flexible Structure Vibration,” Proc. American Control Conf., pp. 2538–2542, 1994.

Magee, D. P. and Book, W. J., “Filtering Micro-Manipulator Wrist Commands to Prevent Flexible Base Motion,” Proc. American Control Conf., pp. 924–928, 1995.

Magee, D. P. and Book, W. J., “Eliminating Multiple Modes of Vibration in a Flexible Manipulator,” Proc. of the IEEE International Conference on Robotics and Automation, pp. 474–479, 1993.

Hillsley, K. L. and Yurkovich, S., “Vibration Control of a Two-Link Flexible Robot Arm,” J. of Dynamics and Control, Vol. 3, pp. 261–280, 1993.

Banerjee, A. K., “Dynamics and Control of the WISP Shuttle-Antennae System,” J. of Astronautical Sciences, Vol. 41, pp. 73–90, 1993.

Banerjee, A. K. and Singhose, W. E., “Command Shaping in Tracking Control of a Two-Link Flexible Robot,” J. of Guidance, Control, and Dynamics, Vol. 21, pp. 1012–1015, 1998.

Singh, T. and Vadali, S. R., “Input-Shaped Control of Three-Dimensional Maneuvers of Flexible Spacecraft,” J. of Guidance, Control, and Dynamics, Vol. 16, pp. 1061–1068, 1993.

Sung, Y. G. and Wander, J. P., “Applications of Vibration Reduction of Flexible Space Structure Using Input Shaping Technique,” Proc. Southeastern IEEE Conference, pp. 333–336, 1993.

Tuttle, T. D. and Seering, W. P., “Vibration Reduction in 0-g Using Input Shaping on the MIT Middeck Active Control Experiment,” Proc. American Control Conf., pp. 919–923, 1995.

Tuttle, T. D. and Seering, W. P., “Vibration Reduction in Flexible Space Structures Using Input Shaping on MACE: Mission Results,” Proc. IFAC World Congress, pp. 55–60, 1996.

Banerjee, A., Pedreiro, N. and Singhose, W., “Vibration Reduction for Flexible Spacecraft Following Momentum Dumping with/without Slewing,” AIAA J. of Guidance, Control, and Dynamics, Vol. 24, pp. 417–428, 2001.

Robertson, M., Timm, A. and Singhose, W., “Evaluation of Command Generation Techniques for Tethered Satellite Retrieval,” Proc. AAS/AIAA Space Flight Mechanics Conference, 2005.

Hu, Q., “Input shaping and variable structure control for simultaneous precision positioning and vibration reduction of flexible spacecraft with saturation compensation,” Journal of Sound and Vibration, Vol. 318, pp. 18–35, 2008.

Kim, D. and Singhose, W., “Human Operator Learning On Double-Pendulum Bridge Cranes,” ASME IMECE, 2007.

Sorensen, K. L., Danielson, J. and Singhose, W. E., “Anti-Sway and Positioning Control For An Industrial Bridge Crane With Multi-Mode Dynamics,” Proc. ASME International Symposium on Flexible Automation, 2008.

Hong, K.-T. and Hong, K.-S., “Input Shaping and VSC of Container Cranes,” Proc. IEEE International Conference on Control Applications, pp. 1570–1575, 2004.

Singh, T. and Heppler, G. R., “Shaped Input Control of a System with Multiple Modes,” ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 115, pp. 341–347, 1993.

Lim, S. and How, J., “Input Command Shaping Techniques for Robust, High-Performance Control of Flexible Structures,” Proc. AIAA Guidance, Navigation, and Control Conf., 1996.

Lim, S., Stevens, H. D. and How, J. P., “Input Shaping Design for Multi-input Flexible Systems,” J. of Dynamic Systems, Measurement and Control, Vol. 121, pp. 443–447, 1999.

Cutforth, C. F. and Pao, L. Y., “A Modified Method for Multiple Actuator Input Shaping,” Proc. American Control Conf., pp. 66–70, 1999.

Pao, L. Y., “Multi-Input Shaping Design for Vibration Reduction,” Automatica, Vol. 35, pp. 81–89, 1999.

Vaughan, J. and Singhose, W., “Reducing Vibration and Providing Robustness with Multi-Input Shapers,” Proc. American Control Conference, 2009.

Kenison, M. and Singhose, W., “Concurrent Design of Input Shaping and Proportional Plus Derivative Feedback Control,” ASME J. of Dynamic Systems, Measurement, and Control, Vol. 124, pp. 398–405, 2002.

Muenchhof, M. and Singh, T., “Concurrent Feedforward/Feedback Controller Design Using Time-Delay Filters,” Proc. AIAA Guidance, Navigation and Control Conference, 2002.

Fortgang, J. and Singhose, W., “Concurrent Design of Vibration Absorbers and Input Shapers,” Journal of Dynamic Systems, Measurement, and Controls, Vol. 127, pp. 329–335, 2005.

Magee, D. P., Cannon, D. W. and Book, W. J., “Combined Command Shaping and Inertial Damping for Flexure Control,” Proc. American Control Conf., Vol. 3, pp. 1330–1334, 1997.

Pontryagin, L. S., Boltyanskii, V. G., Gamkrelidze, R. V. and Mishchenko, E. F., “The Mathematical Theory of Optimal Processes,” John Wiley & Sons, 1962.

Athens, M. and Falb, P. L., “Optimal Control,” McGraw-Hill, 1966.

Hermes, H. and Lasalle, J. P., “Functional Analysis and Time Optimal Control,” Academic Press, 1969.

Bryson, A. and Ho, Y.-C., “Applied Optimal Control,” Hemisphere Publishing, 1975.

Ben-Asher, J., Burns, J. A. and Cliff, E. M., “Time-Optimal Slewing of Flexible Spacecraft,” J. of Guidance, Control, and Dynamics, Vol. 15, pp. 360–367, 1992.

Vander Velde, W. and He, J., “Design of Space Structure Control Systems Using On-Off Thrusters,” Journal Guidance, Control and Dynamics, Vol. 6, No. 1, pp. 53–60, 1983.

Liu, Q. and Wie, B., “Robust Time-Optimal Control of Uncertain Flexible Spacecraft,” Journal of Guidance, Control, and Dynamics, Vol. 15, pp. 597–604, 1992.

Wie, B. and Liu, Q., “Comparison Between Robustified Feedforward and Feedback for Achieving Parameter Robustness,” Journal of Guidance, Control, and Dynamics, Vol. 15, pp. 935–943, 1992.

Wie, B., Sinha, R. and Liu, Q., “Robust Time-Optimal Control of Uncertain Structural Dynamic Systems,” J. of Guidance, Control, and Dynamics, Vol. 15, pp. 980–983, 1993.

Singh, T. and Vadali, S. R., “Robust Time-Optimal Control: A Frequency Domain Approach,” Journal of Guidance, Control and Dynamics, Vol. 17, pp. 346–353, 1994.

Singhose, W., Derezinski, S. and Singer, N., “Extra-Insensitive Input Shapers for Controlling Flexible Spacecraft,” J. of Guidance, Control, and Dynamics, Vol. 19, pp. 385–391, 1996.

Singhose, W., Bohlke, K. and Seering, W. “Fuel-Efficient Pulse Command Profiles for Flexible Spacecraft,” J. of Guidance, Control, and Dynamics, Vol. 19, pp. 954–960, 1996.

Wie, B., Sinha, R., Sunkel, J. and Cox, K., “Robust Fuel- and Time-Optimal Control of Uncertain Flexible Space Structures,” Proc. Guidance, Navigation, and Control Conference, pp. 939–948, 1993.

Singh, T., “Fuel/Time Optimal Control of the Benchmark Problem,” J. of Guidance, Control, and Dynamics, Vol. 18, pp. 1225–1231, 1995.

Meyer, J. L. and Silverberg, L., “Fuel Optimal Propulsive Maneuver of an Experimental Structure Exhibiting Spacelike Dynamics,” Journal of Guidance, Control, and Dynamics, Vol. 19, pp. 141–149, 1996.

Driessen, B. J., “On-off minimum-time control with limited fuel usage: Near global optima via linear programming,” Optimal Control Applications & Methods, Vol. 27, pp. 161–168, 2006.

Singhose, W., Singh, T. and Seering, W., “On-Off Control with Specified Fuel Usage,” Journal Dynamic Systems, Measurement, and Control, Vol. 121, pp. 206–212, 1999.

Singhose, W., Banerjee, A. and Seering, W., “Slewing Flexible Spacecraft with Deflection-Limiting Input Shaping,” J. of Guidance, Control, and Dynamics, Vol. 20, pp. 291–298, 1997.

Singhose, W., Mills, B. and Seering, W., “Closed-Form Methods for Generating On-Off Commands for Undamped Flexible Structures,” J. of Guidance, Control, and Dynamics, Vol. 22, pp. 378–382, 1999.

Dhanda, A. and Franklin, G., “Vibration Control via Preloading,” Proc. American Control Conference, pp. 3574–3579, 2005.

Singhose, W., Biediger, E., Okada, H. and Matunaga, S., “Closed-Form Specified-Fuel Commands for On-Off Thrusters,” AIAA J. of Guidance, Control, and Dynamics, Vol. 29, pp. 606–611, 2006.

Sung, Y.-G. and Singhose, W., “Closed-Form Specified-Fuel Commands for Two Flexible Modes,” AIAA Journal of Guidance, Control, and Dynamics, Vol. 30, pp. 1590–1596, 2007.

Robertson, M. J. and Singhose, W. E., “Specified-Deflection Command Shapers for Second-Order Position Input Systems,” ASME Journal of Dynamic Systems, Measurement and Control, Vol. 129, pp. 856–859, 2007.

Sung, Y.-G. and Singhose, W., “Deflection-Limiting Commands for Systems with Velocity Limits,” AIAA J. Guidance, Control, and Dynamics, Vol. 31, pp. 472–478, 2008.

Singhose, W., “Shaping Inputs to Reduce Vibration: A Vector Diagram Approach,” MIT Artificial Intelligence Lab, Memo No. 1223, 1990.

Rogers, K. and Seering, W. P., “Input Shaping for Limiting Loads and Vibration in Systems with On-Off Actuators,” Proc. AIAA Guidance, Navigation, and Control Conference, 1996.

Song, G., Buck, N. and Agrawal, B., “Spacecraft Vibration Reduction Using Pulse-Width Pulse-Frequency Modulated Input Shaper,” J. of Guidance, Control & Dynamics, Vol. 22, pp. 433–440, 1999.

Buffinton, K. W., Hoffman, K. L., Hekman, K. A. and Berg, M. C., “Optimal pulse-width control of flexible dynamic systems,” Proc. IASTED International Conference on Robotics and Applications, 2007.

Vaughan, J., Singhose, W., Debenest, P., Fukushima, E. and Hirose, S., “Initial Experiments on the Control of a Mobile Tower Crane,” ASME IMECE, 2007.

Danielson, J., Vaughan, J., Singhose, W., Widler, L. and Glauser, U., “Design of a Mobile Boom Crane for Research and Educational Applications,” Proc. International Conference on Motion and Vibration Control, 2008.

Parker, G. G., Groom, K., Hurtado, J. E., Feddema, J., Robinett, R. D. and Leban, F., “Experimental Verification of a Command Shaping Boom Crane Control System,” Proc. American Control Conference, pp. 86–90, 1999.

Masoud, Z. N. and Daqaq, M. F., “A Graphical Approach to Input-Shaping Control Design for Container Cranes with Hoist,” IEEE Transactions on Control Systems Technology, Vol. 14, No. 6, pp. 1070–1077, 2006.

Zrnić, N., Petković, Z. and Bošnjak, S., “Automation of Ship-To-Shore Container Cranes: A Review of State-of-the-Art,” FME Transactions, Vol. 33, pp. 111–121, 2005.

Park, B. J., Hong, K.-S. and Huh, C. D., “Time-Efficient Input Shaping Control of Container Cranes,” Proc. International Conference on Control Applications, pp. 80–85, 2000.

Daqaq, M. F. and Masoud, Z. N., “Nonlinear Input-Shaping Controller for Quay-Side Container Cranes,” Nonlinear Dynamics, Vol. 45, No. 1–2, pp. 149–170, 2006.

Yoon, J., Singhose, W., Kim, M. D., Ramirez, G. and Tawde, S. K., “Dynamics and Control of Bouncing and Tilting Crane Payloads,” ASME IDETC, 2009.

Jones, S. and Ulsoy, A. G., “An Approach to Control Input Shaping with Application to Coordinate Measuring Machines,” J. of Dynamics, Measurement, and Control, Vol. 121, pp. 242–247, 1999.

Seth, N., Rattan, K. and Brandstetter, R., “Vibration Control of a Coordinate Measuring Machine,” Proc. IEEE Conf. on Control Apps., pp. 368–373, 1993.

Singhose, W., Singer, N. and Seering, W., “Improving Repeatability of Coordinate Measuring Machines with Shaped Command Signals,” Precision Engineering, Vol. 18, pp. 138–146, 1996.

Fortgang, J., Singhose, W. and Márquez, J. d. J., “Command Shaping for Micro-Mills and CNC Controllers,” Proc. American Control Conference, 2005.

Singhose, W. and Singer, N., “Effects of Input Shaping on Two-Dimensional Trajectory Following,” IEEE Trans. on Robotics and Automation, Vol. 12, pp. 881–887, 1996.

deRoover, D., “Motion Control of a Wafer Stage,” Delft University Press, 1997.

Park, S.-W., Hong, S.-W., Choi, H.-S. and Singhose, W., “Discretization Effects of Real-Time Input Shaping in Residual Vibration Reduction for Precise XY Stage,” Trans. of the Korean Society of Machine Tool Engineers, Vol. 16, pp. 71–78, 2007.

Vaughan, J., Yano, A. and Singhose, W., “Comparison of Robust Input Shapers,” Journal of Sound and Vibration, Vol. 315, pp. 797–815, 2008.

Vaughan, J., Yano, A. and Singhose, W., “Robust Negative Input Shapers for Vibration Suppression,” ASME J. Dynamic Systems, Measurement, and Control, Vol. 131, pp. 031014-1–9, 2009.

Starr, G. P., “Swing-Free Transport of Suspended Objects with a Path-Controlled Robot Manipulator,” J. of Dynamic Systems, Measurement and Control, Vol. 107, pp. 97–100, 1985.

Murphy, B. R. and Watanabe, I., “Digital Shaping Filters for Reducing Machine Vibration,” IEEE Transactions on Robotics and Automation, Vol. 8, pp. 285–289, 1992.

Feddema, J. T., “Digital Filter Control of Remotely Operated Flexible Robotic Structures,” Proc. American Control Conf., pp. 2710–2715, 1993.

Yano, K. and Terashima, K., “Sloshing suppression control of liquid transfer systems considering a 3-D transfer path,” IEEE-ASME Transactions on Mechatronics, Vol. 10, pp. 8–16, 2005.

Feddema, J., Dohrmann, C., Parker, G., Robinett, R., Romero, V. and Schmitt, D., “Control for Slosh-Free Motion of an Open Container,” IEEE Control Systems, Vol. 17, pp. 29–36, 1997.

Zou, K., Drapeau, V. and Wang, D., “Closed Loop Shaped-Input Strategies for Flexible Robots,” Int. J. of Robotics Research, Vol. 14, pp. 510–529, 1995.

Rappole, B. W., Singer, N. C. and Seering, W. P., “Multiple-Mode Impulse Shaping Sequences for Reducing Residual Vibrations,” Proc. 23rd Biennial Mechanisms Conference, pp. 11–16, 1994.

Kwon, D.-S., Hwang, D.-H., Babcock, S. M. and Burks, B. L., “Input Shaping Filter Methods for the Control of Structurally Flexible, Long-Reach Manipulators,” Proc. IEEE Conf. on Robotics and Automation, pp. 3259–3264, 1994.

Chang, T., Godbole, K. and Hou, E., “Optimal input shaper design for high-speed robotic workcells,” Journal of Vibration and Control, Vol. 9, pp. 1359–1376, 2003.

Grosser, K. and Singhose, W., “Command Generation for Reducing Perceived Lag in Flexible Telerobotic Arms,” JSME International Journal, Vol. 43, pp. 755–761, 2000.

Wilson, D. G., Stokes, D., Starr, G. and Robinett, R. D., “Optimized Input Shaping for a Single Flexible Robot Link,” SPACE 96: 5th International Conf. and Expo. on Engineering, Construction, and Operations in Space, 1996.

Singhose, W., “Trajectory Planning for Flexible Robots: CRC Robotics and Automation Handbook, T. Kurfess, Ed.,” CRC Press, 2004.

Mohamed, Z. and Tokhi, M. O., “Command Shaping Techniques for Vibration Control of a Flexible Robot Manipulator,” Mechatronics, Vol. 14, pp. 69–90, 2004.

Alici, G. U., Kapucu, S. and Baysec, S., “A Robust Motion Design Technique for Flexible-Jointed Manipulation Systems,” Robotica, Vol. 24, pp. 95–103, 2006.

Chang, T., Jaroonsiriphan, P., Bernhardt, M. and Ludden, P., “Web-based command shaping of cobra 600 robot with a swinging load,” IEEE Transactions on Industrial Informatics, Vol. 2, pp. 59–69, 2006.

Freese, M., Fukushima, E., Hirose, S. and Singhose, W., “Endpoint Vibration Control of a Mobile Mine-Detecting Robotic Manipulator,” Proc. American Control Conference, 2007.

Gurleyuk, S. S., “Optimal unity-magnitude input shaper duration analysis,” Archive of Applied Mechanics, Vol. 77, pp. 63–71, 2007.

Huey, J. R., Sorensen, K. L. and Singhose, W. E., “Useful Applications of Closed-Loop Signal Shaping Controllers,” Control Engineering Practice, Vol. 16, pp. 836–846, 2008.

Kinceler, R. and Meckl, P. H., “Corrective Input Shaping for a Flexible-joint Manipulator,” Proc. American Control Conference, pp. 1335–1339, 1997.

Kozak, K., Singhose, W. and Ebert-Uphoff, I., “Performance Measures For Input Shaping and Command Generation,” ASME J. Dynamic Systems, Meas., & Control, Vol. 128, pp. 731–736, 2006.

Parker, G. G., Eisler, G. R., Phelan, J. and Robinett, R. D., “Input Shaping for Vibration-Damped Slewing of a Flexible Beam Using a Heavy-Lift Hydraulic Robot,” Proc. American Control Conf., 1994.

Tokhi, M. O. and Mohamed, Z., “Combined Input Shaping and Feedback Control of a Flexible Manipulator,” 10th International Congress on Sound and Vibration, pp. 299–306, 2003.

Sung, Y.-G. and Lee, K.-T., “An Adaptive Tracking Controller for Vibration Reduction of Flexible Manipulator,” IJPEM, Vol. 7, No. 3, pp. 51–55, 2006.

Jung, J.-K., Youm, W.-S. and Park, K.-H., “Vibration Reduction Control of a Voice Coil Motor (VCM) Nano Scanner,” IJPEM, Vol. 10, No. 3, pp. 167–170, 2009.

Rathbun, D. B., Berg, M. C. and Buffinton, K. W., “Pulse width control for precise positioning of structurally flexible systems subject to stiction and coulomb friction,” J. of Dynamic Systems, Measurement and Control, Vol. 126, pp. 131–138, 2004.

Lawrence, J., Singhose, W. and Hekman, K., “Friction-Compensating Input Shaping for Vibration Reduction,” ASME J. of Vibration and Acoustics, Vol. 127, pp. 307–314, 2005.

Robertson, M. J. and Erwin, R., “Command Shapers for Systems with Actuator Saturation,” Proc. American Control Conference, pp. 760–765, 2007.

Andersch, P., Sorensen, K. and Singhose, W., “Effects of Rate Limiting on Common Input Shaping Filters,” Recent Advances in Systems Engineering and Applied Mathematics, pp. 33–38, 2008.

Meckl, P. H., Arestides, P. B. and Woods, M. C., “Optimized S-Curve Motion Profiles for Minimum Residual Vibration,” Proc. American Control Conference, pp. 2627–2631, 1998.

Singh, T., “Jerk Limited Input Shapers,” J. of Dynamic Systems, Measurement, and Controls, Vol. 126, pp. 215–219, 2004.

Danielson, J., Lawrence, J. and Singhose, W., “Command Shaping for Flexible Systems Subject to Constant Acceleration Limits,” ASME J. of Dynamic Systems, Meas., and Control, Vol. 130, pp. 0510111–0510118, 2008.

Pao, L. Y. and La-Orpacharapan, C., “Shaped Time-Optimal Feedback Controllers for Flexible Structures,” J. Dynamic Systems, Measurement, and Control, Vol. 126, pp. 173–186, 2004.

Banerjee, A., Singhose, W. and Blackburn, D., “Orbit Boosting of an Electrodynamic Tethered Satellite with Input-Shaped Current,” Proc. AAS/AIAA Astrodynamics Specialist Conference, 2005.

Parman, S. and Koguchi, H., “Controlling the attitude maneuvers of flexible spacecraft by using time-optimal/fuelefficient shaped inputs,” Journal of Sound and Vibration, Vol. 221, pp. 545–565, 1999.

Gorinevsky, D. and Vukovich, G., “Nonlinear Input Shaping Control of Flexible Spacecraft Reorientation Maneuver,” J. of Guidance, Control, and Dynamics, Vol. 21, pp. 264–270, 1998.

Biediger, E., Singhose, W., Okada, H. and Matunaga, S., “Trajectory Planning for Coordinating Satellites using Command Generation,” Proc. 10th International Space Conference of Pacific-basin Societies, 2003.

Singhose, W., Biediger, E., Okada, H. and Matunaga, S., “Experimental Verification of Real-Time Control for Flexible Systems with On-Off Actuators,” ASME J. of Dynamic Systems, Measurement, and Controls, Vol. 128, pp. 287–296, 2006.

Ninneman, R. and Denoyer, K., “Middeck Active Control Experiment Reflight (MACE II): Lessons learned and reflight status,” Proc. of SPIE — The International Society for Optical Engineering, pp. 131–137, 2000.

Tuttle, T. and Seering, W., “Experimental Verification of Vibration Reduction in Flexible Spacecraft Using Input Shaping,” J. of Guidance, Control, and Dynamics, Vol. 20, pp. 658–664, 1997.