Characterization of Solidification Path for Aluminium 6060 Weld Metal with Variable 4043 Filler Dilution

Metzger G.E.: Some mechanical properties of weld in 6061 aluminum alloy sheet, Welding Journal, 1967, 46, pp. 457s–469s.

Dudas J.H., Collins F.R.: Preventing weld cracks in high-strength aluminium alloys, Welding Journal, 1966, 45, pp. 241s–249s.

Mousavi M.G., Cross C.E., Grong Ø., Hval M.: Controlling weld metal dilution for optimized weld performance in aluminium, Sci. Tech. Weld. Joining, 1997, 2, pp. 275–278.

Mondolfo L.F.: Aluminum alloys-structure & properties, Butterworths, 1976.

Jennings P.H., Singer A.R.E., Pumphrey W.I.: Hot-shortness of some high-purity alloys in the systems Al-Cu-Si and Al-Mg-Si, J. Inst. Metals, 1948, 74, pp. 227–248.

Skjerpe P.: Intermetallic phases formed during DC-casting of an Al-0.25 Wt Pct Fe-0.13 Wt Pct Si alloy, Met. Trans., 1987, 18A, pp. 189–200.

Westengen H.: Formation of intermetallic compounds during DC casting of a commercial purity Al-Fe-Si alloy, Z. Metallkde., 1982, 73, pp. 360–368.

Lu L., Dahle A.K.: Iron-rich Intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys, Met. Mat. Trans., 2005, 36A, pp. 819–835.

Mousavi M.G., Cross C.E., Grong Ø.: The effect of high temperature eutectic forming impurities on aluminum 7108 weldability, presented at AWS Conf. in April 2000, to be submitted to Welding Journal for publication, 2006.

Eskin D.G., Suyitno W.H., Katgerman L.: Mechanical properties in the semi-solid state and hot tearing of aluminium alloys, Progress in Materials Science, 2004, 49, pp. 629–711.

Cross C.E.: On the Origin of weld solidification cracking, in Hot Cracking Phenomena in Welds, Springer Pub., 2005, pp. 3–18.

Zacharia T.: Dynamic Stresses in weld metal hot cracking, Welding Journal, 1994, 73, pp. 164s–172s.

Dike J.J., Brooks J.A., Li M.: Comparison of failure criteria in weld solidification cracking simulations, in Mathematical Modelling of Weld Phenomena 4, Inst. Materials, London, 1998, pp. 199–222.

Pumphrey W.I., Jennings P.H.: A consideration of the nature of brittleness and temperature above the solidus in castings and welds in aluminum alloys, J. Inst. Metals, 1948, 75, pp. 235–256.

Pellini W.S.: Strain theory for hot tearing, Foundry, 1952, 80, pp. 125–199.

Rappaz M., Drezet J.M., Gremaud M.: A new hot-tearing criterion, Met. Mat. Trans., 1999, 30A, pp. 449–455.

Feuer U.: Influence of alloy composition and solidification conditions on dendrite arm spacing, feeding, and hot tear properties of aluminum alloys, in Proc. Int. Symposium on Engineering Alloys, 1977, pp. 131–145.

Bäckerud L., Krol E., Tamminen J.: Solidification characteristics of aluminium alloys, vol. 1, Skanaluminium, Oslo, 1986.

Bäckerud L., Krol E., Tamminen J.: Solidification characteristics of aluminium alloys, vol. 2, Skanaluminium, Oslo, 1986.

Bäckerud L., Krol, E., Tamminen J.: Solidification Characteristics of aluminium alloys, vol. 3, Skanaluminium, Oslo, 1986.

Alexandrov B.T., Lippold J.C.: Relationship between the solidification temperature range and weld solidification cracking susceptibility of stainless steels and Ni-base alloys, IIWDoc. IX-2163–05, IIW Prague, 2005.

Alexandrov B.T., Lippold J.C.: A new methodology for studying phase transformations in high strength steel weld metal, in ASM Conf. Proc., Trends in Welding Research, Pine Mtn., Georgia, 2005, in print.

Hanemann H., Schrader A.: Atlas Metallographicus, 1941, 3.

Van Horn K.R.: Aluminum properties, physical metallurgy, and phase diagrams, vol. 1, American Society of Metals, Ohio, 1967.

Cross C.E., Böllinghaus Th.: The effect of restraint on solidification cracking in aluminum, in Proc. IIW Int. Conf., Prague, 2005, pp. 458-463, Document IIW-1759-06 (ex Doc. IX-2215-06/IX-NF-02–06), Welding in the World, 2006, Vol. 50, No. 11/12, pp. 51–54.

Prokhorov N.N.: The problem of the strength of metals while solidifying during welding, Svarochnoe Proizvodstvo, 1956, 6, pp. 5–11.

Senda T., Matsuda F., Takano G.: Studies on solidification crack susceptibility for weld metals with Trans-Varestraint test, J. Japan Weld. Soc., 1973, 42, pp. 48–56.

Cross C.E., Olson D.L.: Hot tearing model to asses aluminum weldability, Conf. Proc. Aluminum Alloys, Charlotsville, 1986, pp. 1869–1875.