Bioceramic hydroxyapatite-based scaffold with a porous structure using honeycomb as a natural polymeric Porogen for bone tissue engineering

Biomaterials Research - Tập 25 Số 1 - 2021
Mona Sari1, Puspa Hening2, Chotimah1, Ika Dewi Ana3, Yusril Yusuf1
1Department of Physics, Faculty of Mathematics and Natural Science, Universitas Gadjah Mada, Yogyakarta, Indonesia
2Integrated Laboratory for Research and Testing, Universitas Gadjah Mada, Yogyakarta, Indonesia
3Department of Dental Biomedical Sciences, Faculty of Dentistry, Universitas Gadjah Mada, Yogyakarta, Indonesia

Tóm tắt

Abstract Background The application of bioceramic hydroxyapatite (HA) derived from materials high in calcium to tissue engineering has been of concern, namely scaffold. Scaffold pores allow for cell mobility metabolic processes, and delivery of oxygen and nutrients by blood vessel. Thus, pore architecture affects cell seeding efficiency, cell viability, migration, morphology, cell proliferation, cell differentiation, angiogenesis, mechanical strength of scaffolds, and, eventually, bone formation. Therefore, to improve the efficacy of bone regeneration, several important parameters of the pore architecture of scaffolds must be carefully controlled, including pore size, geometry, orientation, uniformity, interconnectivity, and porosity, which are interrelated and whose coordination affects the effectiveness of bone tissue engineering. The honeycomb (HCB) as natural polymeric porogen is used to pore forming agent of scaffolds. It is unique for fully interconnected and oriented pores of uniform size and high mechanical strength in the direction of the pores. The aim of this study was therefore to evaluate the effect of HCB concentration on macropore structure of the scaffolds. Methods Bioceramic hydroxyapatite (HA) was synthesized from abalone mussel shells ( Halioitis asinina ) using a precipitation method, and HA-based scaffolds were fabricated with honeycomb (HCB) as the porogen agent. Pore structure engineering was successfully carried out using HCB at concentrations of 10, 20, and 30 wt%. Results The Energy Dispersive X-Ray Spectroscopy (EDS) analysis revealed that the Ca/P molar ratio of HA was 1.67 (the stoichiometric ratio of HA). The Fourier Transform Infrared Spectroscopy (FTIR) spectra results for porous HA-based scaffolds and synthesized HA showed that no chemical decomposition occurred in the HA-based scaffold fabrication process. The porosity of the scaffold tended to increase when higher concentrations of HCB were added. XRD data show that the HCB was completely degraded from the scaffold material. The cell metabolic activity and morphology of the HA + HCB 30 wt% scaffold enable it to facilitate the attachment of MC3T3E1 cells on its surface. Conclusion HCB 30 wt% is the best concentration to fabricate the scaffold corresponding to the criteria for pores structure, crystallographic properties, chemical decomposition process and cell viability for bone tissue engineering.

Từ khóa


Tài liệu tham khảo

10.1080/21870764.2019.1595927

Mawuntu VJ Yusuf Y. Porous-structure engineering of hydroxyapatite-based scaffold synthesized from Pomacea canaliculata shell by using polyethylene oxide as polymeric porogen. IOP Conference Series Mater Sci Eng. 2018;432. https://doi.org/10.1088/1757-899X/432/1/012045.

10.1007/978-981-13-0947-2_16

10.1007/978-3-319-78951-4_7

10.1016/j.ceramint.2016.11.163

Sari M, Yusuf Y. Synthesis and characterization of hydroxyapatite based on green mussel shells (Perna viridis) with calcination temperature variation using the precipitation method. Int J Nanoelectronis Material. 2018;11(3):357–370.

10.1016/j.heliyon.2019.e01588

10.1016/j.msec.2014.08.058

10.1016/j.powtec.2012.08.030

10.1016/j.ceramint.2015.07.067

10.1016/j.ceramint.2019.07.103

Gecim G Donmez S Erkoc E. Calcium deficient hydroxyapatite by precipitation : Continuous process by vortex reactor and semi-batch synthesis. 2021;47:1917–28. https://doi.org/10.1016/j.ceramint.2020.09.020.

10.1016/j.ceramint.2010.08.032

10.1016/j.ceramint.2013.03.094

10.1016/j.jascer.2015.12.002

10.14456/kkuenj.2015.30

10.1016/j.msec.2018.12.027

10.1016/j.msec.2018.12.027

10.1016/j.ijbiomac.2015.03.064

Nazarov R Jin H Kaplan DL. Porous 3-D scaffolds from regenerated silk fibroin. Biomacromolecules. 2004:718–26. https://doi.org/10.1021/bm034327e.

10.1016/S0142-9612(02)00077-7

10.1016/j.vacuum.2020.109316

Ishikawa K Munar ML Tsuru K Miyamoto Y. Fabrication of carbonate apatite honeycomb and its tissue response. J Biomed Mater Res Part A. 2019:1014–20. https://doi.org/10.1002/jbm.a.36640.

10.1080/13588265.2018.1480471

10.1016/j.mtbio.2019.100031

10.1016/j.msec.2019.110347

10.1016/j.ijbiomac.2020.04.267

10.4028/www.scientific.net/KEM.377.19

10.1023/A:1004605014652

10.1016/j.polymer.2013.09.041

Ghavidel N Xian M Marianne L Hoemann CD Favis BD. Poly ( e -caprolactone) scaffolds of highly controlled porosity and interconnectivity derived from co-continuous polymer blends : model bead and cell infiltration behavior. J Mater Sci Mater Med. 2014:2083–93. https://doi.org/10.1007/s10856-014-5256-7.

10.1016/j.irbm.2020.05.007

10.1016/j.apsusc.2010.02.053

10.1016/j.jascer.2014.01.002

Thông tin
Thông tin xuất bản

Biomaterials Research

Tập 25 Số 1

Thông tin tác giả