Analytical engineering models of high speed normal impact by hard projectiles on metal shields

Børvik, T., Langseth, M., Hopperstad, O.S., Malo, K.A. (1998). Empirical equations for ballistic penetration of metal plates. Fortifikatorisk Notat No. 260/98. The Norwegian Defence Construction Service, Central Staff — Technical Division, Oslo, Norway. Backman, M., Goldsmith, W. (1978). The mechanics of penetration of projectiles into targets. Int. J. of Engineering Science, 16(1): 1–99. Jonas, G.H., Zukas, J.A. (1978). Mechanics of penetration: analysis and experiment. Int. J. of Engineering Science, 16(1): 879–903. Neilson, A.J. (1985). Empirical equations for the perforation of mikd steel plates. Int. J. of Impact Engineering, 3(2): 137–142. Brown, S.J. (1986). Energy release protection for pressurized systems. Part 2. Review of studies into impact/terminal ballistics. Applied Mechanics Reviews, 39(2), Part 1: 177–202. Anderson, C.E., Jr., Bodner S.R. (1988). Ballistic impact: the status of analytical and numerical modeling. Int. J. of Impact Engineering, 11(1): 33–40. Aptukov, V.N. (1990). Penetration: Mechanical aspects and mathemanical modeling (Review). Strength of Materials, 22(2): 230–240. Amde, A.M., Mirmiran, A., Walter, T.A. (1996). Local damage assessment of metal barriers under turbine missile impacts. J. of Structural Engineering, 122(1): 99–108 Corbett, G.G., Reid, S.R., Johnson, W. (1996). Impact loading of plates and shells by free flying projectiles: a review. Int. J. of Impact Engineering, 18(2): 141–230. Ben-Dor, G., Dubinsky, A., Elperin, T. (2005). Ballistic impact: recent advances in analytical modeling of plate penetration dynamics. A Review. ASME Applied Mechanics Reviews, 58: 355–371. Aly, S.Y., Li, Q.M. (2008). Critical impact energy for the perforation of metallic plates. Nuclear Engineering and Design, 238(10): 2521–2528. Zukas, J.A. (1982). Penetration and perforation of solids. In: Zukas J.A., Nicholas, T., Swift, H.F., Greszczuk, L.B., Curran, D.R., eds. Impact Dynamics. J. Wiley and Sons, New York, pp. 155–214. Recht, R.F. (1990). High velocity impact dynamics: Analytical modeling of plate penetration dynamics. In: Zukas, J.A., ed. High Velocity Impact Dynamics. John Wiley and Sons, New York, pp. 443–513. Zukas, J.A., Walters, W.P. (1990). Analytical models for kinetic energy penetration. In: Zukas J.A., ed. High Velocity Impact Dynamics. John Wiley and Sons, New York, pp. 405–441. Bulson, P.S. (1997). Explosive Loading of Engineering Structures. A History of Research and a Review of Recent Developments. E&FN Spon, London. Bangash, M.Y., Bangash, H.T. (2006). Explosion — Resistant Buildigs: Design, Analysis, and Case Studies. Springer, Heidelberg, Berlin. Grigoryan, V.A. (2006). Particular Problems of Terminal Ballistics. MGTU imeni N.E. Baumana, Moscow (in Russian). Carlucci, D.E., Jacobson, S.S. (2008). Ballistics. Theory and Design of Guns and Ammunition. CRC Press. Bangash, M.Y.H. (2009). Shock, Impact and Explosion: Structural Analysis and Design. Springer, Berlin. Szuladziñski, G. (2010). Formulas Mechanical and Structural Shock and Impact. CRC Press, Bosa Roca. Ben-Dor, G., Dubinsky, A., Elperin, T. (1997a). Area rules for penetrating bodies. Theoretical and Applied Fracture Mechanics, 26(3): 193–198. Ben-Dor, G., Dubinsky, A., Elperin, T. (2006). Applied High-Speed Plate Penetration Dynamics. Springer, Dordrecht. Ben-Dor, G., Dubinsky, A., Elperin, T. (1997). Optimal 3D impactors penetrating into layered targets. Theoretical and Applied Fracture Mechanics, 27(3): 161–166. Ben-Dor, G., Dubinsky, A., Elperin, T. (1998). On the ballistic resistance of multi layered targets with air gaps. Int. J. of Solids and Structures, 35(23): 3097–3103. Alekseeva, E.V., Barantsev, R.G. (1976). Local Method of Aerodynamic Calculations in Rarefied Gas. Leningrad State University Press, Leningrad (in Russian). Bunimovich, A.I., Dubinsky, A. (1995). Mathematical Models and Methods of Localized Interaction Theory. World Scientific, Singapore. Miroshin, R.N., Khalidov, U.A. (1991). Locaized Interaction Theory. Leningrad State University Press, Leningrad (in Russian). Miroshin, R.N., Khalidov, U.A. (2002). Local Methods in Continuum Mechanics. St.-Petersburg University Press, St.-Petersburg (in Russian). Ben-Dor, G., Dubinsky, A., Elperin, T. (2012). Shape optimization of high-speed penetrators: a review. Central European Journal of Engineering, 2(4): 473–482 Ben-Dor, G., Dubinsky, A., Elperin, T. (2012). Investigation and optimization of protective properties of metal multi-layered shields: A Review. International Journal of Protective Structures, 3(3): 275–291. Hopkins, H.G. (1960). Dynamic expansion of spherical cavities in metals. In: Hill, R. and Sneddon, I.N., eds. Progress in Solid Mechanics, 1. Pergamon Press, Oxford, pp. 84–164. Yu, H.S. (2000). Cavity Expansion Methods in Geomechanics. Kluwer, Dordrecht. Teland, J.A. (1999). A review of analytical penetration mechanics. Report FFI/RAPPORT 99/01264. Norwegian Defence Research Establishment (FFI), Kjeller, Norway. Satapathy, S., (1997). Application of cavity expansion analysis to penetration problems. Report IAT.R 0136. The University of Texas at Austin, Institute for Advanced Technology, Austin, TX. Bernard, R.S., Hanagud S.V. (1975). Development of a projectile penetration theory. Report S-75-9. Penetration Theory for shallow to moderate depths (Report 1 of Series). U.S. Army Engineer Waterways Experiment Station, Vicksburg, MS. Sagomonyan, A.Ya. (1960). Penetration of sharp bodies of revolution into soils. Doklady Akademii Nauk SSSR, 134(6): 1320–1323 (in Russian). Rahmatulin, K.A., Sagomonyan, A.Ya., Alekseev, N.A. (1964). Soils Dynamics. Moscow State University Press, Moscow (in Russian). Yankelevsky, D.Z., Adin, M.A. (1980). A simplified analytical method for soil penetration analysis. Int. J. for Numerical and Analytical Methods in Geomechanics, 4(3): 233–254. Bishop, R.F., Hill, R., Mott, N.F. (1945). The theory of indentation and hardness tests. Proceedings of the Physical Society, 57(321), Part 3: 147–155. Hill, R. (1950). The Mathematical Theory of Plasticity. Clarendon Press, Oxford. Masri, R., Durban, D. (2007). Cylindrical cavity expansion in compressible Mises and Tresca solids. European J. of Mechanics. A/Solids, 26(4): 712–727. Masri, R., Cohen T., Durban, D. (2010). Enlargement of a circular hole in a thin plastic sheet: taylorbethe controversy in retrospect. Quarterly J. of Mechanics and Applied Mathematics, 63(4): 589–616. Cohen, T., Masri, R., Durban, D. (2010). Ballistic limit predictions with quasi-static cavitation fields. Int. J. of Protective Structures, 1(2): 235–255. Rosenberg, Z., Dekel, E. (2009). On the deep penetration and plate perforation by rigid projectiles. Int. J. of Solids and Structures, 46(24): 4169–4180. Rosenberg, Z., Dekel, E. (2010). Revisiting the perforation of ductile plates by sharp-nosed rigid projectiles. Int. J. of Solids and Structures, 47(22-23): 3022–3033. Rosenberg, Z., Dekel, E. (2012). Terminal Ballistics. Springer. Forrestal, M.J., Okajima, K., Luk, V.K. (1988). Penetration of 6061 T651 aluminum target with rigid long rods. J. of Applied Mechanics, 55(4): 755–760. Forrestal, M.J., Luk, V.K. (1988). Dynamic spherical cavity expansion in a compressible elastic plastic solid. J. of Applied Mechanics, 55(2): 275–279. Forrestal, M.J. (1986). Penetration into dry porous rock. Int. J. of Solids and Structures, 22(12): 1485–1500. Forrestal, M.J., Luk, V.K., Brar, N.S. (1990). Perforation of aluminum armor plates with conical nose projectiles. Mechanics of Materials, 10(1–2): 97–105. Forrestal, M.J., Romero, L.A. (2007). Comment on “Perforation of aluminum plates with ogive-nose steel rods at normal and oblique impacts” (Int. J. of Impact Engineering 1996; 18: 877–887). Int. J. of Impact Engineering, 34(12): 1962–1964. Luk, V.K., Amos, D.E. (1991). Dynamic cylindrical cavity expansion of compressible strain hardering materials. J. of Applied Mechanics, 58(2): 334–340. Luk, V.K., Forrestal, M.J., Amos, D.E. (1991). Dynamic spherical cavity expansion of strain hardening materials. J. of Applied Mechanics, 58(1): 1–6. Forrestal, M.J., Brar, N.S., Luk, V.K. (1991). Perforation of strain hardening targets with rigid spherical nose rods. J. of Applied Mechanics, 58(1): 7–10. Forrestal, M.J., Luk, V.K., Rosenberg, Z., Brar N.S. (1992). Penetration of 7075-T651 aluminum targets with ogival nose rods. Int. J. of Solids and Structures, 29(14/15): 1729–1736. Warren, T.L., Forrestal, M.J. (1998). Effect of strain hardening and strain rate sensitivity on penetration of aluminum targets with spherical nosed rods. Int. J. of Solids and Structures, 35(28–29): 3737–3753. Warren, T.L. (1999). The effect of strain rate on the dynamic expansion of cylindrical cavities. J. of Applied Mechanics, 66(3): 818–821. Chakrabarty, J. (2010). Applied Plasticity. Springer, New York. Yadav, S., Chichilli, D.R., Ramesh, K.T. (1995). The mechanical response of a 6061-T6 Al/AI203 metal matrix composite at high rates of deformation. Acta Metallurgica et Materialia, 43(12): 4453–4464. Masri, R., Durban, D. (2005). Dynamic spherical cavity expansion in an elastoplastic compressible mises solid. J. of Applied Mechanics, 72(6): 887–898. Masri, R., Durban, D. (2006). Dynamic cylindrical cavity expansion in an incompressible elastoplastic medium. Acta Mechanica, 181(1–2): 105–123. Masri, R., Durban, D. (2009). Deep penetration analysis with dynamic cylindrical cavitation fields. Int. J. of Impact Engineering, 36(6): 830–841. Rosenberg, Z., Dekel, E. (2008). A numerical study of the cavity expansion process and its application to long-rod penetration mechanics. Int. J. of Impact Engineering, 35(3): 147–154. Rosenberg, Z., Dekel, E. (2009). Analytical solution of the spherical cavity expansion process. Int. J. of Impact Engineering, 36(2): 193–198. Rosenberg, Z., Dekel, E. (2009). The penetration of rigid long rods — revisited. Int. J. of Impact Engineering, 36(4): 551–564. Goodier, J.N. (1965). On the mechanics of indentation and cratering in solid targets of strain-hardening metal by impact of hard and soft spheres. In: Proc.of 7th Hypervelocity Impact Symp. (17–19 November, 1964, Tampa, FL), vol. 3, pp. 215–260. Forrestal, M.J., Tzou, D.Y., Askar, E., Longcope, D.B. (1995). Penetration into ductile metal targets with rigid spherical nose rods. Int. J. of Impact Engineering, 16(5/6): 699–710. Sagomonyan, A.Ya. (1975). Plate piercing by slender solid projectile. Moscow University Mechanics Bulletin, 30(5–6): 26–31. Ben-Dor, G., Dubinsky, A., Elperin, T. (2000). Analytical solution for penetration by rigid conical impactors using cavity expansion models. Mechanics Research Communications, 27(2): 185–189. Sagomonyan, A.Ya. (1988). Dynamics of Barriers Perforation. Moscow State University Press, Moscow (in Russian). Aptukov, V.N., Murzakaev, A.V., Fonarev, A.V. (1992). Applied Theory of Penetration. Nauka, Moscow (in Russian). Aptukov, V.N. (1991). Expansion of a spherical cavity in a compressible elasto plastic medium. II. Effect of inertial forces. Temperature effects. Strength of Materials, 23(12): 1269–1274. Li, X.L., Liu, C.L., Huang, F.L., Wu, H.J., Chen, Y.Z., Chen, X.W. (2007). On the normal perforation of thick metallic plates by a sharp nose rigid projectile. In: Proc. of the 23rd Int. Symp.on Ballistics (16–20 April, 2007, Tarragona, Spain), vol. 2, pp. 1173–1180. Chen, X.W., Li, X.L., Deng, K.W. (2008). Damping function in the penetration/perforation dynamics of rigid projectiles. In: Jones, N. and Brebbia, C.A., eds. Structures Under Shock and Impact X. WIT Press, Southampton, pp. 263–272. Chen, X.W., Li, X.L., Huang, F.L., Wu, H.J., Chen, Y.Z. (2008). Damping function in the penetration/perforation struck by rigid projectiles. Int. J. of Impact Engineering, 35(11): 1314–1325. Recht, R.F., Ipson, T.W. (1963). Ballistic perforation dynamics. J. of Applied Mechanics, 30(3): 384–390. Zaid, A.I.O., El Kalai, A., Travis, F.W. (1973). An examination of the perforation of mild steel plate by a flat ended cylindrical projectile. Int. J. of Mechanical Science, 15(2): 129–143. Bethe, H.A. (1941). Attempt of a theory of armor penetration. Report. Ordnance Laboratory, Frankford Arsenal, Philadelphia, PA. Hill, R. (1950). A theory of the plastic bulging of a metal diaphragm by lateral pressure. Philosophical Magazine. Series 7, 41(322): 1133–1142. Taylor, G.I. (1948). The formation and enlargement of a circular hole in a thin plastic sheet. Quarterly J. of Mechanics and Applied Mathematics, 1(1): 103–124. Thomson, W. T. (1955). An approximate theory of armor penetration. J. of Applied Physics, 26(1): 80–82. Sodha, M.S., Jain, V.K. (1958). On physics of armor penetration. J. of Applied Physics, 29(12): 1769–1770. Nixdorff, K. (1987). On the efficiency of different head shapes to perforate thin targets. Transactions of the Canadian Society for Mechanical Engineering, 11(2): 109–112. Gupta, N.K., Ansari, R., Gupta, S.K. (2001). Normal impact of ogive nosed projectiles on thin plates. Int. J. of Impact Engineering, 25(7): 641–660. Calder, C.A., Goldsmith, W. (1971). Plastic deformation and perforation of thin plates resulting from projectile impact. Int. J. of Solids and Structures, 7(7): 863–881. Levy, N., Goldsmith, W. (1984). Normal impact and perforation of thin plates by hemispherically tipped projectiles — 1. Int. J. of Impact Engnineerng, 2(3): 209–229. Zhang, T.G., Mu, J.C. (2000). Discing around perforations of thin plates and tubes by hemisphericalnosed missiles or spheres. Key Engineering Materials, 177-180: 75–80. Pol, M.H., Bidi, A., Hoseini, A.V., Liaghat, G.H. (2009). Analysis of normal penetration of ogive-nose projectiles into thin metallic plates. World Academy of Science, Engineering and Technology, 38: 239–242. Zaid, M., Paul, B. (1957). Mechanics of high speed projectile perforation. J. of the Franklin Institute, 264(2): 117–126. Paul, B., Zaid, M. (1958). Normal perforation of a thin plate by truncated projectiles. J. of the Franklin Institute, 265(4): 317–335. Brown, A. (1964). A quasi-dynamic theory of containment. Int. J. of Mechanical Science, 6(4): 257–262. Woodward, R.L. (1978). The penetration of metal targets by conical projectiles. Int. J. of Mechanical Science, 20(6): 349–359. Woodward, R.L. (1978). The penetration of metal targets which fail by adiabatic shear plugging. Int. J. of Mechanical Science, 20(9): 599–607. Forrestal, M.J., Rosenberg, Z., Luk, V.K., Bless, S.J. (1987). Perforation of aluminum plates with conical nosed rods. J. of Applied Mechanics, 54(1): 230–232. Rosenberg, Z., Forrestal, M.J. (1988). Perforation of aluminum plates with conical nosed rods additional data and discussion. J. of Applied Mechanics, 55(1): 236–238. Landkof, B., Goldsmith, W. (1993). Petalling of thin, metallic plates during penetration by cylindroconical projectiles. Int. J. of Solids and Structures, 21(3): 245–266. Wierzbicki, T. (1999). Petalling of plates under explosive and impact loading. Int. J. of Impact Engineering, 22(9–10): 935–954. Masri, R. (2010). Estimation of deep penetration resistance with spherical specific cavitation energy. Int. J. of Protective Structures, 1(3): 391–408. Durban, D., Fleck, N.A. (1992). Singular plastic fields in steady penetration of a rigid cone. J. of Applied Mechanics, 59(4): 706–710. Srivathsa, B., Ramakrishnan, N. (1997). On the ballistic performance of metallic materials. Bulletin of Material Science, 20(1): 111–123. Srivathsa, B., Ramakrishnan, N. (1998). A ballistic performance index for thick metallic armour. Computer Simulation Modelling in Engineering, 3(1): 33–39. Srivathsa, B., Ramakrishnan, N. (1999). Ballistic performance maps for thick metallic armour. J. of Materials Processing Technology, 96(1–3): 81–91. Giere, A.C. (1964). Some energy and momentum considerations in the perforation of plates. AIAA J., 2(8): 1471–1472. Chen, X.W., Li, Q.M. (2003). Perforation of a thick plate by rigid projectiles, Int. J. of Impact Engineering, 28(7): 743–759. Chen, X.W., Li, Q.M. (2011). Comparative analysis of perforation models of metallic plates by rigid sharp-nosed projectiles. Int. J. of Impact Engineering, 38(7): 613–621. Forrestal, M.J., Warren, T.L. (2009). Perforation equations for conical and ogival nose rigid projectiles into aluminum target plates. Int. J. of Impact Engineering, 36(2): 220–225. Forrestal, M.J., Børvik, T., Warren, T.L. (2010). Perforation of 7075-T651 aluminum armor plates with 7.62 mm APM2 bullets. Experimental Mechanics, 50(8): 1245–1251. Børvik, T., Forrestal, M.J., Warren, T.L. (2010). Perforation of 5083-H116 aluminum armor plates with ogive-nose rods and 7.62 mm APM2 bullets. Experimental Mechanics, 50(7): 969–978. Chen, X.W., Li, Q.M. (2002). Deep penetration of a non deformable projectile with different geometrical characteristics. Int. J. of Impact Engineering, 27(6): 619–637. Awerbuch, J. (1970). A mechanical approach to projectile penetration. Israel J. of Technology, 8(4): 375–383. Awerbuch, J., Bodner, S.R. (1974). Analysis of the mechanics of perforation of projectiles in metallic plates. Int. J. of Solids and Structures, 10(6): 671–684. Chen, X.W., Li, Q.M. (2003). Shear plugging and perforation of ductile circular plates struck by a blunt projectile. Int. J. of Impact Engineering, 28(5): 513–536. Goldsmith, W., Finnegan, S.A. (1971). Penetration and perforation processes in metal targets at and above ballistic velocities. Int. J. of Mechanical Science, 13(10): 843–866. Hsueh, D.-W. (1988). Normal perforation of a thin infinite plate by a flat-headed cylindrical projectile. Applied Mathematics and Mechanics, 9(12): 1113–1119. Hsueh, D.-W. (1989). Normal perforation of a thin infinite plate by a flat-headed cylindrical projectile. Int. J. of Impact Engineering, 8(2): 133–139. Jenq, S.T., Goldsmith, W.,. Kelly, J.M. (1988). Effect of target bending in normal impact of a flat-ended cylindrical projectile near the ballistic limit. Int. J. of Solids and Structures, 24(12): 1243–1266. Krishna Teja Palleti, H.N., Gurusamy, S., Kumar, S., Soni, R., John, B., Vaidya, R., Bhoge, A., Naik, N.K. (2012). Ballistic impact performance of metallic targets. Materials and Design, 39: 253–263. Liss, J., Goldsmith, W., Kelly, J.M. (1983). A phenomenological penetration model of plates. Int. J. of Impact Engineering, 1(4): 321–341. Ning, J., Song, W., Wang, J. (2005). Study of the perforation of stiffened plates by rigid projectiles. Acta Mechanica Sinica. 21(6): 582–591. Shoukry, M., Nair, S., Kalpakjian, S. (1991). Effect of shear deformation on the dynamic plastic bending of metallic plates during normal penetration. Int. J. of Engineering Science, 29(9): 1035–1052. Ravid, M., Bodner, S.R. (1983). Dynamic perforation of viscoplastic plates by rigid projectiles. Int. J. of Engineering Science, 21(6): 577–591. Ravid, M., Bodner, S.R. (1994). Penetration into thick targets — refinement of a 2D dynamic plasticy approach. Int. J. of Impact Engineering, 15(4): 491–499. Teng, X., Wierzbicki, T. (2005). Dynamic shear plugging of beams and plates with an advancing crack. Int. J. of Impact Engineering, 31(6): 667–698. Wu, Y., Batra, R.C. (1996). An engineering penetration/perforation model of hemispherical nosed rigid cylindrical rods into strain-hardening targets. Computers and Structures, 58(1): 51–58. Holt, W.H., Mock, W., Jr., Soper, W.G., Coffey, C.S., Ramachandran, V., Armstrong, R.W. (1993). Reverse ballistic impact study of shear plug formation and displacement in Ti6Al4V alloy. J. of Applied Physics, 73(8): 3753–3759. Sagomonyan, A.Ya. (1977). On problem of barrier perforation by cylinder. Vestnik Moskovskogo Universiteta. Matematika Mekhanika, 5: 111–118 (in Russian) Sagomonyan, A.Ya., Gendugov, V.M., Sagomonyan, E.A. (1982). On the problem of perforation of a barrier. Moscow University Mechanics Bulletin, 37(1–2): 14–18. Ben-Dor, G., Dubinsky, A., Elperin, T. (2000). Optimization of the shape of a penetrator taking into account plug formation. Int. J. of Fracture, 106(3): L29–L34. Ben-Dor, G., Dubinsky, A., Elperin, T. (2007). Shape optimization of impactors against a finite width shield using a modified method of local variations. Mechanics Based Design of Structures and Machines, 35(2): 113–125. Sagomonyan, A.Ya. (1974). Penetration: Penetration of Solids into Compressible Continuous Media. Moscow State University Press, Moscow (in Russian). Nishiwaki, J. (1951). Resistance to the penetration of a bullet through an aluminium plate. J. of Physics Society of Japan, 6(5): 374–378. Vitman, F.F., Stepanov, V.A. (1959). Effect of strain rate on resistance of metals to deformation at impact velocities of 100-1000 m/s. In: Nekotoryje Problemy Prochnosti Tvjordogo Tela. USSR Academy of Science, Moscow-Leningrad, pp. 207–221 (in Russian). [English translation: Vitman, F.F., Stepanov, V.A. Influence of Strain Rate on Resistance to Deformation of Metals at Impact Velocities of 100 to 1000 m/sec. Foreign Technology Division Wright-Patterson AFB, Ohio, 1964 (AD0605234)]. Hayes, W.D., Probstein, R.F. (1959). Hypersonic Flow Theory. Academic Press. New York & London. Vitman, F.F., Ioffe, B.S. (1948). A simple method of determining dynamic hardness of metals using a double cone. Zavodskaja Laboratorija 14(6): 727–732 (in Russian). Chernyi, G.G. (1969). Introduction to Hypersonic Flow. Academic Press, New York. Golubev, V.K., Medvedkin, V.A. (2000). Penetration of a rigid shell into a steel obstacle at moderate impact velocities. J. of Applied Mechanics and Technical Physics, 41(1): 32–34. Golubev, V.K., Medvedkin, V.A. (2001). Penetration of a rigid rod into a thick steel plate at elevated velocities. Strength of Materials, 33(4): 400–405. Landgrov, I.F., Sarkisyan, O.A. (1984). Piercing plastic material barriers with a rigid punch. J. of Applied Mechanics and Technical Physics, 25(5): 771–773. Yarin, A.L., Rubin, M.B., Roisman, I.V. (1995). Penetration of a rigid projectile into an elastic-plastic target of finite thickness. Int. J. of Impact Engineering, 16(5/6): 801–831. Wen, H.M. (2002). Predicting the penetration and perforation of targets struck by projectiles at normal incidence. Mechanics of Structures and Machines, 30(4): 543–577. Wen, H.M. (2002). Penetration and perforation of thick metallic targets under impact by missiles. Chinese J. of High Pressure Physics, 16(2): 94–104 (in Chinese). Shaw, A. (2012). Penetration of rigid objects into semi-infinite compressible solids. Mechanics of Materials, 50: 22–35. Bagdoev, A.G., Vantsyan, A.A., Khachatryan, B.K., Khachatryan, L.A. (1997). Investigation of dynamic problem of penetration of rigid indentor into anisotropic medium on the basis of hypothesis of normal cross sections. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 50(1): 44–52 (in Russian). Partom, Y. (1996). Static cavity expansion model for partially confined targets. Report IAT.R 0092. The University of Texas at Austin, Institute for Advanced Technology, Austin, TX. Littlefield, D.L., Anderson, C.E., Jr., Partom, Y., Bless, S.J. (1997). The penetration of steel targets finite in radial extent. Int. J. of Impact Engineering, 19(1): 49–62. Vantsyan, A.A. (1981). Determining depth of penetration of slender body into metals. Doklady Akademii Nauk Armjanskoj SSR, 72(2): 95–101 (in Russian). Bagdoev, A.G., Vantsyan, A.A. (1981). Penetration of slender bodies into elastic media. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 34(1): 3–14 (in Russian). Bagdoev, A.G., Vantsyan, A.A. (1981). Penetration of slender body into metals and soils. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 34(3): 25–38 (in Russian). Rahmatulin, K.A., Bagdoev, A.G. (1982). The penetration of thin rigid body in initially elastic media. Int. J. of Engineering Science, 20(1): 101–111. Bagdoev, A.G., Vantsyan, A.A. (1983). Penetration of slender body into elastic anisotropic media. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 36(6): 23–30 (in Russian). Bagdoev, A.G., Vantsyan, A.A. (1987). Investigation of penetration of slender rigid body into transversely isotropic medium. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 40(4): 3–6 (in Russian). Bagdoev, A.G., Vantsyan, A.A., Grigoryan, M.S. (1988). Influence of anisotropic properties of metal laminated specimen on penetration. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 41(6): 28–34 (in Russian). Bagdoev, A.G., Vantsyan, A.A., Grigoryan, M.S. (1989). Investigation of singularity of stresses in anisotropic plastic medium for cone penetration. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 42(4): 52–57 (in Russian). Asatryan, V.L., Bagdoev, A.G., Vantsyan, A.A. (1996). Solution of a dynamic problem of penetration of rigid cone into initially elastic transversely isotropic medium. Izvestija Akademii Nauk Armjanskoj SSR. Mekhanika. 49(4): 77–85 (in Russian). Bagdoev, A.G., Vantsyan, A.A. (1989). Penetration of a thin body into a transversely isotropic medium with twisting. Mechanics of solids, 24(2): 182–184. Huang, G.-Y., Wu, G., Feng, S.-S., Zhou, T. (2011). Theory and experiment study of normal penetration of slender nose projectile into steel target. Applied Mechanics and Materials, 80-81: 137–142. Huang, G.-Y., Feng, S.-S., Guang, W., Li, S.-P. (2011). Performance of different projectile nose shapes in normal penetrating armor targets. Advanced Materials Research, 308–310: 1420–1425. Dienes, J.K., Miles, J.W. (1977). A membrane model for the response of thin plates to ballistic impact. J. of the Mechanics and Physics of Solids, 25(4): 237–256. Tirosh, J., Tylis, A., Davidi, G. (2009). Foreign object damage: Penetration of rigid projectiles into solids. Mechanics of Materials, 41(5): 535–544. Teland, J.A., Moxnes, J.F. (2003). Analytical cavity expansion penetration models compared with numerical simulations. Report FFI/RAPPORT 2003/00934. Norwegian Defence Research Establishment (FFI), Kjeller, Norway. Wijk, G., Hartmann, M., Tyrberg, A. (2005). A model for rigid projectile penetration and perforation of hard steel and metallic targets. Report FOIR-1617-SE. Swedish Defence Reasearch Agency (FOI), Tumba, Sweden. Wijk, G. (2005). Initially increasing penetration resistance. Friction and target size effects in connection with rigid projectile penetration and perforation of steel and metallic targets. Report FOI-R-1631-SE. Swedish Defence Reasearch Agency (FOI), Tumba, Sweden.