Analysis of $$\hbox {CO}_2$$ reduction potentials and component load collectives of 48 V-hybrids under real-driving conditions

Alnamasi, K., Terry, S., La Rocca, A., Cairns, A.: Brake power availability LED optimisation of P0 versus P2 48V hybrid powertrain architectures. In: SAE Technical Paper Series, SAE Technical Paper Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States (2020)

André, M.: The ARTEMIS European driving cycles for measuring car pollutant emissions. Sci. Total Environ. 334–335, 73–84 (2004)

Ardey, N.: Future technology mix for emission-free mobility. In: 27th Aachen Colloquium Automobile and Engine Technology 2018 (2018)

Balazs, A., Nijs, M., Pischinger, S. Optimierte Auslegung von Hybridantriebssträngen unter Realen Fahrbedingungen. ATZ Automobiltech Z 114, 534–541 (2012)

Bao, R., Avila, V., Baxter, J.: Effect of 48 V mild hybrid system layout on powertrain system efficiency and its potential of fuel economy improvement. SAE Technical Paper 2017-01-1175 (2017)

Blumenröder, K., Bennewitz, K., Zillmer, M., Mann, A., Voeltz, T.: Das 48V-Mild-Hybrid-Antriebsstrangsystem des Volkswagen Golf 8: Auslegung und Steuerung, vol. 40. Internationales Motorensymposium 2019 (2019)

Bongards, A., Mohon, S., Semenov, D., Wenzel, W.: Comparing 48V mild hybrid concepts using a hybrid-simulation-toolkit. In: Bargende, M., Reuss, H.C., Wagner, A., Wiedemann, J. (eds.) 19. Internationales Stuttgarter Symposium, Proceedings, vol. 74, pp. 1085–1100. Springer, Fachmedien, Wiesbaden (2019)

Bünder, C.: A scalable approach for future vehicle electrification. In: Bargende, M., Reuss, H.C., Wagner, A., Wiedemann, J. (eds.) 19. Internationales Stuttgarter Symposium, Proceedings, p. 319. Springer, Fachmedien, Wiesbaden (2019)

Bütterling, P., Benders, B., Eckstein, L.: Effiziente 48-V-Antriebs-und Bordnetzarchitekturen. MTZ Motortechnische Z. 77(9), 48–53 (2016)

de Cesare, M., Cavina, N., Brugnoni, E.: Conceptual design and analytic assessment of 48V electric hybrid powertrain architectures for passenger cars. In: SAE Technical Paper Series, SAE Technical Paper Series. SAE International400 Commonwealth Drive, Warrendale, PA, United States (2019)

Eisele, A., Horlbeck, L., Hann, M., Jäger, B., Lienkamp, M.: Real-life data based analysis of driving cycles regarding their insufficient cycle duration. In: 2016 IEEE 19th International Conference on Intelligent Transportation Systems (ITSC), Rio de Janeiro, Brazil, pp. 408–415 (2016)

Fathy, H.K., Reyer, J.A., Papalambros, P.Y., Ulsov, A.G.: On the coupling between the plant and controller optimization problems. In: Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148), Arlington, VA, USA, vol. 3, pp. 1864–1869 (2001)

Förster, D., Inderka, R.B., Gauterin, F.: Data-driven identification of characteristic real-driving cycles based on k-means clustering and mixed-integer optimization. IEEE Trans. Veh. Technol. 69(3), 2398–2410 (2020)

Förster, D., Timmann, M., Inderka, R., Strenkert, J.: Impacts of Future 48 V-Systems on Powertrain Operation under Real-Driving Conditions. In: Bargende, M., Reuss, H.C., Wagner, A., Wiedemann, J. (eds.) 20. Internationales Stuttgarter Symposium, Proceedings. Springer, Fachmedien, Wiesbaden (2020)

Fritz, M., Hillenbrand, T., Pfund, T.: 48-V-Technologien im Fahrzeug. ATZextra 22(S1), 28–33 (2017)

Huang, Y., Wang, H., Khajepour, A., Li, B., Ji, J., Zhao, K., Hu, C.: A review of power management strategies and component sizing methods for hybrid vehicles. Renew. Sustain. Energy Rev. 96, 132–144 (2018)

Kirchner, E., Kufner, A., Sattler, M.: Electric Axle for 48-V electrical hybrid systems. MTZ Worldw. 76(5), 10–15 (2015)

Lee, S., Cherry, J., Safoutin, M., McDonald, J., Olechiw, M.: Modeling and validation of 48 V mild hybrid lithium-ion battery pack. SAE Int. J. Alt. Power. 7(3), 273–287 (2018)

Melaika, M., Mamikoglu, S., Dahlander, P.: 48V Mild-Hybrid Architecture Types, Fuels and Power Levels Needed to Achieve 75g CO2/km, SAE Technical Paper 2019-01-0366 (2019)

Onori, S., Serrao, L.: On adaptive-ECMS strategies for hybrid electric vehicles. Proc. of the International Scientific Conference on Hybrid and Electric Vehicles, pp. 1–7 (2011)

Paganelli, G., Delprat, S., Guerra, T.M., Rimaux, J., Santin, J.J.: Equivalent consumption minimization strategy for parallel hybrid powertrains. In: Vehicular Technology Conference. IEEE 55th Vehicular Technology Conference. VTC Spring 2002 (Cat. No.02CH37367), Birmingham, AL, USA, vol. 4, pp. 2076–2081 (2002)

Rezaei, A., Burl, J.B., Zhou, B.: Estimation of the ECMS equivalent factor bounds for hybrid electric vehicles. IEEE Trans. Control Syst. Technol. 26(6), 2198–2205 (2018)

Rong, R., Wang, R..: High efficiency 1.5kW 48V-12V DCDC converter with leadless MOSFET for mild hybrid electric vehicle. In: PCIM Asia 2018: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (2018)

Schneider, J.: 48V Boost Recuperation Systems - Golden Gate into the Future, SAE Technical Paper 2019-01-0391 (2019)

Schöffmann, W., Sorger, H., Weissbäck, M., Pels, T., Kaup, C., Brunner, M.: The tailored powertrain for 48 V—options for the gasoline engine—chance for future Diesel engines. In: Liebl, J., Beidl, C. (eds.) Internationaler Motorenkongress 2017, Proceedings, pp. 261–296. Springer, Fachmedien, Wiesbaden (2017)

SEBoK Editorial Board (ed.): Guide to the System Engineering Body of Knowledge (SEBoK): version 1.9.1. BKCASE Editorial Board, Hoboken (2018)

Sellers, R., Revereault, P., Stalfors, T., Stenfeldt, M.: Optimising the architecture of a 48V mild-hybrid diesel powertrain. In: 26th Aachen Colloquium Automobile and Engine Technology 2017 (2017)

Silvas, E., Hofman, T., Murgovski, N., Etman, P., Steinbuch, M.: Review of Optimization Strategies for System-Level Design in Hybrid Electric Vehicles. IEEE Trans. Veh. Technol. 66(1), 57–70 (2016)

Skoog, S.: Experimental and model based evaluation of mild hybrid fuel consumption gains and electric machine utilization for personal vehicle application: 7-10 Aug. 2017. In: 2017 IEEE Transportation Electrification Conference and Expo (2017)

Tietge, U., Díaz, S., Mock, P., German, J., Bandivadekar, A., Ligterink, N.: From laboratory to road: a 2016 update of official and real-world fuel consumption and CO2 values for passenger cars in europe. ICCT/TNO White Paper (2016)

Timmann, M., Inderka, R., Eder, T.: Development of 48V powertrain systems at Mercedes-Benz. In: Bargende, M., Reuss, H.C., Wiedemann, J. (eds.) 18. Internationales Stuttgarter Symposium, Proceedings, pp. 567–577. Springer, Fachmedien, Wiesbaden (2018)

Tschöke, H., Gutzmer, P., Pfund, T.: Elektrifizierung des Antriebsstrangs. Springer, erlin, Heidelberg (2019)

Voegler, M., Koenigsstein, A., Fuhrmann, N., Beidl, C., Thiem, M.: Combustion engines for electrified powertrains—systems engineering between efficiency, emission and cost. In: 27th Aachen Colloquium Automobile and Engine Technology 2018 (2018)

Weiß, F.: Optimale Konzeptauslegung elektrifizierter Fahrzeugantriebsstränge. Ph.D. thesis, Technische Universität Chemnitz (2017)

Werner, Q.: Model-based optimization of electrical system in the early development stage of hybrid drivetrains. Ph.D. thesis, Universite de Lorraine (2017)

Werra, M., Küçükay, F.: CO2-analysis and dimensioning of 48V hybrid drivetrains in legal and customer based cycles. In: 28th Aachen Colloquium Automobile and Engine Technology 2019, pp. 1431–1448 (2019)

Xu, N., Kong, Y., Chu, L., Ju, H., Yang, Z., Xu, Z., Xu, Z.: Towards a smarter energy management system for hybrid vehicles: a comprehensive review of control strategies. Appl. Sci. 9(10), 2026 (2019)