Analysis of blade's chord length with NACA0015 profile for enhanced wave energy conversion of Wells turbine

Vietnam Journal of Mechanics - Trang - 2025
Kha Tuan Tran Huynh1, Khoa Anh Vo1, Vay Siu Lo1, Thien Tich Truong1
1\(^1\) Department of Engineering Mechanics, Faculty of Applied Sciences, Ho Chi Minh City University of Technology (HCMUT), 268 Ly Thuong Kiet Street, District 10, Ho Chi Minh City, Vietnam<br> \(^2\) Vietnam National University Ho Chi Minh City, Linh Trung Ward, Thu Duc City, Ho Chi Minh City, Vietnam

Tóm tắt

This paper investigates the enhancement of Wells turbine blades by modifying the chord length design parameter. The Wells turbine, a promising device in wave energy conversion systems, faces a limited operating range due to flow separation, which restricts its efficiency at higher flow rates. Enhancing the performance of the Wells turbine is crucial for effective wave energy exploitation. The computational simulations in this study are conducted using ANSYS Fluent. Turbine performance is evaluated based on non-dimensional torque, pressure torque, and efficiency, derived from solving the steady 3D incompressible Reynolds Averaged Navier–Stokes equations. The results are validated against reliable references, showing good agreement. The numerical findings reveal that altering the turbine chord length significantly impacts efficiency. Optimizing the chord length enhances the Wells turbine's performance in wave energy conversion, making it a more viable option for renewable energy power generation.

Từ khóa

#wave energy conversion #Wells turbine #chord length #ANSYS fluent

Tài liệu tham khảo

<p>[1] The Department of Business, Economic Development, and Tourism (DBEDT). <em>Feasibility of developing wave power as renewable energy resource for Hawaii</em>, (2002).</p>

<p>[2] M. Amundarain, M. Alberdi, A. J. Garrido, I. Garrido, and J. Maseda. Wave energy plants: Control strategies for avoiding the stalling behaviour in the Wells turbine. <em>Renewable Energy</em>, <strong>35</strong>, (2010), pp. 2639–2648. <a href="https://doi.org/10.1016/j.renene.2010.04.009">https://doi.org/10.1016/j.renene.2010.04.009</a>.</p>

<p>[3] M. Torresi, S. M. Camporeale, P. D. Strippoli, and G. Pascazio. Accurate numerical simulation of a high solidity Wells turbine. <em>Renewable Energy</em>, <strong>33</strong>, (2008), pp. 735–747. <a href="https://doi.org/10.1016/j.renene.2007.04.006">https://doi.org/10.1016/j.renene.2007.04.006</a>.</p>

<p>[4] A. Clément, P. McCullen, A. Falcão, A. Fiorentino, F. Gardner, K. Hammarlund, G. Lemonis, T. Lewis, K. Nielsen, S. Petroncini, M.-T. Pontes, P. Schild, B.-O. Sjo¨ stro¨ m, H. C. Sørensen, and T. Thorpe. Wave energy in Europe: current status and perspectives. <em>Renewable and Sustainable Energy Reviews</em>, <strong>6</strong>, (2002), pp. 405–431. <a href="https://doi.org/10.1016/s1364-0321(02)00009-6">https://doi.org/10.1016/s1364-0321(02)00009-6</a>.</p>

<p>[5] M. Paderi and P. Puddu. Experimental investigation in a Wells turbine under bi-directional flow. <em>Renewable Energy</em>, <strong>57</strong>, (2013), pp. 570–576. <a href="https://doi.org/10.1016/j.renene.2013.02.016">https://doi.org/10.1016/j.renene.2013.02.016</a>.</p>

<p>[6] A. F. O. Falcão and J. C. C. Henriques. Oscillating-water-column wave energy converters and air turbines: A review. <em>Renewable Energy</em>, <strong>85</strong>, (2016), pp. 1391–1424. <a href="https://doi.org/10.1016/j.renene.2015.07.086">https://doi.org/10.1016/j.renene.2015.07.086</a>.</p>

<p>[7] R. Curran and L. M. C. Gato. The energy conversion performance of several types of Wells turbine designs. <em>Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy</em>, <strong>211</strong>, (1997), pp. 133–145. <a href="https://doi.org/10.1243/0957650971537051">https://doi.org/10.1243/0957650971537051</a>.</p>

<p>[8] A. S. Shehata, Q. Xiao, K. M. Saqr, and D. Alexander. Wells turbine for wave energy conversion: a review. <em>International Journal of Energy Research</em>, <strong>41</strong>, (2016), pp. 6–38. <a href="https://doi.org/10.1002/er.3583">https://doi.org/10.1002/er.3583</a>.</p>

<p>[9] T. H. Kim, T. Setoguchi, K. Kaneko, and S. Raghunathan. Numerical investigation on the effect of blade sweep on the performance of Wells turbine. <em>Renewable Energy</em>, <strong>25</strong>, (2002), pp. 235–248. <a href="https://doi.org/10.1016/s0960-1481(00)00210-x">https://doi.org/10.1016/s0960-1481(00)00210-x</a>.</p>

<p>[10] M. Takao, T. Setoguchi, Y. Kinoue, and K. Kaneko. Wells turbine with end plates for wave energy conversion. <em>Ocean Engineering</em>, <strong>34</strong>, (2007), pp. 1790–1795. <a href="https://doi.org/10.1016/j.oceaneng.2006.10.009">https://doi.org/10.1016/j.oceaneng.2006.10.009</a>.</p>

<p>[11] J. K. Watterson and S. Raghunathan. Computed effects of solidity on Wells turbine performance. <em>JSME International Journal Series B</em>, <strong>41</strong>, (1), (1998), pp. 177–183. <a href="https://doi.org/10.1299/jsmeb.41.177">https://doi.org/10.1299/jsmeb.41.177</a>.</p>

<p>[12] P. Halder, A. Samad, J.-H. Kim, and Y.-S. Choi. High performance ocean energy harvesting turbine design–A new casing treatment scheme. <em>Energy</em>, <strong>86</strong>, (2015), pp. 219–231. <a href="https://doi.org/10.1016/j.energy.2015.03.131">https://doi.org/10.1016/j.energy.2015.03.131</a>.</p>

<p>[13] T. Kim, T. Setoguchi, Y. Kinoue, and K. Kaneko. Effects of blade geometry on performance of wells turbine for wave power conversion. <em>Journal of Thermal Science</em>, <strong>10</strong>, (2001), pp. 293–300. <a href="https://doi.org/10.1007/s11630-001-0035-4">https://doi.org/10.1007/s11630-001-0035-4</a>.</p>

<p>[14] E. N. Jacobs and A. Sherman. <em>Airfoil section characteristics as affected by variation of the Reynolds number</em>. NACA Report No. 586, (1937).</p>

<p>[15] R. E. Sheldahl and P. C. Klimas. <em>Aerodynamic</em><em> characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines</em>. Sandia National Laboratories energy report, (1981). <a href="https://doi.org/10.2172/6548367">https://doi.org/10.2172/6548367</a>.</p>

<p>[16] S. Raghunathan, C. P. Tan, and N. A. J. Wells. Wind tunnel tests on airfoils in tandem cascade. <em>AIAA Journal</em>, <strong>19</strong>, (1981), pp. 1490–1492. <a href="https://doi.org/10.2514/3.60084">https://doi.org/10.2514/3.60084</a>.</p>

<p>[17] W. P. Wolfe and S. S. Ochs. <em>Predicting aerodynamic characteristic of typical wind turbine airfoils using CFD</em>. (1997). <a href="https://doi.org/10.2172/534484">https://doi.org/10.2172/534484</a>.</p>

<p>[18] A. Gareev, B. Kosasih, and P. Cooper. Analysis of interference factors of air turbine cascades. <em>Engineering Applications of Computational Fluid Mechanics</em>, <strong>7</strong>, (2013), pp. 496–506. <a href="https://doi.org/10.1080/19942060.2013.11015488">https://doi.org/10.1080/19942060.2013.11015488</a>.</p>

<p>[19] N. Scholz. <em>Aerodynamics of cascades</em>. AGARD-AG-220. NATO Science and Technology Organization: Amsterdam.</p>

<p>[20] S. Shaaban and A. Abdel Hafiz. Effect of duct geometry on Wells turbine performance. <em>Energy</em> <em>Conversion and Management</em>, <strong>61</strong>, (2012), pp. 51–58. <a href="https://doi.org/10.1016/j.enconman.2012.03.023">https://doi.org/10.1016/j.enconman.2012.03.023</a>.</p>

<p>[21] P. Halder and A. Samad. Casing treatment of a wave energy extracting turbine. <em>Aquatic Procedia</em>, <strong>4</strong>, (2015), pp. 516–521. <a href="https://doi.org/10.1016/j.aqpro.2015.02.067">https://doi.org/10.1016/j.aqpro.2015.02.067</a>.</p>

<p>[22] S. Raghunathan. The wells air turbine for wave energy conversion. <em>Progress</em> <em>in Aerospace Sciences</em>, <strong>31</strong>, (1995), pp. 335–386. <a href="https://doi.org/10.1016/0376-0421(95)00001-f">https://doi.org/10.1016/0376-0421(95)00001-f</a>.</p>

<p>[23] M. H. Mohamed. Aerodynamic performance of the Wells turbine used in the sea wave conversion. Master’s thesis, Helwan University, Cairo, Egypt, (2003).</p>

<p>[24] M. H. A. Mohamed. <em>Design optimization of Savonius and Wells turbines</em>. PhD thesis, Magdeburg, Germany, (2011).</p>

<p>[25] F. R. Menter. Two-equation eddy-viscosity turbulence models for engineering applications. <em>AIAA Journal</em>, <strong>32</strong>, (1994), pp. 1598–1605. <a href="https://doi.org/10.2514/3.12149">https://doi.org/10.2514/3.12149</a>.</p>

Thông tin
Thông tin xuất bản

Vietnam Journal of Mechanics

Thông tin tác giả