An augmented Kalman filter for force identification in structural dynamics

Mechanical Systems and Signal Processing - Tập 27 - Trang 446-460 - 2012
E. Lourens1, E. Reynders1, G. De Roeck1, G. Degrande1, G. Lombaert1
1Department of Civil Engineering, K.U. Leuven, Kasteelpark Arenberg 40, B-3001 Leuven, Belgium

Tài liệu tham khảo

Fabunmi, 1986, Effects of structural modes on vibratory force determination by the pseudoinverse technique, AIAA J., 24, 504, 10.2514/3.9297

B. Hillary, D.J. Ewins, The use of strain gauges in force determination and frequency response function measurements, in: Proceedings of IMAC II International Modal Analysis Conference, Orlando, 1984, pp. 627–634.

Parloo, 2003, Force identification by means of in-operational modal models, J. Sound Vib., 262, 161, 10.1016/S0022-460X(02)01052-0

K.K. Stevens, Force identification problems: an overview, in: Proceedings of SEM Spring Meeting, Houston, Texas, 1987, pp. 838–844.

Vanlanduit, 2005, On-line identification of operational loads using exogenous inputs, J. Sound Vib., 285, 267, 10.1016/j.jsv.2004.08.028

Klinkov, 2007, An updated comparison of the force reconstruction methods, Key Eng. Mater., 347, 461, 10.4028/www.scientific.net/KEM.347.461

L.J.L. Nordström, T.P. Nordberg, A critical comparison of time domain load identification methods, in: Proceedings of the Sixth International Conference on Motion and Vibration Control, Saitama, Japan, 2002, pp. 1151–1156.

Ma, 1998, A study of an inverse method for the estimation of impulsive loads, Int. J. Syst. Sci., 29, 663, 10.1080/00207729808929559

Tuan, 1996, An input estimation approach to on-line two dimensional inverse heat conduction problems, Numer. Heat Transfer, 29, 345, 10.1080/10407799608914986

Liu, 2000, Input force estimation of a cantilever plate by using a system identification technique, Comput. Methods Appl. Mech. Eng., 190, 1309, 10.1016/S0045-7825(99)00465-X

Ma, 2000, Input forces estimation of a cantilever beam, Inverse Probl., 8, 511, 10.1080/174159700088027745

Loh, 2008, Input force identification using Kalman filter techniques: application to soil-pile interaction, vol. 693223, 1

Ma, 2003, Adaptive weighting inverse method for the estimation of input loads, Int. J. Syst. Sci., 34, 181, 10.1080/0020772031000135432

Ma, 2004, An inverse method for the estimation of input forces acting on non-linear structural systems, J. Sound Vib., 275, 953, 10.1016/S0022-460X(03)00797-1

Hwang, 2009, Estimation of modal loads using structural response, J. Sound Vib., 326, 522, 10.1016/j.jsv.2009.05.003

M. Klinkov, C.-P. Fritzen, Online estimation of external loads from dynamic measurements, in: P. Sas, M. De Munck (Eds.), Proceedings ISMA2006, Leuven, Belgium, September 2006, pp. 3957–3968.

Nordström, 2006, A dynamic programming algorithm for input estimation on linear time-variant systems, Comput. Methods Appl. Mech. Eng., 195, 6407, 10.1016/j.cma.2006.01.002

Trujillo, 1997

Kalman, 1960, A new approach to linear filtering and prediction problems, J. Basic Eng. Trans. ASME, 82D, 35, 10.1115/1.3662552

E. Lourens, E. Reynders, G. Lombaert, G. De Roeck, G. Degrande, Dynamic force identification by means of state-augmentation: a combined deterministic-stochastic approach, in: Proceedings of ISMA2010 International Conference on Noise and Vibration Engineering, Leuven, Belgium, September 2010, pp. 2069–2080.

Hansen, 1992, Analysis of discrete ill-posed problems by means of the L-curve, SIAM Rev., 34, 561, 10.1137/1034115

Trujillo, 1978, Application of dynamic programming to the general inverse problem, Int. J. Numer. Methods Eng., 12, 613, 10.1002/nme.1620120406

Adams, 2002, Multiple force identification for complex structures, Exp. Mech., 42, 25, 10.1007/BF02411048

Busby, 1987, Solution of an inverse dynamics problem using an eigenvalue reduction technique, Comput. Struct., 25, 109, 10.1016/0045-7949(87)90222-7

Law, 2001, Moving force identification: optimal state estimation approach, J. Sound Vib., 239, 233, 10.1006/jsvi.2000.3118

E. Lourens, G. Lombaert, G. De Roeck, G. Degrande, Identification of dynamic axle loads from bridge responses by means of an extended dynamic programming algorithm, in: WIM (Weigh-In-Motion), Load Capacity and Bridge Performance, Taormina, Italy, September 2008, pp. 59–69.

Reynders, 2008, Reference-based combined deterministic-stochastic subspace identification for experimental and operational modal analysis, Mech. Syst. Signal Process., 22, 617, 10.1016/j.ymssp.2007.09.004

W. Heylen, S. Lammens, P. Sas, Modal Analysis Theory and Testing, Department of Mechanical Engineering, Katholieke Universiteit Leuven, Leuven, Belgium, 1997.

Nordström, 2004, A time delay method to solve non-collocated input estimation problems, Mech. Syst. Signal Process., 18, 1469, 10.1016/j.ymssp.2004.02.006

Mao, 2010, Experimental study of hammer impact identification on a steel cantilever beam, Exp. Tech., 34, 82, 10.1111/j.1747-1567.2009.00530.x

Lu, 2007, Identification of system parameters and input force from output only, Mech. Syst. Signal Process., 21, 2099, 10.1016/j.ymssp.2006.11.004

Thông tin
Thông tin xuất bản

Mechanical Systems and Signal Processing

Tập 27

446-460

Thông tin tác giả