Advanced recycling process for waste plastics based on physical degradation theory and its stability

Report of Special Research from the National Institute for Environmental Studies (2006) Japan, National Institute for Environmental Studies An Introduction to Plastic Recycling in Japan (2016) Plastic Waste Management Institute, p. 5–7 Al-Salem SM et al (2009) Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Manag 29:2625–2643 Nishiya Y (2008) Present state of plastic recycling in Japan. Nippon Gomu Kyokaishi 81(9):388–395 Yamasue E et al (2010) Evaluation of total materials requirement for the recycling of materials (Urban Ore TMR) from end-of-life electric home appliances. J Jpn Inst Metals 74:811–819 Eiichi Takatori T, Shimura T, Adachi S, Yao, Shindou Y (2014) Tensile properties, morphology and rheological properties of a recycled HDPE. J Soc Rheol Jpn 42(1):45–49 White EEB, Winter HH, Rothstein JP (2012) Extensional-flow-induced crystallization of isotactic polypropylene. Rheol Acta 51:303–314 Binsbergen FL, de Lange BGM (1968) Morphology of polypropylene crystallized from the melt. Polymer 9:23–40 Cavallo D et al (2010) Flow memory and stability of shear-induced nucleation precursors in isotactic polypropylene. Macromolecules 43:9394–9400 Doufas AK et al (1999) A continuum model for flow-induced crystallization of polymer melts. J Rheol 43:85–109 Eiichi Takatori T, Shimura S, Yao, Shindou Y (2014) Dependencies of material properties on averaged molecular weight of a recycled high density polyethylene. J Soc Rheol Jpn 42(1):39–43 Hayashi T et al (2009) Precursor of shish-kebab in isotactic polystyrene under shear flow. Polymer 50:2095–2103 Housmans JW et al (2009) Saturation of pointlike nuclei and the transition to oriented structures in flow-induced crystallization of isotactic polypropylene. Macromolecules 42:5728–5740 Matsuba G et al (2007) The effects of ultra-high molecular weight components on crystallization under shear flow. Jpn J Polym Sci Technol 64(7):419–428 Matsuba G et al (2009) Oriented Structure in Isotactic Polystyrene Melt Induced by Shear Flow. Japanese journal of polymer science technology 66:419–427 Ogino Y et al (2006) Crystallization of isotactic polypropylene under shear flow observed in a wide spatial scale. Macromolecules 39:7617–7625 Ogino Y et al (2006) Effects of high molecular weight component on crystallization of polyethylene under shear flow. Polymer 47:5669–5677 Somani RH et al (2006) Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry. J Polym Sci Polym Phys 44:3553–3570 Zuidema H et al (2001) Development and validation of a recoverable strain-based model for flow-induced crystallization of polymers. Macromol Theory Simul 10:447–460 Hsu Y-C et al (2012) A fundamental study on photo-oxidative degradation of linear low density polyethylene films at embrittlement. Polymer 53:2385–2393 Chen HB et al (2002) Fracture toughness α- and β-phase polypropylene homopolymers and random- and block-copolymers. Polymer 43:6505–6514 Tominaga A, Sekiguchi H, Nakano R, Yao S, Takatori E (2015) Thermal process dependence of mechanical properties and inner structure of pre-consumer recycled polypropylene. In: Proceedings of PPS-30, AIP Conf. Proc. 1664, 150011-1-150011-4 Tominaga A, Sekiguchi H, Nakano R, Yao S, Takatori E (2013) Advanced recycling technology of pre-consumer waste polypropylene. Jpn J Polym Sci Technol 70(12):712–721 Tominaga A, Yao S (2016) Novel recycling technology increases the value of discarded plastic container and packaging resins. Convertech e-Print 6(1):52–57 Yao S et al (2013) Inner structure and mechanical properties of recycled polypropylene. J Soc Rheol Jpn 41(3):173–178 Yao S et al (2014) UV degradation properties of a virgin/recycled polymer blend. J Soc Rheol Jpn 42(1):61–64 Amir S et al (2014) The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer 55:3156–3167 Bai H et al (2011) New insight on the annealing induced microstructural changes and their roles in the toughening of β-form polypropylene. Polymer 52:2351–2360 Elmoummi A et al (2003) Correlation of material and processing time scales with structure development in isotactic polypropylene crystallization. Macromolecules 36:6453–6461 Ferrer-Balas D et al (2011) Influence of annealing on the microstructural, tensile and fracture properties of polypropylene films. Polymer 42:1697–1705 Hedesiu C et al (2007) The effect of temperature and annealing on the phase composition, molecular mobility and the thickness of domains in high-density polyethylene. Polymer 48:763–777 Maxwell AS et al (1996) The effect of high pressure annealing on the molecular network in polyethylene. Polymer 37(15):3293–3301