AMB2018-03: Benchmark Physical Property Measurements for Material Extrusion Additive Manufacturing of Polycarbonate
Tóm tắt
Từ khóa
Tài liệu tham khảo
Goh GD, Yap YL, Tan HKJ, Sing SL, Goh GL, Yeong WY (2020) Process-structure-properties in polymer additive manufacturing via material extrusion: a review. Crit Rev Solid State Mater Sci 45(2):113–133
Huang Y, Leu MC, Mazumder J, Donmez A (2015) Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J Manuf Sci E T ASME 137(1):10
Tofail SAM, Koumoulos EP, Bandyopadhyay A, Bose S, O’Donoghue L, Charitidis C (2018) Additive manufacturing: scientific and technological challenges, market uptake and opportunities. Mater Today 21(1):22–37
Mackay ME (2018) The importance of rheological behavior in the additive manufacturing technique material extrusion. J Rheol 62(6):1549–1561
Es-Said O, Foyos J, Noorani R, Mendelson M, Marloth R, Pregger B (2000) Effect of layer orientation on mechanical properties of rapid prototyped samples. Mater Manuf Process 15(1):107–122
Sood AK, Ohdar RK, Mahapatra SS (2010) Parametric appraisal of mechanical property of fused deposition modelling processed parts. Mater Des 31(1):287–295
Rankouhi B, Javadpour S, Delfanian F, Letcher T (2016) Failure analysis and mechanical characterization of 3D printed ABS with respect to layer thickness and orientation. J Fail Anal Prev 16(3):467–481
Letcher T, Rankouhi B, Javadpour S (2015) Presented at the ASME 2015 international mechanical engineering congress and exposition, 2015 (unpublished)
Ziemian C, Sharma M, Ziemian S (2012) Mechanical engineering. InTechOpen
Riddick JC, Haile MA, Von Wahlde R, Cole DP, Bamiduro O, Johnson TE (2016) Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modeling. Addit Manuf 11:49–59
Seppala JE, Han SH, Hillgartner KE, Davis CS, Migler KB (2017) Weld formation during material extrusion additive manufacturing. Soft Matter 13(38):6761–6769
Coogan TJ, Kazmer DO (2017) Bond and part strength in fused deposition modeling. Rapid Prototyp J 23(2):414–422
Gardea F, Cole DP, Glaz B, Riddick JC (2019) Energy dissipation characteristics of additively manufactured CNT/ABS nanocomposites. Rapid Prototyp J 26(3):509–517
Mueller J, Courty D, Spielhofer M, Spolenak R, Shea K (2017) Mechanical properties of interfaces in inkjet 3D printed single-and multi-material parts. 3D Print Addit Manuf 4(4):193–199
Levenhagen NP, Dadmun MD (2017) Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples. Polymer 122:232–241
Hart KR, Dunn RM, Sietins JM, Mock CMH, Mackay ME, Wetzel ED (2018) Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing. Polymer 144:192–204
Ravi AK, Deshpande A, Hsu KH (2016) An in-process laser localized pre-deposition heating approach to inter-layer bond strengthening in extrusion based polymer additive manufacturing. J Manuf Process 24:179–185
Sweeney CB, Lackey BA, Pospisil MJ, Achee TC, Hicks VK, Moran AG, Teipel BR, Saed MA, Green MJ (2017) Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating. Sci Adv 3(6):e1700262
Yardimci MA, Hattori T, Guceri SI, Danforth SC (1997). In: Bourell DL, Beaman JJ, Crawford RH, Marcus HL, Barlow JW (eds) Sol freeform fabric. Univ Texas Austin, Austin, pp 689–698
D’Amico A, Peterson AM (2018) An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D. Addit Manuf 21:422–430
Luo C, Wang X, Migler KB, Seppala JE (2020) Upper bound of feed rates in thermoplastic material extrusion additive manufacturing. Addit Manuf 32:8
Xia HX, Lu JC, Tryggvason G (2019) Simulations of fused filament fabrication using a front tracking method. Int J Heat Mass Transf 138:1310–1319
McIlroy C, Olmsted PD (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. J Rheol 61(2):379–397
Bartolai J, Simpson TW, Xie RX (2018) Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion. Rapid Prototyp J 24(2):321–332
Coogan TJ, Kazmer DO (2019) Modeling of interlayer contact and contact pressure during fused filament fabrication. J Rheol 63(4):655–672
McIlroy C, Olmsted PD (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer 123:376–391
McIlroy C, Graham RS (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Addit Manuf 24:323–340
Bain ED, Garboczi EJ, Seppala JE, Parker TC, Migler KB (2019) AMB2018-04: benchmark physical property measurements for powder bed fusion additive manufacturing of polyamide 12. Integr Mater Manuf I 8(3):335–361
Levine L, Lane B, Heigel J, Migler K, Stoudt M, Phan T, Ricker R, Strantza M, Hill M, Zhang F, Seppala J, Garboczi E, Bain E, Cole D, Allen A, Fox J, Campbell C (2020) Outcomes and conclusions from the 2018 AM-bench measurements, challenge problems, modeling submissions, and conference. Integr Mater Manuf Innov 9(1):1–15
Miller A, Brown C, Warner G (2019) Guidance on the use of existing ASTM polymer testing standards for ABS parts fabricated using FFF. Smart Sustain Manuf Syst 3(1):122–138
Daniel IM, Ishai O, Daniel IM, Daniel I (1994) Engineering mechanics of composite materials. Oxford University Press, New York
Yang J, Song B, Zhong X, Jin P (2016) Optimal design of blended composite laminate structures using ply drop sequence. Compos Struct 135:30–37
Sudhagar PE, Babu AA, Rajamohan V, Jeyaraj P (2017) Structural optimization of rotating tapered laminated thick composite plates with ply drop-offs. Int J Mech Mater Des 13(1):85–124
Henry TC, Riddick JC, Mills BT, Habtour EM (2017) Composite driveshaft prototype design and survivability testing. J Compos Mater 51(16):2377–2386
Henry T, Mills B (2019) Optimized design for projectile impact survivability of a carbon fiber composite drive shaft. Compos Struct 207:438–445
Campilho RD, Banea MD, Pinto AM, da Silva LF, De Jesus A (2011) Strength prediction of single-and double-lap joints by standard and extended finite element modelling. Int J Adhes Adhes 31(5):363–372
Ribeiro T, Campilho R, Da Silva L, Goglio L (2016) Damage analysis of composite–aluminium adhesively-bonded single-lap joints. Compos Struct 136:25–33
Liu H, Ojha A, Li Z, Engler-Pinto CC Jr, Su X, Sun Q, Kang H, Wen W, Cui H (2019) Fatigue modeling for carbon/epoxy unidirectional composites under various stress ratios considering size effects. Int J Fatigue 120:184–200
Chamis CC, Sinclair JH (1977) Ten-deg off-axis test for shear properties in fiber composites. Exp Mech 17(9):339–346
Coogan TJ, Kazmer DO (2019) In-line rheological monitoring of fused deposition modeling. J Rheol 63(1):141–155
Cicala G, Giordano D, Tosto C, Filippone G, Recca A, Blanco I (2018) Polylactide (PLA) filaments a biobased solution for additive manufacturing: correlating rheology and thermomechanical properties with printing quality. Materials 11(7):13
Li H, Zhang S, Yi ZR, Li J, Sun AH, Guo JJ, Xu GJ (2017) Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling. Rapid Prototyp J 23(6):973–982
Northcutt LA, Orski SV, Migler KB, Kotula AP (2018) Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing. Polymer 154:182–187
Srinivas V, van Hooy-Corstjens CSJ, Harings JAW (2018) Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides. Polymer 142:348–355
Chen RK, Lo TT, Chen L, Shih AJ (2015) Nano-CT characterization of structural voids and air bubbles in fused deposition modeling for additive manufacturing. In: ASME international manufacturing science and engineering conference, paper no: MSEC2015-9462, V001T02A071. https://doi.org/10.1115/MSEC2015-9462
Nouri H, Guessasma S, Belhabib S (2016) Structural imperfections in additive manufacturing perceived from the X-ray micro-tomography perspective. J Mater Process Tech 234:113–124
Xu N, Ye XJ, Wei DX, Zhong J, Chen YY, Xu GH, He DN (2014) 3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair. ACS Appl Mater Inter 6(17):14952–14963
Hutmacher DW, Schantz T, Zein I, Ng KW, Teoh SH, Tan KC (2001) Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. J Biomed Mater Res 55(2):203–216
Shor L, Guceri S, Wen XJ, Gandhi M, Sun W (2007) Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro. Biomaterials 28(35):5291–5297
Cole DP, Riddick JC, Jaim HMI, Strawhecker KE, Zander NE (2016) Interfacial mechanical behavior of 3D printed ABS. J Appl Polym Sci 133(30):43671
Ziemian S, Okwara M, Ziemian CW (2015) Tensile and fatigue behavior of layered acrylonitrile butadiene styrene. Rapid Prototyp J 21(3):270–278
Liu C, He J, Van Ruymbeke E, Keunings R, Bailly C (2006) Evaluation of different methods for the determination of the plateau modulus and the entanglement molecular weight. Polymer 47(13):4461–4479
Williams ML, Landel RF, Ferry JD (1955) The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J Am Chem Soc 77(14):3701–3707
Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7(6):1564–1583
Feng Y, Siegmund T, Habtour E, Riddick J (2015) Impact mechanics of topologically interlocked material assemblies. Int J Impact Eng 75:140–149
Dealy JM, Read DJ, Larson RG (2018) Structure and rheology of molten polymers: from structure to flow behavior and back again. Carl Hanser Verlag GmbH Co KG, Munich
Lomellini P (1992) Effect of chain length on the network modulus and entanglement. Polymer 33(6):1255–1260
Zoller P (1982) A study of the pressure-volume-temperature relationships of four related amorphous polymers: polycarbonate, polyarylate, phenoxy, and polysulfone. J Polym Sci Polym Phys Edn 20(8):1453–1464
Plummer C, Soles C, Xiao C, Wu J, Kausch H-H, Yee A (1995) Effect of limiting chain mobility on the yielding and crazing behavior of bisphenol—a polycarbonate derivatives. Macromolecules 28(21):7157–7164
Wimberger-Friedl R, Hut M, Schoo H (1996) Chain stiffness of copolycarbonates containing a spiro linkage. Macromolecules 29(16):5453–5458
Lomellini P (1992) Viscosity-temperature relationships of a polycarbonate melt: Williams–Landel–Ferry versus arrhenius behaviour. Die Makromolekulare Chemie 193(1):69–79
Illers K, Breuer H (1961) Ein Torsionspendel zur genauen und schnellen Bestimmung der dynamisch-mechanischen Eigenschaften visko-elastischer Stoffe (Messungen an Polycarbonaten). Kolloid-Zeitschrift 176(2):110–119
Hoffman JD (1969) Anelastic and dielectric effects in polymeric solids. McCrum NG, Read BE, Williams G (1967) Wiley, New York, pp 617. J Appl Polym Sci 13(2):397–397
Yee A, Smith S (1981) Molecular structure effects on the dynamic mechanical spectra of polycarbonates. Macromolecules 14(1):54–64
Hutchinson J, Smith S, Horne B, Gourlay G (1999) Physical aging of polycarbonate: enthalpy relaxation, creep response, and yielding behavior. Macromolecules 32(15):5046–5061
Stauffer D, Aharony A (1994) Introduction to percolation theory. Taylor & Francis, London
Garboczi EJ, Bentz DP (2001) The effect of statistical fluctuation, finite size error, and digital resolution on the phase percolation and transport properties of the NIST cement hydration model. Cem Concr Res 31(10):1501–1514
Chen X, Yan J, Karlsson AM (2006) On the determination of residual stress and mechanical properties by indentation. Mater Sci Eng A 416(1–2):139–149
Saha R, Nix WD (2002) Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater 50(1):23–38
Forster AM, Michaels CA, Sung L, Lucas J (2009) Modulus and chemical mapping of multilayer coatings. ACS Appl Mater Interfaces 1(3):597–603
Jakes JE, Frihart CR, Beecher JF, Moon RJ, Stone D (2008) Experimental method to account for structural compliance in nanoindentation measurements. J Mater Res 23(4):1113–1127
Cole DP, Gardea F, Henry TC, Seppala JE, Garboczi EJ, Migler KD, Shumeyko CM, Westrich JR, Orski SV, Gair JL (2018) 2018 AM-bench test descriptions for AMB2018-03. 25 September 2020. https://www.nist.gov/ambench/amb2018-03-description