A stochastic based approach for a new site classification method: application to the Algerian seismic code

Springer Science and Business Media LLC - Tập 14 - Trang 663-681 - 2015
Mohamed Beneldjouzi1, Nasser Laouami2
1Civil Engineering Faculty, University of Sciences and Technology Houari Boumediene (USTHB), Algiers, Algeria
2Earthquake Engineering Applied Research Center (CGS), Rue Kaddour Rahim, Algiers, Algeria

Tóm tắt

Building codes have widely considered the shear wave velocity to make a reliable subsoil seismic classification, based on the knowledge of the mechanical properties of material deposits down to bedrock. This approach has limitations because geophysical data are often very expensive to obtain. Recently, other alternatives have been proposed based on measurements of background noise and estimation of the H/V amplification curve. However, the use of this technique needs a regulatory framework before it can become a realistic site classification procedure. This paper proposes a new formulation for characterizing design sites in accordance with the Algerian seismic building code (RPA99/ver.2003), through transfer functions, by following a stochastic approach combined to a statistical study. For each soil type, the deterministic calculation of the average transfer function is performed over a wide sample of 1-D soil profiles, where the average shear wave (S-W) velocity, V s, in soil layers is simulated using random field theory. Average transfer functions are also used to calculate average site factors and normalized acceleration response spectra to highlight the amplification potential of each site type, since frequency content of the transfer function is significantly similar to that of the H/V amplification curve. Comparison is done with the RPA99/ver.2003 and Eurocode8 (EC8) design response spectra, respectively. In the absence of geophysical data, the proposed classification approach together with micro-tremor measures can be used toward a better soil classification.

Tài liệu tham khảo

Ambraseys N, Smit P, Sigbjornsson R, Suhadolc P and Margaris B (2002), Internet-site for European Strong-Motion Data. European Commission, Research-Directorate General, Environment and Climate Programme.

Bard PY (1999), “Microtremor Measurements: a Tool for Site Effect Estimation-” In: Irikura K, Kudo K, Okada H, Sasatani T (eds) The Effects of Surface Geology on Seismic Motion, Balkema, Rotterdam, pp 1251–1279.

Benouar D (1994), “The Seismicity of Algeria and Adjacent Regions,” Annali Di Geofisica 37: 459–862.

Cadet H, Bard PY and Duval M (2008), “A New Proposal for Site Classification Based on Ambient Vibration Measurement and the Kik-net Strong Motion Data Set,” 14th World Conference on Earthquake Engineering, October 12-17, Beijing, China.

CRAAG (1994), “Les séismes de l’Algérie de 1365 à 1992,” Publication du CRAAG, Alger, 227 p.

Eurocode 8 (2004), Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings, European Standard EN 1998- 1:2004 Comité Européen de Normalisation, Brussels, Belgium

Fenton AG and Griffiths DV (2000), “Bearing Capacity of Spatially Random Soils,” 8th ASCE Conference on Probabilistic Mechanics and Structural Reliability, PMC2000-097.

Ghasemi H, Zare M, Fukushima Y and Sinaeian F (2009), “Applying Empirical Method in Site Classification, Using Response Spectral Ratio (H/V), A Case Study on Iranian Strong Motion Network (ISMN),” Soil Dynamics and Earthquake Engineering, 29: 121–132.

JICA and CGS (2006), “A Study of Seismic Microzoning of the Wilaya of Algiers in the People’s Democratic Republic of Algeria,” Final Report, 2: Oyo International Corp. Nippon Koei Co., Ltd.

Laouami N and Slimani A (2013), “Earthquake Induced Site Effect in the Algiers–Boumerdes Region: Relation between Spectral Ratios Higher Peaks and Observed Damage during the May 21st Mw 6.8 BoumerdesEarthquake (Algeria),” Pure and Applied Geophysics. DOI 10.1007/s00024-012-0612-3.

Nakamura Y (1989), “A Method for Dynamic Characteristic Estimates of Subsurface Using Microtremor on the Ground Surface,” Q. Rep Railway Tech Res Inst, 30: 25–33.

Nogoshi M and Igarashi T (1971), “On the Amplitude Characteristics of Microtremor (Part 2) (in Japanese with English Abstract),” Journal of Seismological Society of Japan, 24: 26–40.

Pitilakis K, Gazepis C and Anastasiadis A (2004), “Design Response Spectra and Soil Classification for Seismic Code Provisions,” Proceedings of 13th World Conference on Earthquake Engineering, Paper n. 2904, Vancouver,B.C., Canada.

Pitilakis K, Riga E and Anastasiadis A (2012), “New Code Site Classification, Amplification Factors and Normalized Response Spectra Based on a World Wide Ground-motion Database,” Bull Earthquake Eng., 11: 925–966.

Saman YS and Tsang HH (2011), “A New Site Classification Approach Based on Neural Networks,” Soil Dynamics and Earthquake Engineering, 33: 974–981.

Seed HB and Sun JH (1989), “Implication of Site Effects in the Mexico City Earthquake of September 19, 1985 for Earthquake-resistance-design Criteria in the San Francisco Bay Area of California,” Report N°. UCB/EERC-89/03, University of California, Berkeley, California.

Wen R, Ren Y, Zhou Z and Shi D (2010), “Preliminary Site Classification of Free-field Strong Motion Stations Based on Wenchuan Earthquake Records,” Earthquake Science, 23: 101–110.

Zhao JX, Irikura K, Zhang J, Fukushima Y, Somerville PG, Asano A et al., (2006), “An Empirical Site-Classification Method for Strong Strong-motion Stations in Japan Using H/V response Spectral Ratio,” Bull Seismol Soc Am, 96(3): 914–925.

Zhao JX, Irikura K, Zhang J, Fukushima Y, Somerville PG and Saiki T (2004), “Site Classification for Strong Strong-motion Stations in Japan Using H/V Response Spectral Ratio,” Proceeding of 13th World Conference on Earthquake Engineering, Vancouver, Canada.