A numerical investigation of the influence of friction on energy absorption by a high-strength fabric subjected to ballistic impact

International Journal of Impact Engineering - Tập 32 - Trang 1299-1312 - 2006
Y. Duan1, M. Keefe2, T.A. Bogetti3, B.A. Cheeseman3, B. Powers3
1Center for Composite Materials, University of Delaware, Newark, DE 19716, USA
2Department of Mechanical Engineering, University of Delaware, Newark, DE 19716, USA
3US Army Research Laboratory, Aberdeen Proving Ground, MD 21005, USA

Tài liệu tham khảo

Tan, 2003, Perforation of high-strength fabric by projectiles of different geometry, Int J Impact Eng, 28, 207, 10.1016/S0734-743X(02)00055-6

Briscoe, 1992, The ballistic impact characteristics of aramid fabrics, Wear, 158, 229, 10.1016/0043-1648(92)90041-6

Bazhenov, 1997, Dissipation of energy by bulletproof aramid fabric, J Mater Sci, 32, 4167, 10.1023/A:1018674528993

Duan Y, Keefe M, Bogetti TA, Cheeseman BA. Modeling friction effects on the ballistic impact behavior of a single-ply high-strength fabric. Int J Impact Eng 2004; in press, doi:10.1016/j.ijimpeng.2004.06.008.

Cheeseman, 2003, Ballistic impact into fabric and compliant composite laminates, Compos Struct, 61, 161, 10.1016/S0263-8223(03)00029-1

Cunniff, 1992, An analysis of the system effects in woven fabrics under ballistic impact, Text Res J, 62, 495, 10.1177/004051759206200902

Shim, 1995, Modeling deformation and damage characteristics of woven fabric under small projectile impact, Int J Impact Eng, 16, 585, 10.1016/0734-743X(94)00063-3

Lim, 2002, Perforation of high-strength double-ply fabric system by varying shaped projectiles, Int J Impact Eng, 27, 577, 10.1016/S0734-743X(02)00004-0

Gu, 2003, Analytical modeling for the ballistic perforation of planar plain-woven fabric target by projectile, Compos Part B-Eng, 34, 361, 10.1016/S1359-8368(02)00137-3

Starratt, 2000, An efficient method for continuous measurement of projectile motion in ballistic impact experiments, Int J Impact Eng, 24, 155, 10.1016/S0734-743X(99)00045-7

Shockey DA, Erlich DC, Simons JW. Improved barriers to turbine engine fragment. US Department of Transportation, Federal Aviation Administration, DOT/FAA/AR-99/8 III, 2001.

Billon, 2001, Models for the ballistic impact of fabric armour, Int J Impact Eng, 25, 411, 10.1016/S0734-743X(00)00049-X

Parga-landa, 1995, An analytical model to predict impact behaviour of soft armours, Int J Impact Eng, 16, 455, 10.1016/0734-743X(94)00054-Z

Wilde, 1973, Photographic investigation of high-speed missile impact upon nylon fabric. Part I, Text Res J, 43, 753, 10.1177/004051757304301212

Lee, 2001, Penetration failure mechanisms of armor-grade fiber composites under impact, J Comp Mater, 35, 1605, 10.1106/YRBH-JGT9-U6PT-L555

Duan, 2003, Impact behavior and modeling of engineering polymers, Polym Eng Sci, 43, 112, 10.1002/pen.10010

Thông tin
Thông tin xuất bản

International Journal of Impact Engineering

Tập 32

1299-1312

Thông tin tác giả