An efficient method for continuous measurement of projectile motion in ballistic impact experiments

Zukas, 1982 Delfosse, 1993, Instrumented impact testing at high velocities, J Compos Technol Res, 15, 38, 10.1520/CTR10352J Wilde, 1973, Photographic investigation of high-speed missile impact upon nylon fabric, Part I: energy absorption and cone radial velocity in fabric, Textile res J, 43, 753, 10.1177/004051757304301212 Khetan, 1983, Surface damage of sheet molding compound panels subjected to point impact loading, J Compos Mater, 17, 182, 10.1177/002199838301700206 Prosser, 1988, Penetration of nylon ballistic panels by fragment-simulating projectiles. Part I, Textile Res J, 61, 10.1177/004051758805800201 Taylor, 1990, Modeling ballistic impact into flexible materials, AIAA J, 28, 2098, 10.2514/3.10527 Cantwell, 1985, Detection of impact damage in CFRP laminates, Compos Struct, 3, 241, 10.1016/0263-8223(85)90056-X Zee, 1989, Microvelocity sensor for instantaneous velocity determination, Rev Sci Instr, 60, 3692, 10.1063/1.1140476 Nurick, 1985, A new technique to measure the deflection-time history of a structure subjected to high strain rates, Int J Impact Eng, 3, 17, 10.1016/0734-743X(85)90022-3 Hodgkinson, 1982, Drop-weight impact tests with the use of laser-doppler velocimetry, Proc Roy Soc London Series A Math Phys Sci, 379, 133, 10.1098/rspa.1982.0009 Gupta, 1989, Laser speckle interferometry applied to studying transient vibrations of a cantilever beam, J Sound Vib, 133, 251, 10.1016/0022-460X(89)90925-5 Wu, 1994, Penetration force measurements of thin plates by laser doppler anemometry, Exp Mech, 34, 93, 10.1007/BF02325705 Espinosa HD, Lu HC, Xu Y. A novel technique for penetrator velocity measurement in ballistic penetration studies. Advances in failure mechanisms in brittle materials, MD-vol. 75/AMD-vol. 219. New York: ASME, 1996, p. 23–47. Ramesh, 1995, Technique for the continuous measurement of projectile velocities in plate impact experiments, Rev Sci Instr, 66, 3034, 10.1063/1.1145524 Sanders TA. Penetration of composite laminates by conical indenters and projectiles. Masters thesis, Department of Civil Engineering, The University of British Columbia, Vancouver, British Columbia, July 1997. National Instruments Corporation. Data acquisition basic manual, LabVIEW Version 5.0. January 1998, p. 2 (Chapter 5). Starratt DL. An instrumented experimental study of the ballistic response of textile materials. Masters thesis, Department of Metals and Materials Engineering, The University of British Columbia, Vancouver, British Columbia, April 1998. Thiruppukuzhi, 1998, Testing and modeling high strain rate behaviour of polymeric composites, Composites Part B, 29B, 535, 10.1016/S1359-8368(98)00009-2