A comparison of homogenization and standard mechanics analyses for periodic porous composites

Scott J. Hollister1, Noboru Kikuchi2
1Orthopaedic Research Laboratories, Section of Orthopaedic Surgery, The University of Michigan, Ann Arbor, USA
2Computational Mechanics Laboratory, Department of Mechanical Engineering and Applied Mechanics, The University of Michigan, Ann Arbor, USA

Tóm tắt

Từ khóa


Tài liệu tham khảo

Accorsi, M. L. (1988): A method for modelling microstructural material discontinuities in a finite element analysis. Int. J. Num. Meth. Eng. 36, 2187?2197

Accorsi, M. L.; Nemat-Nasser, S. (1986): Bounds on the overall elastic and instantaneous elastoplastic moduli of periodic composites. Mech. Materials 5, 209?220

Babuska, I. (1976a): Homogenization approach in engineering. Proc. 2nd Int. Symposium on Comp. Meth. in App. Science and Eng. 137?153. Berlin, Heidelberg, New York: Springer

Babuska, I. (1976b): Solution of interface problems by homogenization. I. SIAM J. Math. Anal. 7, 603?634

Babuska, I. (1976c): Solution of interface problems by homogenization. II. SIAM J. Math. Anal. 7, 635?645

Babuska, I. (1976d): Solution of interface problems by homogenization. III. SIAM J. Math. Anal. 7, 923?937

Bakhvalov, N.; Panasenko, G. (1989): Homogenization: averaging processes in periodic media. Dordrecht, The Netherlands: Kluwer Academic Publishers

Beaupre, G.; Hayes, W. (1985): Finite element analysis of a three-dimensional open-celled model for trabecular bone. J. Biomech. Eng. 107, 249?256

Bensoussan, A.; Lions, J.; Papanicolaou, G. (1978): Asymptotic Analysis for Periodic Structures. Amsterdam: North-Holland

Benveniste, Y. (1987): A new approach to the application of Mori-Tanaka's theory in composite materials. Mech. Materials 6, 147?157

Bourgat, J. (1977): Numerical experiments of the homogenization method for operators with periodic coefficients. In: Dold, A.; Eckmann, B. (eds): Lecture Notes in Mathematics 704, pp. 330?356. Berlin, Heidelberg, New York: Springer

Budiansky, B. (1965): On the elastic moduli of some heteorogeneous materials. J. Mech. Phys. Solids 13, 223?227

Christenson, R. (1986): Mechanics of low density materials. J. Mech. Phys. Solids 34, 563?578

Cleary, M. P.; Chen, I. W.; Lee, S. M. (1980): Self-consistent techniques for heterogeneous solids. ASCE J. Eng. Mech. 106, 861?887

Dumontet, H. (1985): Boundary layer stresses in elastic composites. In: Ladeveze, P. (ed): Local Effects in the Analysis of Structures. Amsterdam: Elsevier 115?232

Duvaut, G. (1976): Homogeneization et materiaux composite. In: Ciarlet, P.; Rouseau, M. (eds): Theoretical and Applied Mechanics. Amsterdam: North-Holland

Eshelby, J. D. (1957): The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. London A 241, 376?396

Fung, Y. (1965): Foundations of Solid Mechanics, Englewood Cliffs: Prentice-Hall

Gibson, L.; Ashby, M. (1982): The mechanics of three-dimensional cellular materials. Proc. R. Soc. London A 382, 43?59

Gibson, L.; Ashby, M. (1988): Cellular Solids: Structure and Properties. Oxford: Pergamon Press

Guedes, J. (1990): Nonlinear computational models for composite materials using homogenization. Ph.D. Dissertation, Ann Arbor: The University of Michigan

Guedes, J.; Kikuchi, N. (1990): Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element solutions. Com. Mech. App. Meth. Eng. 83, 143?198

Hashin, Z. (1983): Analysis of composite materials?a survey. J. App. Mech. 50, 481?505

Hashin, Z.; Shtrikman, S. (1962): A variational approach to the theory of the elastic behavior of polycrystals. J. Mech. Phys. Solids 10, 343?352

Hashin, Z.; Shtrikman, S. (1963): A variational approach to the theory of the elastic behavior of multiphase materials. J. Mech. Phys. Solids 11, 127?140

Hill, R. (1963): Elastic properties of reinforced solids: some theoretical principles. J. Mech. Phys. Solids 11, 357?372

Hill, R. (1965): A self consistent mechanics of composite materials. J. Mech. Phys. Solids 13, 213?222

Huber, A.; Gibson, L. (1988): Anisotropy of foams. J. Mat. Sci. 23, 3031?3040

Iremonger, M. J.; Lawler, J. P. (1980): Relationship between modulus and density for high-density closed cell thermoplastic foams. J. App. Polymer Sci. 25, 809?819

Ishai, O.; Cohen, L. J. (1967): Elastic properties of filled and porous epoxy composites. Int. J. Mech. Sci. 9, 539?546

Iwakuma, T.; Nemat-Nasser, S. (1983): Composites with periodic microstructure. Comput. Struct. 16, 13?19

Kanakkanatt, S. V. (1973): Mechanical anisotropy of open-cell foams. J. Cell. Plast. 9, 50?53

Keller, J. B. (1977): Effective behavior of heterogenous media. Proc. Symposium on Statistical Mechanics and Statistical Methods, Plenum Press, 631?644

Kikuchi, N. (1986): Finite Element Methods in Mechanics. Cambridge: Cambridge University Press

Kikuchi, N. (in preparation): Variational methods and optimization in mechanics. Englewood Cliffs: Prentice-Hall

Ko, W. (1965): Deformations of foamed elastomers. J. Cell. Plast. 1, 45?50

Kroner, E. (1977): Bounds for effective elastic moduli of disordered materials. J. Mech. Phys. Solids 25, 137?155

Larsen, E. W. (1975): Neutron transport and diffusion in inhomogeneous media. I. J. Math. Phys. 16, 1421?1427

Lederman, J. M. (1971): The prediction of the tensile properties of flexible foams. J. App. Polymer Sci. 15, 693?703

Lene, F.; Leguillon, D. (1982): Homogenized constitutive law for a partially cohesive composite material. Int. J. Solids Struct. 5, 443?458

Lions, J. (1981): Some methods in the Mathematical Analysis Analysis of Systems and their Control. New York: Gordon and Breach Science Publishers

Lions, J. L. (1980): Asymptotic expansions in perforated media with a periodic structure. Rocky Mountain J. Math. 10, 125?140

Mori, T.; Tanaka, K. (1973): Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 231, 571?574

Mura, T. (1982): Micromechanics of defectsin solids. The Hague: Martinus Nijhoff

Murakami, H.; Toledano, A. (1990): A high-order mixture homogenization of bi-laminated composites. J. App. Mech. 57, 388?396

Murakami, H.; Maewal, A.; Hegemier, G. A. (1981): A mixture theory with a director for linear elastodynamics of periodically laminated media. Int. J. Solids Struct. 17, 155?173

Nemat-Nasser, S.; Taya, M. (1981): On effective moduli of an elastic body containing periodically distributed voids. Quart. J. App. Math. 39, 43?59

Nemat-Nasser, S.; Iwakuma, T.; Hejazi, M. (1982): On composites with periodic structure. Mech. Materials 1, 239?267

Norris, A. N. (1985): A differential scheme for the effective moduli of composites. Mech. Materials 4, 1?16

Norris, A. N. (1989): An examination of the Mori-Tanaka effective medium approximation for multiphase composites. J. App. Mech. 56, 83?88

Patel, M.; Finnie, I. (1970): Structural features and mechanical properties of rigid cellular plastics. J. Mater. 5, 909?932

Reuss, A. (1929): Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle. Z. Angew. Math. Mech. 9, 49?58

Sanchez-Palencia, E. (1974): Comportements local et macroscopique d'un type de milieux physiques heterogenes. Int. J. Eng. Sci. 12, 331?351

Sanchez-Palencia, E. (1980): Non-Homogeneous Media and Vibration Theory. Berlin, Heidelberg, New York: Springer

Sanchez-Palencia, E. (1987): Boundary layers and edge effects in composites. In: Sanchez-Palencia, E.; Zaoui, A. (eds): Homogenization techniques for composite media, pp. 194?278. Berlin, Heidelberg, New York: Springer

Suquet, P. (1987): Elements of homogenization theory for inelastic solid mechanics. In: Sanchez-Palencia, E.; Zaoui, A. (eds): Homogenization techniques for composite media, pp. 194?278. Berlin, Heidelberg, New York: Springer

Voigt, W. (1889): Über die Beziehung zwischen den beiden Elastizitätskonstanten isotroper Körper, Wied. Ann. 38, 573?587

Walpole, L. J. (1966a): On bounds for the overall elastic moduli of inhomogeneous systems?I. J. Mech. Phys. Solids 14, 151?162

Walpole, L. J. (1966b): On bounds for the overall elastic moduli of inhomogeneous systems?II. J. Mech. Phys. Solids 14, 289?301

Warren, W. E.; Kraynik, A. M. (1988): The linear elastic properties of open-cell foams. J. App. Mech. 55, 341?346

Willis, J. R. (1977): Bounds and self-consistent estimates for the overall properties of anisotropic composites. J. Mech. Phys. Solids 25, 185?202

Zhikov, V. V.; Kozlov, S. M.; Oleinik, O. A.; Kha Ten Ngoan (1979): Averaging and G-convergence of differential operators. Rus. Math. Survey 34, 69?147