A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates
Tóm tắt
Tài liệu tham khảo
Chen BQ, Guedes Soares C (2016a) Effects of plate configurations on the weld induced deformations and strength of fillet-welded plates. Mar Struct 50:243–259. https://doi.org/10.1016/j.marstruc.2016.09.004
Chen BQ, Guedes Soares C (2016b) Effect of welding sequence on temperature distribution, distortions, and residual stress on stiffened plates. Int J Adv Manuf Technol 86:3145–3156. https://doi.org/10.1007/s00170-016-8448-0
Cui W, Mansour AE (1998) Effects of welding distortions and residual stresses on the ultimate strength of long rectangular plates under uniaxial compression. Mar Struct 11:251–269. https://doi.org/10.1016/S0951-8339(98)00012-4
Deng D, Liang W, Murakawa H (2007) Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental measurements. J Mater Process Technol 183:219–225. https://doi.org/10.1016/j.jmatprotec.2006.10.013
Gannon L, Liu Y, Pegg N, Smith MJ (2010) Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates. Mar Struct 23:385–404. https://doi.org/10.1016/j.marstruc.2010.05.002
Gannon L, Liu Y, Pegg N, Smith MJ (2012) Effect of welding-induced residual stress and distortion on ship hull girder ultimate strength. Mar Struct 28:25–49. https://doi.org/10.1016/j.marstruc.2012.03.004
Garbatov Y, Saad-Eldeen S, Guedes Soares C (2015) Hull girder ultimate strength assessment based on experimental results and the dimensional theory. Eng Struct 100:742–750. https://doi.org/10.1016/j.engstruct.2015.06.003
Gordo JM, Guedes Soares C (2008) Experimental evaluation of the behaviour of a mild steel box girder under bending moment. Ships Offshore Struct 3:347–358. https://doi.org/10.1080/17445300802370479
Guedes Soares C (1992) Design equation for ship plate elements under uniaxial compression. J Constr Steel Res 22:99–114. https://doi.org/10.1016/0143-974X(92)90010-C
Guedes Soares C, Gordo JM (1996) Compressive strength of rectangular plates under biaxial load and lateral pressure. Thin-Walled Struct 24:231–259. https://doi.org/10.1016/0263-8231(95)00030-5
Guedes Soares C, Gordo JM (1997) Design methods for stiffened plates under predominantly uniaxial compression. Mar Struct 10:465–497. https://doi.org/10.1016/S0951-8339(97)00002-6
International Association of Classification Societies (2006) Common structural rules for bulk carrier. IACS, London
Khan I, Zhang S (2011) Effects of welding-induced residual stress on ultimate strength of plates and stiffened panels. Ships Offshore Struct 6:297–310. https://doi.org/10.1080/17445301003776209
Mondal AK, Biswas P, Bag S (2015) Influence of tacking sequence on residual stress and distortion of single sided fillet submerged arc welded joint. J Mar Sci Appl 14:250–260. https://doi.org/10.1007/s11804-015-1320-z
Paik JK, Sohn JM (2012) Effects of welding residual stresses on high tensile steel plate ultimate strength: nonlinear finite element method investigations. J Offshore Mech Arct Eng 134(2):021401. https://doi.org/10.1115/1.4004510
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2013) Experimental assessment of corroded steel box-girders subjected to uniform bending. Ships Offshore Struct 8:653–662. https://doi.org/10.1080/17445302.2012.718171
Smith CS (1977) Influence of local compressive failure on ultimate longitudinal strength of a ship’s hull. Proceedings of the International Symposium on PRADS, Tokyo, Japan, 73–79
Smith CS, Anderson N, Chapman JC, Davidson PC, Dowling PJ (1992) Strength of stiffened plating under combined compression and lateral pressure. Trans RINA 134:131–147
Ueda Y, Masaoka K (1995) Ultimate strength analysis of thin plated structures using eigen-functions (2nd report): rectangular plate element with initial imperfection. J Soc Naval Architects Jpn 178:463–471 (In Japanese)
Yao T, Nikolov PI (1991) Progressive collapse analysis of a ship’s hull under longitudinal bending. J Soc Naval Architects Jpn 1991(170):449–461. https://doi.org/10.2534/jjasnaoe1968.1991.170_449
Yao T, Astrup OC, Caridis P, Chen YN, Cho SR, Dow RS et al (2000) Ultimate hull girder strength. ISSC Special Task Committee VI.2, Proceedings of the 14th International Ship and Offshore Structures Congress, Nagasaki, Japan