A finite line crack in a pressurized spherical shell

International Journal of Fracture Mechanics - Tập 1 - Trang 20-46 - 1965
Efthymios S. Folias

Tóm tắt

The deformation of a thin sheet having initial spherical curvature is shown to be associated with that of an initially flat plate resting upon an elastic foundation. Using an integral formulation the coupled Reissner equations for a shell with a crack of length 2c are solved for the in-plane and Kirchhoff bending stresses, and, among other things, it is found that the explicit nature of the stresses near the crack point depends upon the inverse half power of the non-dimensional distance from the point e. The character of the combined extension-bending stress field near the crack tip is investigated in detail for the special case of a radial crack in a spherical cap which is subjected to a uniform internal pressure qo and is clamped at the boundary $$\overline {\text{R}} = \overline {\text{R}} _{\text{o}}$$ . Pending a complete study of the solution, approximate results for the combined surface stresses near the crack tip normal and along the line of crack prolongation are respectively of the form $$\sigma _y (\varepsilon ,0)|_{\nu = {1 \mathord{\left/ {\vphantom {1 3}} \right. \kern-\nulldelimiterspace} 3}} \approx 0.45\sqrt {{1 \mathord{\left/ {\vphantom {1 \varepsilon }} \right. \kern-\nulldelimiterspace} \varepsilon }} \tfrac{{q_O R}}{h} + ...$$ $$\lambda = 0.98$$ $${\text{c = 0}}{\text{.23 in}}$$ $$\overline {\text{R}} _{\text{o}} = 4.25 {\text{in}}$$ and similarly $$\sigma _x (\varepsilon ,0)|_{\nu = {1 \mathord{\left/ {\vphantom {1 3}} \right. \kern-\nulldelimiterspace} 3}} \approx 0.45\sqrt {{1 \mathord{\left/ {\vphantom {1 \varepsilon }} \right. \kern-\nulldelimiterspace} \varepsilon }} \tfrac{{q_O R}}{h} + ...$$ $$\lambda = 0.98$$ $${\text{c = 0}}{\text{.23 in}}$$ $$\overline {\text{R}} _{\text{o}} = 4.25 {\text{in}}$$ It is interesting to note that the stress σx and σy, along the line of crack prolongation, for this geometry are equal. In general, they will be of the same sign and will differ only slightly in magnitude due to the bending component. Finally, the experimental and theoretical results for εy, along the line of crack prolongation, compare very well.

Tài liệu tham khảo

Ang, D. D. and Williams, M. L., “Combined Stresses in an Orthotropic Plate Having a Finite Crack,” Journal of Applied Mechanics, vol. 28, 1961, pp. 372–378. Sechler, E. E. and Williams, M. L., “The Critical Crack Length in Pressurized, Monocoque Cylinders,” Final Report on Contract NAw-6525, California Institute of Technology, September 1959. Reissner, E., “On Some Problems in Shell Theory,” Structural Mechanics, Proceedings of the First Symposium on Naval Structural Mechanics, Pergamon Press, 1960, pp. 74–113. Reissner, E., “A Note on Membrane and Bending Stresses in Spherical Shells,” J. Soc. Industr. Appl. Math., vol. 4, 1956, pp. 230–240. Folias, Efthymios S. , “The Stresses in a Cracked Spherical Shell,” (Submitted to the Journal of Mathematics and Physics, 1964). Folias, Efthymios S., “The Stresses in a Spherical Shell Containing a Crack,” ARL 64-23, Aerospace Research Laboratories, Office of Aerospace Research, U. S. Air Force, January 1964. Knowles, J. K. and Wang, N. M., “On the Bending of an Elastic Plate Containing a Crack,” Journal of Mathematics and Physics, vol. 39, 1960, pp. 223–236. Williams, M. L., “The Bending Stress Distribution at the Base of a Stationary Crack,” Journal of Applied Mechanics, vol. 28, Trans. ASME, vol. 83, Series E, 1961, pp. 78–82. Williams, M. L., “On the Stress Distribution at the Base of a Stationary Crack,” Journal of Applied Mechanics, vol. 24, March 1957, pp. 109–114. Reissner, E., “Stresses and Small Displacements of Shallow Spherical Shells I, II,” Journal of Mathematics and Physics, vol. 25, 1946, pp. 80–85, 279–300. Griffith, A. A., “The Theory of Rupture,” Proceedings of the First International Congress of Applied Mechanics, Delft, 1924, pp. 55–63. Swedlow, J. L., “On Griffith's Theory of Fracture,” GALCIT SM 63-8, California Institute of Technology, March 1963. Parmerter, R. R., “The Buckling of Clamped Shallow Spherical Shells Under Uniform Pressure,” Ph. D. Dissertation, California Institute of Technology, September 1963. 1 Mikhlin, S. G., Integral Equations, English translation by A. H. Armstrong, published by Pergamon Press, 1957.