Custom fabrication of a composite hemi‐knee joint based on rapid prototyping

Bardos, D.I. (1990), “Titanium and titanium alloys”, in Williams, D. (Ed.), Concise Encyclopedia of Medical and Dental Materials, Pergamon Press, Oxford, pp. 360‐5. Boyan, B.D., Hummert, T.W., Dean, D.D. and Schwartz, Z. (1996), “Role of material surfaces in regulating bone and cartilage cell response”, Biomaterials, Vol. 17 No. 2, pp. 137‐46. Chang, B.S., Lee, C.K., Hong, K.S., Youn, H.J., Ryu, H.S., Chung, S.S. and Park, K.W. (2000), “Osteoconduction at porous hydroxyapatite with various pore configurations”, Biomaterials, Vol. 21 No. 12, pp. 1291‐8. Chen, Z., Li, D., Lu, B., Tang, Y., Sun, M. and Wang, Z. (2005a), “Fabrication of artificial bioactive bone using rapid”, Rapid Prototyping Journal, Vol. 10 No. 5, pp. 327‐33. Chen, Z., Li, D., Lu, B., Tang, Y., Sun, M. and Xu, S. (2005b), “Fabrication of osteo‐structure analogous scaffolds via fused deposition modeling”, Scripta Materialia, Vol. 52, pp. 157‐61. Cohen, M. and Letelier, J.L.C. (2003), “Clinical applications of stereolithography in ear surgery”, Otolaryngol. Head Neck Surg., Vol. 129, p. 225. Cyster, L.A., Grant, D.M., Howdle, S.M., Rose, F.R., Irvine, D.J., Freeman, D., Scotchford, C.A. and Shakesheff, K.M. (2005), “The influence of dispersant concentration on the pore morphology of hydroxyapatite ceramics for bone tissue engineering”, Biomaterials, Vol. 26 No. 7, pp. 697‐702. de Groot, K., de Putter, C., Smitt, P. and Driessen, A. (1981), “Mechanical failure of artificial teeth made of dense calcium hydroxyapatite”, Sci Ceram., Vol. 11, pp. 433‐7. Dempsey, A.J., Finlay, J.B., Bourne, R.B., Rorabeck, C.H., Scott, M.A. and Millman, J.C. (1989), “Stability and anchorage considerations for cementless tibial components”, J. Arthroplasty, Vol. 4, pp. 223‐30. Dore, S., Bobyn, J.D. and Drouin, G. (1984), “Use of computerized tomography and numerical control machining for the fabrication of custom arthroplasty prostheses”, Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium, Vol. 7, pp. 233‐8. Einhorn, T.A. (1995), “Enhancement of fracture‐healing”, J. Bone Joint Surg. Am., Vol. 77, pp. 940‐56. Geesink, R.G.T., de Groot, K. and Klein, C.P. (1988), “Bonding of bone to apatite‐coated implants”, J. Bone Joint Surg., Vol. 70B, pp. 17‐22. Hollister, S.J., Maddox, R.D. and Taboas, J.M. (2002), “Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints”, Biomaterials, Vol. 23, pp. 4095‐103. Hutmacher, D.W. (2000), “Scaffolds in tissue engineering bone and cartilage”, Biomaterials, Vol. 21, pp. 2529‐43. Hutmacher, D.W., Sittinger, M. and Risbud, M.V. (2004), “Scaffold‐based tissue engineering: rational for computer‐aided design and solid free‐form fabrication systems”, Trends Biotechnol., Vol. 22 No. 7, pp. 354‐62. Kienapfel, H., Sumner, D.R., Turner, T.M., Urban, R.M. and Galante, J.O. (1992), “Efficacy of autograft and freeze‐dried allograft to enhance fixation of porous coated implants in the presence of interface gaps”, Journal of Orthopaedic Research, Vol. 10 No. 3, pp. 423‐33. Lee, M., Dunn, J.C.Y. and Wu, B.M. (2005), “Scaffold fabrication by indirect three‐dimensional printing”, Biomater., Vol. 26, pp. 4281‐9. Lemons, J., Niemann, K.M.W. and Wiess, A.B. (1976), “Biocompatibility studies on surgical grade titanium‐cobalt‐ and iron‐based alloys”, J. Bioined. Muter. Res., Vol. 7, pp. 549‐53. Lin, C.Y. et al., (2004), “A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity”, J. Biomech., Vol. 37, pp. 623‐36. Lin, Y., Wang, C. and Dai, K. (2005), “Reverse engineering in CAD model reconstruction of customized artificial joint”, Medical Engineering & Physics, Vol. 27, pp. 189‐93. Li, X., Li, D., Lu, B. and Tang, Y. (2005), “Design and fabrication of CAP scaffolds by indirect solid free form fabrication”, Rapid Prototyping Journal, Vol. 11 No. 5, pp. 312‐8. Liu, F., Li, D. and Lu, B. et al., (2003a), “Rapid fabrication of customized artificial human joint”, Zhongguo Jixie Gongcheng/China Mechanical Engineering, Vol. 14 No. 16, pp. 14‐22. Liu, Y., Li, D., Lu, B., He, S. and Li, G. (2003b), “The customized mandible substitute based on rapid prototyping”, Rapid Prototyping Journal, Vol. 9 No. 3, pp. 167‐74. Lu, J.X., Flautre, B., Anselme, K., Hardouin, P., Gallur, A., Descamps, M. and Thierry, B. (1999), “Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo”, J. Mater. Sci. Mater. Med., Vol. 10 No. 2, pp. 111‐20. Lv, H.S. (2001), Artificial Joint Surgery, Science Press, Beijing, p. 268. O'Brien, F.J., Harley, B.A., Yannas, I.V. and Gibson, L.J. (2005), “The effect of pore size on cell adhesion in collagen‐GAG scaffolds”, Biomaterials, Vol. 26, pp. 433‐41. Ogose, A., Hotta, T., Hatano, H., Kawashima, H., Tokunaga, K., Endo, N. and Umezu, H. (2002), “Histological examination of beta‐tricalcium phosphate graft in human femur”, J. Biomed. Mater. Res., Vol. 63, pp. 601‐4. Ryd, L., Lindstrand, A., Stenstrôm, A. and Selvik, G. (1990), “Porous coated anatomic tricompartmental tibial components: the relationship between prosthetic position and micromotion”, Clin. Orthop., Vol. 251, pp. 189‐97. Singare, S., Li, D., Lu, B., Guo, Z. and Liu, Y. (2005), “Customized design and manufacturing of chin implant based on rapid prototyping”, Rapid Prototyping Journal, Vol. 11 No. 2, pp. 113‐8. Solar, R.J., Pollack, S.R. and Korostoff, E. (1979), “In vitro corrosion testing of titanium surgical implant alloys: an approach to understand titanium release from implants”, J. Biomed. Muter. Res., Vol. 13, pp. 217‐50. Stephenson, P.K., Freeman, M.A., Revell, R.A., Germain, J., Tuke, M. and Pirie, C.J. (1991), “The effect of hydroxyapatite coating on ingrowth of bone into cavities in an implant”, J. Arthroplasty, Vol. 6, pp. 51‐8. Sun, W., Darling, A., Starly, B. and Nam, J. (2004a), “Computer aided tissue engineering: overview, scope and challenges”, J Biotechnol Appl Biochem., Vol. 39 No. 1, pp. 29‐47. Sun, W., Starly, B., Darling, A. and Gomez, C. (2004b), “Computer‐aided tissue engineering: application to biomimetic modelling and design of tissue scaffolds”, Biotechnol. Appl. Biochem., Vol. 39, pp. 49‐58. Tarr, R.R., Clarke, I.C., Gruen, T.A. and Sarmiento, A. (1983), “Comparison of loading behavior of femoral stems of Ti6A14V and cobalt chromium alloys: a three dimensional finite element analysis”, in Luckey, H.A. and FredKubli, Jr (Eds), Titanium Alloys in Surgical Implants, American Society for Testing and Materials, Philadelphia, PA, pp. 88‐101. Van Tienen, T.G., Heijkants, R.G.J.C., Buma, P., de Groot, J.H., Pennings, A.J. and Veth, R.P.H. (2002), “Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes”, Biomaterials, Vol. 23, pp. 1731‐8. Vladimir, M., Thomas, B. and Thomas, T. et al., (2003), “Organ printing: computer‐aided jet‐based 3D tissue engineering”, TRENDS in Biotechnology, Vol. 21 No. 4, pp. 157‐61. Vrielinck, L. et al., (2003), “Image‐based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow‐up study”, Int. J. Oral Maxillofac. Surg., Vol. 32, pp. 7‐14. Wilson, C.E., de Bruijn, J.D., van Blitterswijk, C.A., Verbout, A.J. and Dhert, W.J. (2004), “Design and fabrication of standardized hydroxyapatite scaffolds with a defined macroarchitecture by rapid prototyping for bone‐tissue‐engineering research”, J. Biomed. Mater. Res., Vol. 68A, pp. 123‐32. Xu, T., Jin, J. and Gregory, C. et al., (2005), “Inkjet printing of viable mammalian cells”, Biomaterials, Vol. 26, pp. 93‐9. Yoshikawa, T., Ohgushi, H. and Tamai, S. (1996), “Immediate bone forming capability of prefabricated osteogenic hydroxyapatite”, J. Biomed. Mater. Res., Vol. 32 No. 3, pp. 481‐92. Zhang, H., Li, D., Sun, M., Wang, Z. and Lu, F. (2003), “Design and rapid fabrication of custom‐made unilateral knee joint prosthesis”, Beijing Shengwu Yixue Gongcheng/Beijing Biomedical Engineering, Vol. 22 No. 4, pp. 266‐9. Zhang, Z., Wang, Z., Liu, S. and Kodama, M. (2004), “Pore size, tissue ingrowth, and endotheliatization of small‐diameter microporous polyurethane vascular prostheses”, Biomaterials, Vol. 25, pp. 177‐87. Zheng, S., Zhao, W. and Lu, B. (2005), “3D reconstruction of the structure of a residual limb for customizing the design of a prosthetic socket”, Medical Engineering & Physics, Vol. 27, pp. 67‐74. Singare, S., Li, D., Lu, B., Liu, Y., Gong, Z. and Liu, Y. (2004), “Design and fabrication of custom mandible titanium tray based on rapid prototyping”, Medical Engineering & Physics, Vol. 26, pp. 671‐6.