Well-Dispersed Cu2ZnSnS4 Nanocrystals Synthesized from Alcohols and Their Applications for Polymer Photovoltaics
Tóm tắt
In this work, we report on a simple non-injection synthesis routine for the preparation of well-dispersed monocrystalline Cu2ZnSnS4 (CZTS) nanoparticles (NPs). The nanocrystal morphology was investigated by scanning and transmission electron microscopy, and its phase composition was studied by X-ray diffraction and Raman analyses. Cu2ZnSnS4 nanoparticles prepared using ethanolamine and diethanolamine as chemical stabilizers showed a high purity and a suitable size for polymer solar cell applications. The fabricated CZTS NPs are shown to be easily dispersed in a polymer/fullerene aromatic solution as well as the hybrid photovoltaic active layer. Thanks to the increment in the light absorption and electrical conductivity of the active layer, solar cells with a small amount of CZTS nanoparticles resulted in a clear enhancement of the photovoltaic performance. The short-circuit current density is increased from 9.90 up to 10.67 mA/cm2, corresponding to an improvement in the power conversion efficiency (PCE) from 3.30 to 3.65%.
Tài liệu tham khảo
Zhou X, Fan X, Sun X, Zhang Y, Zhu Z (2015) Enhanced efficiency of inverted polymer solar cells by using solution-processed TiO x /CsO x cathode buffer layer. Nanoscale Res Lett 10:1–8
Wu F, Ye F, Chen Z, Cui Y, Yang D, Li Z, Zhao X, Yang X (2015) Morphology construction of vertical phase separation for large-area polymer solar cells. Org Electron 26:48–54
Gaynor W, Lee JY, Peumans P (2010) Fully solution-processed inverted polymer solar cells with laminated nanowire electrodes. Acs Nano 4:30–34
Chen J, Cui C, Li Y, Zhou L, Ou Q, Li C, Li Y, Tang J (2015) Single-junction polymer solar cells exceeding 10% power conversion efficiency. Adv Mater 27:1035–1041
Liu Y, Zhao J, Li Z, Mu C, Ma W, Hu H, Jiang K, Lin H, Ade H, Yan H (2014) Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nat Commun 5:5293
Zhao W, Qian D, Zhang S, Li S, Inganäs O, Gao F, Hou J (2016) Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability. Adv Mater 28:4734–4739
Srinivasan MV, Tsuda N, Shin P, Ochiai S (2015) Performance evaluation of PTB7:PC71BM based organic solar cells fabricated by spray coating method using chlorine free solvent. Rsc Adv 5:56262–56269
Zhao X, Cheng J (2016) Atmospheric preparation of ZnO thin films by mist chemical vapor deposition for spray-coated organic solar cells. J Mater Sci-Mater El 27:2676–2681
Clarke TM, Durrant JR (2012) Charge photogeneration in organic solar cells. Chem Rev 110:6736–6767
Li G, Zhu R, Yang Y (2012) Polymer solar cells. Nat Photonics 6:153–161.
Mbule PS, Kim TH, Kim BS, Swart HC, Ntwaeaborwa OM (2013) Effects of particle morphology of ZnO buffer layer on the performance of organic solar cell devices. Sol Energ Mat Sol C 112:6–12
Sekine N, Chou C, Kwan WL, Yang Y (2009) ZnO nano-ridge structure and its application in inverted polymer solar cell. Org Electron 10:1473–1477
Liang Z, Zhang Q, Wiranwetchayan O, Xi J, Yang Z, Park K, Li C, Cao G (2012) Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells. Adv Fun Mater 22:2194–2201
Luszczynska B, Szymanski MZ, Verilhac JM, Reiss P, Djurado D (2013) Improved external quantum efficiency of solution-processed P3HT:60PCBM photodetectors by the addition of Cu–In–Se nanocrystals. Org Electron 14:3206–3212
Lefrançois A, Luszczynska B, Pepindonat B, Lombard C, Bouthinon B, Verilhac JM, Gromova M, Faurevincent J, Pouget S, Chandezon F, Sadki S, Reiss P (2015) Enhanced charge separation in ternary P3HT/PCBM/CuInS2 nanocrystals hybrid solar cells. Sci Rep 5:7768
Luan W, Zhang C, Luo L, Yuan B, Jin L, Kim YS (2016) Enhancement of the photoelectric performance in inverted bulk heterojunction solid solar cell with inorganic nanocrystals. Appl Energ article in press
Zhang R, Szczepaniak SM, Carter NJ, Handwerker CA, Agrawal R (2015) A versatile solution route to efficient Cu2ZnSn(S, Se)4 thin film solar cells. Chem Mater 27:2114–2120
Zhou H, Hsu WC, Duan HS, Bob B, Yang W, Song TB, Hsu CJ, Yang Y (2013) CZTS nanocrystals: a promising approach for next generation thin film photovoltaics. Energ Environ Sci 6:2822–2838
Cheng J, Hu R, Wang Q, Zhang C, Xie Z, Long Z, Yang X, Li L (2015) Substrate temperature effect on charge transport performance of ZnO electron transport layer prepared by a facile ultrasonic spray pyrolysis in polymer solar cells. Int J Photoenergy 2015:1–8
Cheng J, Wang Q, Zhang C, Yang X, Hu R, Huang J, Yu J, Li L (2016) Low-temperature preparation of ZnO thin film by atmospheric mist chemistry vapor deposition for flexible organic solar cells. J Mater Sci-Mater El 27:7004–7009
Gao Y, Yang H, Zhang Y, Li J, Zhao H, Feng J, Sun J, Zhi Z (2014) Facile non-injection synthesis of high quality CZTS nanocrystals. Rsc Adv 4:17667–17670
Luo L, Luan W, Yuan B, Zhang C, Jin L (2015) High efficient and stable solid solar cell: based on FeS2 nanocrystals and P3HT: PCBM. Energy Procedia 75:2181–2186
Wang W, Winkler MT, Gunawan O, Gokmen T, Todorov TK, Zhu Y, Mitzi DB (2014) Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency. Adv Energy Mater 4:403–410
Chen S, Manders JR, Tsang S, So F (2012) Metal oxides for interface engineering in polymer solar cells. J Mater Chem 22:24202–24212
Geethu R, Kartha CS, Vijayakumar KP (2015) Improving the performance of ITO/ZnO/P3HT:PCBM/Ag solar cells by tuning the surface roughness of sprayed ZnO. Sol Energy 120:65–71
Huang YC, Liao YC, Li SS, Wu MC, Chen CW, Su WF (2009) Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy. Sol Energ Mat Sol C 93:888–892
Fang Y, Hou Y, Hu Y, Teng F (2015) Transient photocurrent response of plasmon-enhanced polymer solar cells with gold nanoparticles. Mater Lett 8:4050–4060