Ball shear versus ball pull test methods for evaluating interfacial failures in area array packages

R.J. Coyle1, A.J. Serafino1, P.P. Solan2
1Lucent Technologies, Bell Laboratories Innovations, Holmdel, NJ, USA
2Andrew Corporation, Warren, NJ, USA

Tóm tắt

In this investigation, a ball pull (tensile) test is investigated as an alternative to the ball shear test for evaluating the solder joint integrity of area array packages. The relative effectiveness of the pull and shear methods is compared using BGA packages with documented susceptibility to brittle interfacial failure during accelerated temperature cycling tests or isothermal aging. Accelerated temperature cycling is used typically to measure long term solder joint attachment reliability in various use environments and isothermal aging is used to measure susceptibility to degradation following high temperature storage. The shear and pull tests are conducted on packages in the as received condition and after thermal preconditioning. Metallographic failure analysis and scanning electron microscopy with energy dispersive X-ray analyses are used to characterize the solder joints and fracture modes. The ball shear and ball pull results are compared and discussed in terms of the ability to predict susceptibility to interfacial failures in area array packages.

Từ khóa

#Testing #Packaging #Soldering #Temperature #Accelerated aging #Isothermal processes #Failure analysis #Life estimation #Thermal degradation #Thermal conductivity

Tài liệu tham khảo

guenther, 1999, Goldwire Bondable and Solderable Surfaces, Proc IPC Printed Circuits Expo 1999, 13 cordes, 1998, Electroless Nickel-Gold: Is There a Future?, Future Circuits International, 131 10.1109/ECTC.2001.927950 0, Ball Pull Test Module BPTM-2K-13124 Royce Instruments Napa CA sykes, 0, Cold Bump Pull for BGA and Miniature BGA Packages, Dage Technical Informer Dage Precision Industries Ltd England 10.1109/ECTC.2000.853140 10.1108/09540919910254930 coyle, 2001, unpublished research Lucent Technologies Bell Laboratories Princeton NJ 10.1109/ECTC.2001.927984 10.1109/IEMT.1999.804792 lee, 2000, Assessment on the Effect of Electroless Nickel Plating on the Reliability of Solder Ball Attachment to the Bond Pads of PBGA Substrate, Proceedings of the 50th ECTC 868– jang, 2000, Comparison of Electroplated Eutectic SnIBi and Pb/Sn Solder Bumps on Various UBM Systems, Proc 50th ECTC, 64 lee, 1998, Ball Attachment Evaluation for Tape Ball Grid Array Packages, Proc Surface Mount International 1998, 46 cho, 2000, Under Bump Metallurgies for a Wafer Level CSP with Eutectic Pb-Sn Solder Ball, Proc 50th ECTC, 844 mawer, 1995, BGA Solder Ball Strength, Proceedings of the 6th Annual Electronics Packaging Symposium SUNY Binghamton 10.1109/IEMT.1998.731089 10.1109/IEMT.1997.626868 johnson, 1999, Acceptability and Monitoring Tests for Electroless Finish Quality on Laminate Substrates, Proc SemiCon W 1999, 1 erich, 1998, Development and Implementation of Shear Testing for Surface Mount Area Array Technology, Suny-Binghamton robert, 1999, Shear Testing and Failure Mode Analysis for Evaluation of BGA Ball Attachment, Proceedings of 24th IEMT, 16 gordon foster, 1962, Embrittlement of Solder by Gold from Plated Surfaces, ASTM STP 319, 13 lau, 1997, Failure Analysis, Solder Joint Reliability of BGA CSP Flip Chip and Fine Pitch SMT Assemblies, 47 10.1016/S0026-2692(96)90018-X wenger, 2000, Case Studies of Brittle Interfacial Failures in Area Array Solder Interconnects, Proceedings of the 26th International Symposium for Testing and Failure Analysis, 355 1991, Test Methods for Destructive Shear Testing of Ball Bonds, 1991 Annual Book of ASTM Standards, 10 2000, Test Method for BGA Ball Shear, JEDEC 14 1 Test Methods Subcommittee JEDEC Solid State Technology Association 10.1007/978-1-4615-3910-0_17 charles, 1986, Ball Bond Shear Testing: An Interlaboratory Comparison, Proceedings of the International Microelectronics Symposium 265–274 tomita, 2000, Advanced Surface Plating on the Organic FC-BGA Package, Proc 50th ECTC, 861 10.1109/ECTC.2000.853114 10.1109/IEMT.2000.910726 kang, 2000, The Solder Joint and Runner Metal Reliability of Wafer-Level CSP (Omega-CSP), Proc 50th ECTC, 87 10.1109/ECTC.2001.927949 10.1109/ECTC.1999.776160 houghton, 2001, Results of BGA tensile Testing with Alternative Surface Finishes, IPC SMEMA Council APEX 2001, 8 cullen, 1998, Overview and Resolution of Electroless Nickel Immersion Gold Failure Modes, Proc IPC Printed Circuits Expo 1998, 18 biunno, 1999, A Root Cause Failure Mechanism for Solder Joint Integrity of Electroless Nickel/Immersion Gold Surface Finishes, Proc IPC Printed Circuits Expo 1999, 18 ghaffarian, 1998, Effects of Board Finish on Failure Mechanisms and Reliability of BGAs, Proc Surface Mount International 1998, 59 mei, 1997, Interfacial Fracture Mechanism of BGA Packages on Electroless Ni/Au, Proc 1997 ASME INTERPack '97 - Advances in Electronic Packaging, 2, 1543 houghton, 1998, Alternative Metallic Surface Finishes an Update on the ITRI/October Project, Proc IPC Printed Circuits Expo 1998, 14 mei, 1998, Brittle Interfacial Fracture of PBGA Packages on Electroless Ni/Immersion Au, Proc 48th Electronic Components Technology Conf, 952 cullen, 2000, A Study on Interfacial Fracture Phenomenon of Solder Joints Formed using the Electroless Nickel/Immersion Gold Surface Finish, Proc IPC Works 2000, 3 jao, 2000, Study of a New Structured Leadframe Based CSP, mini-LOC, Proceedings of the 50th HCTC, 364 10.1109/ECTC.1990.122215 bradley, 1996, Effect of Thermal Aging on the Microstructure and Reliability of Ball Grid Array (BGA) Solder Joints, Proceedings of Surface Mount Intemational 1996 95–106