Experimental verification of a technique for the real-time identification of induction motors based on the recursive least-squares
7th International Workshop on Advanced Motion Control. Proceedings (Cat. No.02TH8623) - Trang 326-334
Tóm tắt
This paper presents the experimental application of a technique for the real-time identification of induction motors whose theoretical and numerical analysis had already been faced up to by the authors in previous works. The presented identification technique, based on least-squares, reveals itself suitable to be applied to induction motors both supplied by the electrical grid and as a part of a high performance electrical drive with any control system, and thus with any supply condition. The paper shows that the estimation of the electrical parameters of the motor can be performed by unconstrained minimisation, indirectly taking in to consideration the constraints which inevitably arise when the well-known stator and rotor voltage equations are rearranged so as to allow the application of the least-squares method. Then it shows the assumptions under which this technique is valid as well as the identifiability criteria both for transient and steady-state conditions. However the totally innovative part of this work is the presentation of the experimental results of the presented methodology as well as the description of the test bench suitably built for this purpose. The experimental results obtained by the implementation of the identification technique on a DSP confirm the theoretical and numerical results already obtained.
Từ khóa
#Induction motors #Numerical analysis #Control systems #Minimization methods #Stators #Rotors #Voltage #Equations #Steady-state #TestingTài liệu tham khảo
boussak, 1989, Contribution à la Modélisation Entrée-Sortie et à l'Identification Paramétrique des Machines à Induction, Thèse de Doctorat de l'Université de Paris 6
10.1109/28.293725
ribeiro, 2000, Real-Time Estimation of the Electrical Parameters of an Induction Machine Using Sinusoidal PWM Voltage Waveforms, IEEE Transactions on Industry Applications, 36
moons, 1995, Parameter identification of induction motor drives, Automatica, 31, 10.1016/0005-1098(95)00016-P
cirrincione, 2000, Identification of an Induction Motor with the Least-Squares Method, Electrical Engineering Research Report Report
cirrincione, 2000, A Rotor-Flux-Oriented Vector Control of an AC Drive based on a Recursive Least-Squares (RLS) Method, Electrical Engineering Research Report
pucci, 2000, A Recursive Least-Squares Method for real-time Parameter Estimation in Adjustable-Speed Induction Motor Drives, Electrical Engineering Research Report Report
pucci, 0, Estimation of the Electrical of an Induction Motor in Saturated and Unsaturated Conditions by use of the Least-Squares Method, IEEE ACEMP 2001
cirrincione, 0, A Direct-Torque-Control of an AC Drive Based on a Recursive-Least-Squares (RLS) Method, Proc IEEE SDEMPED 2001
pucci, 2001, Novel Numerical Techniques for the Identification of Induction Motors for the Control of AC Drives: Simulations and Experimental Implementations
10.1109/41.238018
10.1109/28.273627
stasi, 1999, Comparison Between Adaptive Flux Observer – and Extended Kalman Filter – Based Algorithms for Field Oriented Control of Induction Motor Drives, EPE
aquila, 0, Kalman Filter Estimators Applied to Robust Control of Induction Motor Drives, IECON 98
vas, 1996, Parameter Estimation and Condition Monitoring
heinemann, 1992, Seibsteinstellende, feldorientierte Regelung für einen asynchronen Drehstromantrieb, Dissertation TU Braunschweig
leonhard, 1997, Control of Electrical Drives
vas, 1994, Vector Control Of AC Drives, A Space-Vector Approach
capolino, 1990, Induction Machine parameters identification: Comparison of different algorithms, International Conference on Electrical Machines, 940
cirrincione, 0, Estimation of the Electrical Parameters of an Induction motor with the TLS EXIN Neuron, IEEE ICC 2002
10.1109/IAS.2002.1042707
cirrincione, 0, Robustness of the Least-Squares-Method for the Estimation of the Electrical Parameters of an Induction Motor, ICEM 2002