An Autonomous Robot for Harvesting Cucumbers in Greenhouses
Tóm tắt
This paper describes the concept of an autonomous robot for harvesting cucumbers in greenhouses. A description is given of the working environment of the robot and the logistics of harvesting. It is stated that for a 2 ha Dutch nursery, 4 harvesting robots and one docking station are needed during the peak season. Based on these preliminaries, the design specifications of the harvest robot are defined. The main requirement is that a single harvest operation may take at most 10 s. Then, the paper focuses on the individual hardware and software components of the robot. These include, the autonomous vehicle, the manipulator, the end-effector, the two computer vision systems for detection and 3D imaging of the fruit and the environment and, finally, a control scheme that generates collision-free motions for the manipulator during harvesting. The manipulator has seven degrees-of-freedom (DOF). This is sufficient for the harvesting task. The end-effector is designed such that it handles the soft fruit without loss of quality. The thermal cutting device included in the end-effector prevents the spreading of viruses through the greenhouse. The computer vision system is able to detect more than 95% of the cucumbers in a greenhouse. Using geometric models the ripeness of the cucumbers is determined. A motion planner based on the A*-search algorithm assures collision-free eye-hand co-ordination. In autumn 2001 system integration took place and the harvesting robot was tested in a greenhouse. With a success rate of 80%, field tests confirmed the ability of the robot to pick cucumbers without human interference. On average the robot needed 45 s to pick one cucumber. Future research focuses on hardware and software solutions to improve the picking speed and accuracy of the eye-hand co-ordination of the robot.
Tài liệu tham khảo
Anonymous, 2000. Land en tuinbouwcijfers 2000 [in Dutch]. LEI/CBS, 's Gravenhage, The Netherlands.
Arima, S. and Kondo, N. 1999. Cucumber harvesting robot and plant training system. Journal of Robotics and Mechatronics, 11(3):208-212.
Boyse, J.W. 1979. Interference detection among solids and surfaces. Communications of the ACM, 22(1):3-9.
Craig, J.J. 1989. Introduction to Robotics, Addison-Wesley, Reading: Mass., USA.
Edan, Y. 1995. Design of an autonomous agricultural robot. Applied Intelligence, 5:41-50.
Gieling, Th.H., Van Henten, E.J., Van Os, E.A., Sakaue, O., and Hendrix, A.T.M. 1996. Conditions, demands and technology for automatic harvesting of fruit vegetables. Acta Horticulturae, 440: 360-365.
Hayashi, S. and Sakaue, O. 1996. Tomato harvesting by robotic system. ASAE Annual International Meeting, Phoenix, Arizona, USA, Paper 963067.
Heikkilä, J. and Silvén, O. 1997. A four-step camera calibration procedure with implicit image correction. In Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'97), San Juan, Puerto Rico, pp. 1106-1112.
Hemming, J. and Van Der Meij, M.J. 2000. Het visionsysteem van een oogstrobot. IMAG,Wageningen, The Netherlands, IMAG Report V 2001-12.
Hendrix, A.T.M. 1993. Taaktijden voor de groenteteelt onder glas [in Dutch]. IMAG, Wageningen, The Netherlands, IMAG Report 93-14.
Herman, M. 1986. Fast, three-dimensional, collision-free motion planning. In Proceedings of the IEEE International Conference on Robotics and Automation, San Fransisco, California, USA, pp. 1056-1063.
Hwang, Y.K. and Ahuja, N. 1992. Gross motion planning—a survey. ACM Computing Surveys, 24(3):219-291.
Kondo, K. 1991. Motion planning with six degrees of freedom by multistrategic bidirectional heuristic free-space enumeration. IEEE Transactions on Robotics and Automation, 7(3):267-277.
Kondo, N., Monta, M., and Fujiura, T. 1996. Fruit harvesting robots in Japan. Advances in Space Research, 18(1/2):181-184.
Kornet, J.G. and Meuleman, J. 1999. Werkwijze en inrichting voor het detecteren van waterrijke objecten [in Dutch]. Patent number 1013780.
Langers, R.A. 1998a. Modelstructuren voor het schatten van het volume c.q. gewicht van komkommers met computer vision [in Dutch]. IMAG,Wageningen, The Netherlands, IMAGReport P98-25.
Langers, R.A. 1998b. Reconstructie van volume en gewicht van komkommers met behulp van de distance transform [in Dutch]. IMAG, Wageningen, The Netherlands, IMAG Report P98-38.
Latombe, J.C. 1991. Robot Motion Planning, Kluwer Academic Publishers: Boston, USA.
Lin, M.C. and Gottschalk, S. 1998. Collision detection between geometric models: A survey. In Proceedings 8th IMA Conference on the Mathematics of Surfaces, Winchester, UK, pp. 1-20.
Meuleman, J., Van Heulen, S.F., Kornet, J.G., and Peters, D.G. 2000. Image analysis for robot harvesting of cucumbers. EurAgEng 2000, The European Conference of Agricultural Engineers, Warwick, UK, Paper No. 00-AE-003.
Pearl, J. 1984. Heuristics: Intelligent Search Strategies for Computer Problem Solving, Addision-Wesley: Reading, Mass., USA.
Russell, S. and Norvig, P. 1995. Artificial Intelligence: A Modern Approach, Prentice Hall: Englewood Cliffs, New Jersey, USA.
Schenk, E.J. 2000. Modelvorming, voorwaartse kinematica, inverse kinematica met botsingsdetectie en padplanning van een 7 DOF manipulator systeem voor het automatisch oogsten van komkommers [in Dutch]. IMAG, Wageningen, The Netherlands, IMAG Report V 2000-77.
Sévilla, F., Balerin, S., and Thompson, P. 1992. Control of an agricultural robotic arm based on a mobile platform. AG Eng 92, Agricultural Engineering International Conference, Uppsala, Sweden.
Tillet, N.D. 1993. Robotic manipulators in horticulture: A review. Journal of Agricultural Engineering Research, 55:89-105.
Van Dijk, G. 1999. Modelvorming en padplanning van een 6 DOF manipulator voor het oogsten van komkommers [in Dutch]. IMAG, Wageningen, The Netherlands, IMAG Report V99-04.
Van Kollenburg-Crisan, L.M., Sjwed, D.A., Wennekes, P.C., and Kornet, J.G. 1999. Method and Device for Cutting the Stalks of Fruits. Patent number 1008161.
Van Kollenburg-Crisan, L.M., Wennekes, P., and Werkhoven, C. 1997. Development of a mechatronic system for automatic harvesting of cucumbers. In Proceedings of BIO-ROBOTICS 97, The International Workshop on Robotics and Automated Machinery for Bio-Productions, Valencia, Spain, pp. 143-148.
Zhang, Z.Y. 1999. Flexible camera calibration by viewing a plane from unknown orientations. In Proceedings of the 7th IEEE Conference on Computer Vision, ICCV99, Kerkyra, Greece, pp. 666-673.