Neural network-based adaptive sliding mode control for underactuated dual overhead cranes suffering from matched and unmatched disturbances
Tóm tắt
To improve transportation capacity, dual overhead crane systems (DOCSs) are playing an increasingly important role in the transportation of large/heavy cargos and containers. Unfortunately, when trying to deal with the control problem, current methods fail to fully consider such factors as external disturbances, input dead zones, parameter uncertainties, and other unmodeled dynamics that DOCSs usually suffer from. As a result, dramatic degradation is caused in the control performance, which badly hinders the practical applications of DOCSs. Motivated by this fact, this paper designs a neural network-based adaptive sliding mode control (SMC) method for DOCS to solve the aforementioned issues, which achieves satisfactory control performance for both actuated and underactuated state variables, even in the presence of matched and mismatched disturbances. The asymptotic stability of the desired equilibrium point is proved with rigorous Lyapunov-based analysis. Finally, extensive hardware experimental results are collected to verify the efficiency and robustness of the proposed method.
Tài liệu tham khảo
K.L. Sorensen, W.E. Singhose, Command-induced vibration analysis using input shaping principles. Automatica 44(9), 2392–2397 (2008)
X. Zhang, Y. Fang, N. Sun, Minimum-time trajectory planning for underactuated overhead crane systems with state and control constraints. IEEE Trans. Ind. Electron. 61(12), 6915–6925 (2014)
U. Schaper, C. Dittrich, E. Arnold, K. Schneider, O. Sawodny, 2-DOF skew control of boom cranes including state estimation and reference trajectory generation. Control Eng. Pract. 33, 63–75 (2014)
H. Peng, B. Shi, X. Wang, C. Li, Interval estimation and optimization for motion trajectory of overhead crane under uncertainty. Nonlinear Dyn. 96(2), 1693–1715 (2019)
Y. Fang, B. Ma, P. Wang, X. Zhang, A motion planning-based adaptive control method for an underactuated crane system. IEEE Trans. Control Syst. Technol. 20(1), 241–248 (2012)
F. Boustany, B. d’Andrea Novel, Adaptive control of an overhead crane using dynamic feedback linearization and estimation design, in Proceedings 1992 IEEE International Conference on Robotics and Automation (IEEE, Los Alamitos, 1992), pp. 1963–1964
D. Liu, J. Yi, D. Zhao, W. Wang, Adaptive sliding mode fuzzy control for a two-dimensional overhead crane. Mechatronics 15(5), 505–522 (2005)
N.B. Almutairi, M. Zribi, Sliding mode control of a three-dimensional overhead crane. J. Vib. Control 15(11), 1679–1730 (2009)
S.G. Lee, L.C. Nho, D.H. Kim et al., Model reference adaptive sliding mode control for three dimensional overhead cranes. Int. J. Precis. Eng. Manuf. 14(8), 1329–1338 (2013)
W. Chen, M. Saif, Output feedback controller design for a class of mimo nonlinear systems using high-order sliding-mode differentiators with application to a laboratory 3-D crane. IEEE Trans. Ind. Electron. 55(11), 3985–3997 (2008)
X. Wu, K. Xu, M. Lei, X. He, Disturbance-compensation-based continuous sliding mode control for overhead cranes with disturbances. IEEE Trans. Autom. Sci. Eng. 17(4), 2182–2189 (2020)
B. Lu, Y. Fang, N. Sun, Continuous sliding mode control strategy for a class of nonlinear underactuated systems. IEEE Trans. Autom. Control 63(10), 3471–3478 (2018)
Y. Fang, W.E. Dixon, D.M. Dawson, E. Zergeroglu, Nonlinear coupling control laws for an underactuated overhead crane system. IEEE/ASME Trans. Mechatron. 8(3), 418–423 (2003)
N. Sun, Y. Fang, New energy analytical results for the regulation of underactuated overhead cranes: an end-effector motion-based approach. IEEE Trans. Ind. Electron. 59(12), 4723–4734 (2012)
N.Q. Hoang, S.G. Lee, Energy-based approach for controller design of overhead cranes: a comparative study. Appl. Mech. Mater. 365–366, 784–787 (2013)
H. Chen, Y. Fang, N. Sun, A swing constraint guaranteed mpc algorithm for underactuated overhead cranes. IEEE/ASME Trans. Mechatron. 21(5), 2543–2555 (2016)
D. Wang, H. He, D. Liu, Intelligent optimal control with critic learning for a nonlinear overhead crane system. IEEE Trans. Ind. Inform. 14(7), 2932–2940 (2017)
Y. Zhao, H. Gao, Fuzzy-model-based control of an overhead crane with input delay and actuator saturation. IEEE Trans. Fuzzy Syst. 20(1), 181–186 (2011)
T. Yang, N. Sun, H. Chen, Y. Fang, Neural network-based adaptive antiswing control of an underactuated ship-mounted crane with roll motions and input dead zones. IEEE Trans. Neural Netw. Learn. Syst. 31(3), 901–914 (2019)
B. Lu, Z. Wu, Y. Fang, N. Sun, Input shaping control for underactuated dual overhead crane system with holonomic constraints. Control Theory Appl. 35(12), 1805–1811 (2018)
A.S. Miller, P. Sarvepalli, W. Singhose, Dynamics and control of dual-hoist cranes moving triangular payloads, in Dynamic Systems and Control Conference, vol. 3 (ASME, San Antonio, 2014), pp. 1–9
J. Huang, K. Zhu, Dynamics and control of three-dimensional dual cranes transporting a bulky payload. Proc. Inst. Mech. Eng., Part C, J. Mech. Eng. Sci. 235(11), 1956–1965 (2021)
J. Vaughan, J. Yoo, W. Singhose, Using approximate multi-crane frequencies for input shaper design, in 2012 12th International Conference on Control, Automation and Systems (IEEE, Jeju, 2012), pp. 639–644
X. Zhao, J. Huang, Distributed-mass payload dynamics and control of dual cranes undergoing planar motions. Mech. Syst. Signal Process. 126, 636–648 (2019)
P. Cai, I. Chandrasekaran, J. Zheng, Y. Cai, Automatic path planning for dual-crane lifting in complex environments using a prioritized multiobjective pga. IEEE Trans. Ind. Inform. 14(3), 829–845 (2017)
B. Lu, Y. Fang, N. Sun, Modeling and nonlinear coordination control for an underactuated dual overhead crane system. Automatica 91, 244–255 (2018)
F.A. Leban, J. Diaz-Gonzalez, G.G. Parker, W. Zhao, Inverse kinematic control of a dual crane system experiencing base motion. IEEE Trans. Control Syst. Technol. 23(1), 331–339 (2014)
S. Qian, B. Zi, H. Ding, Dynamics and trajectory tracking control of cooperative multiple mobile cranes. Nonlinear Dyn. 83(1), 89–108 (2016)
A.V. Perig, A.N. Stadnik, A.A. Kostikov, S.V. Podlesny, Research into 2D dynamics and control of small oscillations of a cross-beam during transportation by two overhead cranes. Shock Vib. 2017, 9605657 (2017)
B. Lu, Y. Fang, N. Sun, Adaptive output-feedback control for dual overhead crane system with enhanced anti-swing performance. IEEE Trans. Control Syst. Technol. 28(6), 2235–2248 (2019)
P. Zhang, Y. Fang, X. Liang, H. Lin, Modeling and nonlinear coordination control of a dual drones lifting system, in 2019 Chinese Control Conference (IEEE, Guangzhou, 2019), pp. 809–814
B. Lu, Y. Fang, N. Sun, Sliding mode control for underactuated overhead cranes suffering from both matched and unmatched disturbances. Mechatronics 47, 116–125 (2017)
R. Xu, Ü. Özgüner, Sliding mode control of a class of underactuated systems. Automatica 44(1), 233–241 (2008)
R. Olfati-Saber, Normal forms for underactuated mechanical systems with symmetry. IEEE Trans. Autom. Control 47(2), 305–308 (2002)
L. Wang, T. Chai, L. Zhai, Neural-network-based terminal sliding-mode control of robotic manipulators including actuator dynamics. IEEE Trans. Ind. Electron. 56(9), 3296–3304 (2009)
Q. Zhou, S. Zhao, H. Li, R. Lu, C. Wu, Adaptive neural network tracking control for robotic manipulators with dead zone. IEEE Trans. Neural Netw. Learn. Syst. 30(12), 3611–3620 (2018)
J. Park, I.W. Sandberg, Universal approximation using radial-basis-function networks. Neural Comput. 3(2), 246–257 (1991)