Using rapid prototyping to produce electrical discharge machining electrodes

Emerald - Tập 2 Số 1 - Trang 4-12 - 1996
Alan Arthur1, Phillip Michael Dickens1, Richard Charles Cobb1
1Department of Manufacturing Engineering and Operations Management, University of Nottingham, UK

Tóm tắt

Presents the background to and efforts being made to find a direct production route using rapid prototype (RP) parts as the electrodes for electrical discharge machining (EDM). It would have the double effect of unlocking the potential of the EDM die sinking process and expanding the role of RP in the production environment. Thin coated stereolithography (SL) models have been used to erode hardened tool steel to a depth of 4mm. Machining efficiency of these copper coated RP models is not comparable to that of conventional machined solid copper electrodes. Parametric optimization has been applied, achieving substantial improvements in machining efficiency. At present these electrodes are suitable for semi‐roughing or finishing cuts in EDM die sinking. Electroforming copper into SL cavities shows potential for manufacture of electrodes with comparable performance to that of solid copper.

Tài liệu tham khảo

1Semon, G., A Practical Guide to Electro‐Discharge Machining, 2nd ed., Ateliers des Charmilles, Geneva, chapter 9, 1975, pp. 63‐76. 2Lück, T., “Comparison of downstream techniques for functional and technical prototypes ‐ fast tooling with RP”, Proceedings of 4th European Conference on Rapid Prototyping and Manufacturing, Belgirate, Italy, 13‐16 July 1995, pp. 247‐60. 3Altan, T., Lilly, B.W., Kruth, J.P,. König, W. Tönshoff, H.K., Van Luttervelt, C.A. and Khairy, A.B., “Advanced Techniques for Die and Mould Manufacturing”, Annals of the CIRP, Volume 42 No. 2, 1992, pp. 706‐16. 4Björke, O. (Ed.), Layer Manufacturing ‐ a Challenge of the Future, Trondheim, 1992. 5Jensen, K. and Hovtun, R., “Making electrodes for EDM with rapid prototyping”, Proceedings of 2nd European Conference on Rapid Prototyping and Manufacturing, University of Nottingham, 15‐16 July 1993, pp. 157‐65. 6Greul, M. Pintat, T. and Greulich, M., “Tool production via fused deposition modeling and electroplating”, Proceedings of 4th European Conference on Rapid Prototyping and Manufacturing, Belgirate, Italy, 13‐16 July 1995, pp. 277‐84. 7Dickens, P.M. and Smith, P.J., “Stereolithography tooling”, Proceedings of 1st European Conference on Rapid Prototyping and Manufacturing, University of Nottingham, 6‐7 July 1992, pp. 309‐17. 8Müller, H., “EDM electrodes made by rapid prototyping”, in Mieritz, B. (Ed.), European Action on Rapid Prototyping Newsletter, January 1994, Danish Technological Institute, Denmark. 9McKeown, B.L., Manufacture of Spark Erosion Electrodes, Patent 2203360A GB, 11 May 1987. 10Chantrill, A., “Manufacture of EDM electrodes from stereolithography models”, commercial bulletin by 3D Systems Inc. Ltd, UK, Electrode Manufacture, August 1994. 11INSTANTCAM (BE‐3527‐89), Deliverable 1&2, Work Area 6 Brite‐Euram. 12Arthur, A. and Dickens, P.M., “Rapid prototyping of EDM electrodes by stereolithography”, International Symposium for ElectroMachining (ISEM) XI, EPFL Lausanne, Switzerland, 17‐20 April 1995, pp. 691‐9. 13Schulthess, A., “New resin developments for stereo‐lithography electroless plating of SL parts”, Proceedings, Society of Manufacturing Engineers (SME),Rapid Prototyping and Manufacturing Conference, Dearborn, MI, 26‐28 April 1994. 14Segal, J.I., “A study of metal sprayed stereolithographic tooling for electrical discharge machining”, MSc dissertation, December 1994, UMIST. 15Schekulin, K., “Adaptive control of EDM”, EDM Digest, Vol. 4 No. 3, pp. 8‐14 16Ross, P.J., Taguchi Techniques for Quality Engineering, 1988, McGraw‐Hill, London, p. 228..
Thông tin
Thông tin xuất bản

Emerald

Tập 2 Số 1

4-12

Thông tin tác giả