International Conference on Material, Machines and Methods for Sustainable Development
SCOPUS (2012-2024)
2195-4364
Cơ quản chủ quản: Springer Verlag
Lĩnh vực:
Mechanical EngineeringAutomotive EngineeringAerospace EngineeringFluid Flow and Transfer Processes
Các bài báo tiêu biểu
On the Impact Test Methodology for the Quick Estimation of Natural Frequency of the Mechanical Systems
- Trang 191-201 - 2021
The identification of natural frequency of machinery is a very important phase during the design, fabrication and testing process of any mechanical systems. This paper represents the experimental methodology for quick determining of natural frequency of a system by...
Improving Mechanical Properties of Concrete Utilizing Crushed-Sand Combined with River Sand
- Trang 189-195 - 2021
The extreme exploitation of river sand in Mekong Delta region has seriously caused landslides sweeping away a large area, even affecting traffic movement on national highway. Thus, utilizing crushed-sand, a co-product in aggregate making, to partially replace river...
Stationary Random Vibration Analysis of Dynamic Vehicle-Bridge Interaction Due to Road Unevenness
- Trang 1121-1138 - 2018
This article presents stationary random vibration analysis of dynamic vehicle-bridge interaction due to road unevenness based on the Finite element method and Monte-Carlo simulation method. The road unevenness are described by a zero-mean stationary Gaussian random...
Full-Scale Self-propulsion Computations Using Body Force Propeller Method for Series Cargo Ship 12500DWT
- Trang 851-859 - 2021
The paper presents a results of study the full-scale self-propulsion characteristic for series cargo ship 12500DWT built in Vietnam based on the unsteady RANSE method with Body Force Propeller method. Two case studies were analyzed: propeller open-water, and...
Effect of Nanosecond Repetitively Pulsed Frequency on Laminar Flame Propagation of Lean n-Butane/Air Mixture with Le >> 1
- Trang 698-704 - 2021
This study aims to present the effect of pulse repetitive frequency (PRF) from nanosecond repetitively pulsed discharge (NRPD) on laminar flame propagation of lean premixed n-butane/air at an equivalence ratio ϕ of 0.7. The lean n-butane/air with Lewis number...
Design and Durability Test of the Main Assemblies of Active Anti-roll bar
- Trang 385-394 - 2023
The anti-roll bar has the effect of increasing the stable motion of the vehicle. It has the role of receiving, transmitting force and torque between the wheel and the chassis, reducing the vibration frequency of the car, ensuring the smoothness and stick on the road...
Optimization of Predicting Spring-Back When V-Bending for SS400 Steel Plate
- Trang 118-125 - 2021
In this paper, the Taguchi method and regression analysis used to evaluate the influence of technological parameters: punch radius, temperature and punch stroke to the spring-back angle after V-bending for SS400 steel plate output. The experiments were designing with...
Study on Predict Spring-Back in V-Bending of SS400 Steel Plate and Select Bending Parameters by Finite Element Method
- Trang 135-144 - 2023
In this study, SS400 steel plate was used to bend the V-shaped parts with different corner radii and bending angles. Based on the desired angle value, punch radius and bend angle (punch stroke) must be selected to get the correct shape. The combined...
Experimental and Numerical Investigations on Flexural Behavior of Retrofitted Reinforced Concrete Beams with Geopolymer Concrete Composites
- Trang 1078-1088 - 2022
Existing multi-storey buildings in earthquake prone regions of India are vulnerable to severe damage under earthquakes. So there is an urgent need for retrofitting of deficient and damaged buildings. Portland cement (PC) production is under critical review due to...
Impact Resistance of Cement Material Partial Replaced by Silica Fume Under the Charpy Test
- Trang 195-206 - 2023
This paper presents the results of an experimental work on impact resistance and compressive strength of ordinary Portland cement replaced by different proportions of silica fume. The main objective of this study is to determine the optimum proportion of silica fume...