IEEE Transactions on Industry Applications
Công bố khoa học tiêu biểu
* Dữ liệu chỉ mang tính chất tham khảo
Sắp xếp:
The Dependence of the Efficiency of Electrohydrodynamic Heat Exchanger on the Electric Conductivity of Liquid
IEEE Transactions on Industry Applications - Tập 53 Số 3 - Trang 2440-2445 - 2017
A Real-Time Predictive-Maintenance System of Aluminum Electrolytic Capacitors Used in Uninterrupted Power Supplies
IEEE Transactions on Industry Applications - Tập 46 Số 4 - Trang 1644-1652 - 2010
Condition monitoring of stator windings in induction motors. II. Experimental investigation of voltage mismatch detectors
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1454-1459 - 2002
For pt.I see ibid., vol.38, no.5, p.1447-53 (2002). Condition-based maintenance
(CBM) of industrial equipment is generally recognized as being the most
cost-effective means for improving equipment availability. However, a
prerequisite to successful implementation of CBM is a reliable detector of
failing components. One such detector, termed the effective negative-sequence
impedance, had previously...
#Condition monitoring #Stator windings #Induction motors #Detectors #Impedance #Voltage #Current measurement #Maintenance #Degradation #Fault detection
Globoidal cam indexing servo drive control by IVSMFC with load torque estimator
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1326-1333 - 2002
This paper introduces an integral variable-structure model-following control
(IVSMFC) incorporated with a load torque estimator based on variable-structure
technique for a globoidal cam indexing system. IVSMFC features excellent
robustness and performance properties under certain disturbances and parameter
variations. However, heavy time-varying load may influence expected performance.
In a cam sy...
#Computer aided manufacturing #CADCAM #Indexing #Servomechanisms #Torque control #Automotive electronics #Degradation #Servosystems #Vibrations #Power system stability
Price Incentive-Based Charging Navigation Strategy for Electric Vehicles
IEEE Transactions on Industry Applications - Tập 56 Số 5 - Trang 5762-5774 - 2020
With rapid development of the electric vehicle (EV) industry, charging
infrastructures are built fast. However, the unreasonable deployments with
increasing EVs contribute to a long queuing time for charging demand of EVs,
especially in the peak hours. How to navigate a specific EV to economically
satisfy its charging demand, while relieve the traffic burden, is an urgent
problem. To address that,...
#Charging navigation #dynamic queue #electric vehicle (EV) #price incentive #reservation opportunity cost
Condition monitoring of stator windings in induction motors. I. Experimental investigation of the effective negative-sequence impedance detector
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1447-1453 - 2002
The former US Bureau of Mines funded a research project aimed at developing the
enabling technology for incipient failure prediction in electric power system
components as a means of reducing the injuries and fatalities that sometimes
occur when equipment malfunctions. Over the ensuing years, interest in this has
waxed and waned, but interest has been growing for both civilian and military
applica...
#Condition monitoring #Stator windings #Induction motors #Detectors #Insulation #Impedance #Predictive maintenance #Safety #Industry Applications Society #Costs
Design considerations for a soft-switched modular 2.4-MVA medium-voltage drive
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1400-1411 - 2002
A new six-phase 2.4-MVA soft-switched medium-voltage drive system utilizing
series-stacked modules with low-voltage devices has been developed. The drive
system combines a new soft-switched DC-DC converter with resonant DC-link
inverter technology to deliver extremely low total harmoic distortion sinusoidal
output, high power density, and high efficiency. The series-stacked
configuration with the ...
#Medium voltage #Magnetic resonance #Voltage control #DC-DC power converters #Inverters #Zero voltage switching #Drives #Control design #Magnetic devices #Clamps
Fuzzy-logic-based power control system for multifield electrostatic precipitators
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1190-1195 - 2002
The power consumption of large precipitators can be in the range of 1 MW and
above. Depending on the dust load properties, the electrical power may be
reduced by up to 50% by applying fuzzy logic, without significantly increasing
the dust emissions. The new approach uses fuzzy logic for optimization of
existing electrostatic precipitators. The software runs on a standard personal
computer platform...
#Power control #Electrostatic precipitators #Fuzzy logic #Microcomputers #Energy consumption #Software standards #Operating systems #Computer industry #Electrical equipment industry #Industrial control
Conducted EMI in PWM inverter for household electric appliance
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1370-1379 - 2002
This paper presents the mitigation effort of the conducted electromagnetic
interference (EMI) in the pulsewidth-modulation (PWM) inverter for household
electric appliances. First, noise sources in the PWM inverter are investigated
to get an understanding of their characteristics, and the propagation of the
conducted EMI is described. Next, input filters are added to: suppress it. With
changing fil...
#Electromagnetic interference #Pulse width modulation inverters #Home appliances #Passive filters #EMP radiation effects #Pulse inverters #Electromagnetic propagation #Active filters #Attenuation #Active noise reduction
Effect of surge testing on unimpregnated ground insulation of VPI stator coils
IEEE Transactions on Industry Applications - Tập 38 Số 5 - Trang 1460-1465 - 2002
The IEEE 522 guide for testing turn-to-turn insulation in form wound coils for
alternating-current machines is currently under working group review, with the
intent to eliminate problems in interpretation and application. The guide is
written for the testing of fully processed coils, while the motor industry uses
the test guide for pre-impregnated vacuum-pressure-impregnated coils wound in
the sta...
#Surges #Insulation testing #Stators #Coils #Voltage #Impulse testing #Wounds #Manufacturing #Finite element methods #Petroleum
Tổng số: 50
- 1
- 2
- 3
- 4
- 5