Internal Friction in Quartz Glass Made Using Natural and Synthetic Raw MaterialGlass and Ceramics - Tập 72 - Trang 437-440 - 2016
R. Sh. Nasyrov, V. M. Lopatin, B. S. Lunin
The sequence of operations involved in the fabrication of samples of quartz glass from highly enriched natural raw material and synthetic silicon dioxide is described and implemented. Attention is focused on purifying the raw material and maintaining a clean regime during the glass fabrication process. It is shown that synthetic raw material is best for obtaining quartz glass with low internal fri...... hiện toàn bộ
Characteristics of Cutting Parameters and Their Effect on the Glass Edge QualityGlass and Ceramics - Tập 58 - Trang 303-305 - 2001
V. I. Kondrashov, L. A. Shitova, V. A. Litvinov, V. V. Surkov
The optimum parameters of glass cutting are studied and substantiated: the material and the sharpening angle of the glass-cutting roll, the load applied to the roll, the role of the propping liquid, and the effect of all these parameters on the glass edge quality.
Evolution of Structure in Sintering Ceramics Based on Aluminum Oxide with a Eutectic AdditiveGlass and Ceramics - - 2002
A. V. Belyakov, E. S. Lukin, N. A. Makarov
The aspects of sintering of corundum-based ceramics with a eutectic additive of the MnO – Al2O3 – SiO2 system are considered in the context of the evolution of its structure. In sintering in the presence of a small quantity of eutectic, the behavior of the system is largely different before and after the emergence of the liquid phase. Before the liquid phase formation, the process is determined by...... hiện toàn bộ