Zoning study on the fatigue crack propagation behaviors of a double-sided electron beam welded joint of TC4 titanium alloy with the thickness of 140 mm

Calamaz, 2008, A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V, Int J Mach Tools Manuf, 48, 275, 10.1016/j.ijmachtools.2007.10.014 Lu, 2020, High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components, Int J Mach Tools Manuf, 148, 10.1016/j.ijmachtools.2019.103475 Zhang, 2018, Effects of laser welding and post-weld heat treatment on microstructure and mechanical properties of aged Ti55531 Alloy, Materials (Basel), 11 Zhang, 2019, Effects of minor Zr addition on the microstructure and mechanical properties of laser welded dissimilar joint of titanium and molybdenum, Mater Sci Eng, A, 742, 788, 10.1016/j.msea.2018.10.037 Wang, 2018, Microstructure and mechanical properties of electron beam welded titanium alloy Ti-6246, J Mater Sci Technol, 34, 570, 10.1016/j.jmst.2016.10.007 Zhang, 2019, Temperature-gradient induced microstructure evolution in heat-affected zone of electron beam welded Ti-6Al-4V titanium alloy, J Mater Sci Technol, 35, 1681, 10.1016/j.jmst.2019.04.004 Wang, 2016, Tensile and fatigue behavior of electron beam welded dissimilar joints of Ti–6Al–4V and IMI834 titanium alloys, Mater Sci Eng, A, 649, 146, 10.1016/j.msea.2015.09.107 Tao, 2016, Effect of micromorphology at the fatigue crack tip on the crack growth in electron beam welded Ti-6Al-4V joint, Mater Charact, 120, 185, 10.1016/j.matchar.2016.08.029 Ji, 2014, Fatigue crack growth characteristics of inertia friction welded Ti17 alloy, Fatigue Fract Eng Mater Struct, 37, 39, 10.1111/ffe.12076 Wang, 2015, Fatigue property of TC4 joint with a thickness of 60 mm by electron beam welding, Trans China Weld Inst Han, 2018, Study on microstructure and fatigue properties of electron beam welded joints of TC18 titanium alloy plate along thickness, Hot Working Technol, 47, 45 Lu, 2012, Effect of electron beam welding on the microstructures and mechanical properties of thick TC4-DT alloy, Mater Des, 34, 509, 10.1016/j.matdes.2011.09.004 Wu, 2016, Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding, Mater Sci Eng, A, 677, 50, 10.1016/j.msea.2016.09.030 Edwards, 2016, Comparative study of fatigue and fracture in friction stir and electron beam welds of 24 mm thick titanium alloy Ti-6Al-4 V, Fatigue Fract Eng Mater Struct, 39, 1226, 10.1111/ffe.12434 Li, 2011, Effects of the heterogeneity in the electron beam welded joint on fatigue crack growth in Ti–6Al–4V alloy, Mater Sci Eng, A, 529, 170, 10.1016/j.msea.2011.09.014 Fricke, 2016, Fatigue strength of laser-stake welded T-joints subjected to combined axial and shear loads, Weld World, 60, 593, 10.1007/s40194-016-0322-z Fricke, 2017, Fatigue assessment of local stresses at fillet welds around plate corners, Int J Fatigue, 101, 169, 10.1016/j.ijfatigue.2017.01.011 Braun, 2020, Application of local approaches to the assessment of fatigue test results obtained for welded joints at sub-zero temperatures, Int J Fatigue, 138, 10.1016/j.ijfatigue.2020.105672 Paris, 1963, A critical analysis of crack propagation laws, J Basic Eng, 85, 528, 10.1115/1.3656900 Long, 2020, Microstructural characteristics and low cycle fatigue properties at 230 °C of different weld zone materials from a 100 mm thick dissimilar weld of ultra-supercritical rotor steel, Int J Fatigue, 130, 10.1016/j.ijfatigue.2019.105248 Schijve, 2009 Tang, 2019, Stress state and stress-induced microstructural evolution around the crack tip of G115 steel after dwell-fatigue crack propagation, Fatigue Fract Eng Mater Struct, 42, 2290, 10.1111/ffe.13051 Goto, 2016, Role of microstructure on initiation and propagation of fatigue cracks in precipitate strengthened Cu–Ni–Si alloy, Int J Fatigue, 87, 15, 10.1016/j.ijfatigue.2016.01.004 Longzhou, 2003, Effects of NiAl-beta precipitates on fatigue crack propagation of INCONEL alloys 783 under time-dependent condition with various load ratios, Scr. Mater. (USA), 48, 551, 10.1016/S1359-6462(02)00503-1 Wen, 2018, Over-aging influenced matrix precipitate characteristics improve fatigue crack propagation in a high Zn-containing Al-Zn-Mg-Cu alloy, Mater Sci Eng, A, 716, 42, 10.1016/j.msea.2018.01.040 Ma, 2020, Fatigue short crack propagation behavior of selective laser melted Inconel 718 alloy by in-situ SEM study: Influence of orientation and temperature, Int J Fatigue, 139, 10.1016/j.ijfatigue.2020.105739 Qiu, 2020, Study on crack dynamic propagation behavior and fracture toughness in rock-mortar interface of concrete, Eng Fract Mech, 228, 10.1016/j.engfracmech.2019.106798 Ma, 2020, Investigation of fatigue crack propagation behavior of 5083 aluminum alloy under various stress ratios: Role of grain boundary and Schmid factor, Mater Sci Eng, A, 773, 10.1016/j.msea.2019.138871