Zirconia bond strength durability following artificial aging: A systematic review and meta-analysis of in vitro studies

Denry, 2014, Emerging ceramic-based materials for dentistry, J Dent Res, 93, 1235, 10.1177/0022034514553627 Pjetursson B.E., Sailer I., Makarov N.A., Zwahlen M., Thoma D.S. Corrigendum to “All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs” [Dental Materials 31 (6) (2015) 624–639](S0109564115000627)(10.1016/j.den. Dent Mater 2017;33:e48–51. https://doi.org/10.1016/j.dental.2016.09.033. Minakuchi, 2014, Meta-analysis of bonding effectiveness to zirconia ceramics, J Dent Res, 93, 329, 10.1177/0022034514524228 Blatz, 2018, The effect of resin bonding on long-term success of high-strength ceramics, J Dent Res, 97, 132, 10.1177/0022034517729134 Tzanakakis, 2015, Is there a potential for durable adhesion to zirconia restorations? A systematic review, J Prosthet Dent, 115, 9, 10.1016/j.prosdent.2015.09.008 Thammajaruk, 2018, Bonding of composite cements to zirconia: a systematic review and meta-analysis of in vitro studies, J Mech Behav Biomed Mater, 80, 258, 10.1016/j.jmbbm.2018.02.008 Otani, 2015, A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP, Dent Mater, 31, 648, 10.1016/j.dental.2015.03.002 Ramos, 2019, Silica-based infiltrations for enhanced zirconia-resin interface toughness, J Dent Res, 98, 423, 10.1177/0022034518819477 da Silva, 2021, Effect of silica coating and laser treatment on the flexural strength, surface characteristics, and bond strength of a dental zirconia, Eur J Oral Sci, 129, 1, 10.1111/eos.12754 Lima, 2019, Effect of silane and MDP-based primers on physico-chemical properties of zirconia and its bond strength to resin cement, Dent Mater, 35, 1557, 10.1016/j.dental.2019.07.008 Chen, 2017, The effects of water on degradation of the zirconia-resin bond, J Dent, 64, 23, 10.1016/j.jdent.2017.04.004 Aboushelib, 2018, Ultrastructural analysis and long-term evaluation of composite-zirconia bond strength, J Adhes Dent, 20, 33 Lima, 2019, Effect of cleaning protocol on silica deposition and silica-mediated bonding to Y-TZP, Dent Mater, 35, 1603, 10.1016/j.dental.2019.08.099 Zhang, 2020, Effects of air-abrasion pressure on mechanical and bonding properties of translucent zirconia, Clin Oral Invest Tzanakakis, 2021, Effect of water storage on hardness and interfacial strength of resin composite luting agents bonded to surface-treated monolithic zirconia, Dent J, 9, 78, 10.3390/dj9070078 Müller, 2022, Adhesion of different resin cements to zirconia: effect of incremental versus bulk build up, use of mould and ageing, Materials, 15 Yang, 2020, Bond durability when applying phosphate ester monomer–containing primers vs. self-adhesive resin cements to zirconia: Evaluation after different aging conditions, J Prosthodont Res, 64, 193, 10.1016/j.jpor.2019.06.008 Al-Dobaei, 2020, Influence of cleaning methods on resin bonding to contaminated translucent 3Y-TZP ceramic, J Adhes Dent, 22, 383 Yang, 2018, Effects of luting cements and surface conditioning on composite bonding performance to zirconia, J Adhes Dent, 20, 549 Chen, 2019, The effect of monowave and polywave light-polymerization units on the adhesion of resin cements to zirconia, J Prosthet Dent, 1 Vechiato-Filho, 2017, Surface analysis and shear bond strength of zirconia on resin cements after non-thermal plasma treatment and/or primer application for metallic alloys, Mater Sci Eng C, 72, 284, 10.1016/j.msec.2016.11.033 Xie, 2016, Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better, Dent Mater, 32, 403, 10.1016/j.dental.2015.12.014 Yu, 2021, Change of phase transformation and bond strength of Y-TZP with various hydrofluoric acid etching, Restor Dent Endod, 46 Bielen, 2015, Bonding effectiveness to differently sandblasted dental zirconia, J Adhes Dent, 17, 235 Kim, 2019, Influence of non-thermal atmospheric pressure plasma treatment on shear bond strength between Y-TZP and self-adhesive resin cement, Materials, 12 Piest, 2018, Efficacy of plasma treatment for decontaminating zirconia, J Adhes Dent, 20, 289 Aggarwal, 2018, The role of a MDP/VBATDT-primer composition on resin bonding to Zirconia, Metals, 8 Tsujimoto, 2017, Interfacial characteristics and bond durability of universal adhesive to various substrates, Oper Dent, 42, e59, 10.2341/15-353-L Khanlar, 2022, Effect of air-particle abrasion protocol and primer on the topography and bond strength of a high-translucent zirconia ceramic, J Prosthodont, 31, 228, 10.1111/jopr.13372 Khanlar, 2022, The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia, Clin Oral Invest, 26, 3547, 10.1007/s00784-021-04323-7 Garcia, 2022, Bonding of resin cements to ultra-translucent zirconia after aging for 24 hours and 1 year, Int J Prosthodont, 35, 460, 10.11607/ijp.7703 Steiner, 2019, Zirconia primers improve the shear bond strength of dental zirconia, J Prosthodont Yenisey, 2016, Effect of surface treatments on the bond strength between resin cement and differently sintered zirconium-oxide ceramics, J Prosthodont Res, 60, 36, 10.1016/j.jpor.2015.09.001 Al-Harbi, 2016, In vitro shear bond strength of Y-TZP ceramics to different core materials with the use of three primer/resin cement systems, J Prosthet Dent, 115, 84, 10.1016/j.prosdent.2015.07.002 De Sousa R.S., Campos F., Sarmento H.R., Alves M.L.L., Dal Piva AMDO, Gondim L.D., et al. Surface roughness and bond strength between Y-TZP and self-adhesive resin 6] Lümkemann N, Schönhoff LM, Buser R, Stawarczyk B. Effect of cleaning protocol on bond strength between resin composite cement and three different CAD/CAM materials. Materials (Basel) 2020;13:1–12. https://doi.org/10.3390/ma13184150. Lümkemann, 2020, Effect of Cleaning Protocol on Bond Strength between Resin Composite Cement and Three Different CAD/CAM Materials, Materials (Basel), 13, 10.3390/ma13184150 Lümkemann, 2019, Different surface modifications combined with universal adhesives: the impact on the bonding properties of zirconia to composite resin cement, Clin Oral Invest, 23, 3941, 10.1007/s00784-019-02825-z Pozzobona, 2016, Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation, J Adhes Sci Technol, 30, 412, 10.1080/01694243.2015.1101189 Liebermann, 2019, Impact of recently developed universal adhesives on tensile bond strength to computer-aided design/manufacturing ceramics, Oper Dent, 44, 386, 10.2341/18-017-L Kim, 2015, Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding, J Adv Prosthodont, 7, 85, 10.4047/jap.2015.7.2.85 Vicente, 2016, Influence of cyclic loading on the adhesive effectiveness of resin-zirconia interface after femtosecond laser irradiation and conventional surface treatments, Lasers Surg Med, 48, 36, 10.1002/lsm.22442 Alnassar, 2016, Effect of different ceramic primers on shear bond strength of resin-modified glass ionomer cement to zirconia, J Adhes Sci Technol, 30, 2429, 10.1080/01694243.2016.1184404 Alnassar, 2017, Effect of surface treatments and aging solutions on the repair bond strength of composite resin to zirconia, J Biomater Tissue Eng, 7, 1045, 10.1166/jbt.2017.1666 Kaimal, 2017, Evaluation of effect of zirconia surface treatment, using plasma of argon and silane, on the shear bond strength of two composite resin cements, J Clin Diagn Res, 11 Fernandes Neto, 2022, Physical-chemical characterization and bond strength to zirconia of dental adhesives with different monomer mixtures and photoinitiator systems light-activated with poly and monowave devices, Biomater Invest Dent, 9, 20 Sriamporn, 2022, The effectiveness of various functional monomers in self-Adhesive resin cements on prosthetic materials, J Int Soc Prev Community Dent, 12, 332 Shafiei, 2019, Influence of primers and additional resin layer on zirconia repair bond strength, J Prosthodont, 28, 826, 10.1111/jopr.13011 Byeon, 2017, Shear bond strength of Al2O3 sandblasted Y-TZP ceramic to the orthodontic metal bracket, Materials, 10, 1, 10.3390/ma10020148 Chen, 2017, Chemical affinity of 10-methacryloyloxydecyl dihydrogen phosphate to dental zirconia: Effects of molecular structure and solvents, Dent Mater, 33, e415, 10.1016/j.dental.2017.09.013 Yu, 2020, Effect of hydrofluoric acid-based etchant at an elevated temperature on the bond strength and surface topography of Y-TZP ceramics, Restor Dent Endod, 45, 4, 10.5395/rde.2020.45.e6 Murakami, 2017, Zirconia surface modification by a novel zirconia bonding system and its adhesion mechanism, Dent Mater, 33, 1371, 10.1016/j.dental.2017.09.001 Şanli, 2015, Influence of surface treatment on the resin-bonding of zirconia, Dent Mater, 31, 657, 10.1016/j.dental.2015.03.004 Noro, 2015, Influence of hydrophilic pre-treatment on resin bonding to zirconia ceramics, Bull Tokyo Dent Coll, 56, 33, 10.2209/tdcpublication.56.33 Qian, 2016, Alkaline nanoparticle coatings improve resin bonding of 10-methacryloyloxydecyldihydrogenphosphate-conditioned zirconia, Int J Nanomed, 11, 5057, 10.2147/IJN.S116006 Takahashi A., Takagaki T., Wada T., Uo M., Nikaido T., Tagami J. The effect of different cleaning agents on saliva contamination for bonding performance of zirconia ceramics 2018. https://doi.org/10.4012/dmj.2017–376. Özdemir, 2019, Effect of MDP-based silane and different surface conditioner methods on bonding of resin cements to zirconium framework, J Prosthodont, 28, 79, 10.1111/jopr.12650 Llerena-Icochea, 2017, Bonding polycrystalline zirconia with 10-MDP-containing adhesives, Oper Dent, 42, 335, 10.2341/16-156-L Park, 2017, The effect of plasma on shear bond strength between resin cement and colored zirconia, J Adv Prosthodont, 9 Nagaoka, 2017, Chemical interaction mechanism of 10-MDP with zirconia, Sci Rep, 7 Cho, 2017, Effect of zirconia surface treatment using nitric acid-hydrofluoric acid on the shear bond strengths of resin cements, J Adv Prosthodont, 9, 77, 10.4047/jap.2017.9.2.77 Chen, 2016, Dipentaerythritol penta-acrylate phosphate - an alternative phosphate ester monomer for bonding of methacrylates to zirconia, Sci Rep, 6, 1, 10.1038/srep39542 Wei, 2018, Production of alumina micro abrasives coated with nano-silica for bonding improvements to zirconia, J Exp Nanosci, 13, 212, 10.1080/17458080.2018.1502478 Kim, 2022, Effect of 9% hydrofluoric acid gel hot-etching surface treatment on shear bond strength of resin cements to zirconia ceramics, Med, 58 Kim, 2016, Effect of surface treatment on shear bond strength between resin cement and Ce-TZP/Al2O3, Biomed Res Int, 2016 Samran, 2019, Bond strength durability of self-adhesive resin cements to zirconia ceramic: An in vitro study, J Prosthet Dent, 121, 477, 10.1016/j.prosdent.2018.03.026 Bömicke, 2016, Durability of resin-zirconia bonds produced using methods available in dental practice, J Adhes Dent, 18, 17 Sawada, 2016, Influence of pre-sintered zirconia surface conditioning on shear bond strength to resin cement, Materials, 9, 1, 10.3390/ma9070518 Diniz, 2019, Impact of acid concentration and firing on the long-term bond strength of a zirconia-lithium silicate ceramic following adhesive cementation, J Adhes Dent, 21, 355 Malgaj, 2020, The effect of firing protocols on the resin-bond strength to alumina-coated zirconia ceramics, Adv Appl Ceram, 119, 267, 10.1080/17436753.2019.1651503 Sathish, 2019, Effect of thermocycling on the micro-tensile bond strength between self-adhesive resin cement and nonphosphate monomer cements on zirconium-oxide ceramics, Indian J Dent Res, 30, 73 de Araújo Neto, 2022, Effects of shades of a multilayered zirconia on light transmission, monomer conversion, and bond strength of resin cement, J Esthet Restor Dent, 34, 412, 10.1111/jerd.12821 Malgaj, 2021, The influence of nanostructured alumina coating on bonding and optical properties of translucent zirconia ceramics: In vitro evaluation, Coatings, 11 Liu, 2016, Non-thermal plasma enhanced bonding of resin cement to zirconia ceramic, Clin Plasma Med, 4, 50, 10.1016/j.cpme.2016.08.002 Thammajaruk, 2021, Shear bond strength of composite cement to lithium-disilicate glass-coated zirconia versus alumina air-abraded zirconia, J Adhes Dent, 23, 267 Scribante, 2016, Orthodontics: bracket materials, adhesives systems, and their bond strength, Biomed Res Int, 2016, 10, 10.1155/2016/1329814 Akay, 2019, Strengthen adhesion between zirconia and resin cement using different surface modifications, Int J Appl Ceram Technol, 16, 917, 10.1111/ijac.13168 Lee, 2021, Effect of incorporating a dimethacrylate monomer on the shear bond strength of two adhesive resin cements to zirconia ceramic, J Nanosci Nanotechnol, 21, 4046, 10.1166/jnn.2021.19166 Gutierrez, 2020, Effect of methacryloyloxydecyl dihydrogen phosphate-containing silane and adhesive used alone or in combination on the bond strength and chemical interaction with zirconia ceramics under thermal aging, Oper Dent, 45, 516, 10.2341/18-093-L Silva, 2016, Influence of surface treatments on topography and bond strength of densely-sintered zirconium-oxide ceramic, Ceram Int, 42, 8136, 10.1016/j.ceramint.2016.02.019 Sarfaraz, 2020, Comparison of the bond strength of composite resin to zirconia and composite resin to polyether ether ketone: an in vitro study, J Pharm Bioallied Sci, 12, S504, 10.4103/jpbs.JPBS_147_20 li, 2020, High bonding strength between zirconia and composite resin based on combined surface treatment for dental restorations, J Appl Biomater Funct Mater, 18 Ataol, 2018, Effects of surface treatments on repair bond strength of a new CAD/CAM ZLS glass ceramic and two different types of CAD/CAM ceramics, J Oral Sci, 60, 201, 10.2334/josnusd.17-0109 Moqbel, 2022, Influence of aging and surface treatment on the composite bond strength to translucent 3Y-TZP zirconia, J Adhes Dent, 24, 375 Rui, 2021, High shear bond strength between zirconia ceramic and resin cement via surface treatment and cleaning, Mater Res Express, 8 Rebholz-Zaribaf, 2017, Adhesion to zirconia as a function of primers/silane coupling agents, luting cement types, aging and test methods, J Adhes Sci Technol, 31, 1408, 10.1080/01694243.2016.1259727 Lopes, 2016, Different Strategies to Bond bis-GMA-based resin cement to zirconia, J Adhes Dent, 18, 239 Seo, 2022, Effect of air abrasion, acid etching, and aging on the shear bond strength with resin cement to 3Y-TZP zirconia, J Mech Behav Biomed Mater, 134 Gomes, 2015, Thermocycling effect on microshear bond strength to zirconia ceramic using Er:YAG and tribochemical silica coating as surface conditioning, Lasers Med Sci, 30, 787, 10.1007/s10103-013-1433-z Kang, 2022, Enhancing resin cement adhesion to zirconia by oxygen plasma-aided silicatization, Materials, 15 Negreiros, 2017, Effect of cleaning agent, primer application and their combination on the bond strength of a resin cement to two yttrium-tetragonal zirconia polycrystal zirconia ceramics, Eur J Dent, 11, 6, 10.4103/ejd.ejd_276_16 Dal Piva, 2019, Silica coating followed by heat-treatment of MDP-primer for resin bond stability to yttria-stabilized zirconia polycrystals, J Biomed Mater Res - Part B Appl Biomater, 33 Kim, 2015, Effects of multipurpose, universal adhesives on resin bonding to zirconia ceramic, Oper Dent, 40, 55, 10.2341/13-303-L Re, 2015, Effect of thermal cycling and low pressure sandblasting on the bond strength of a self-adhesive cement to Y-TZP zirconia, J Adhes Sci Technol, 29, 1745, 10.1080/01694243.2015.1046729 Cadore-Rodrigues, 2020, Stable resin bonding to Y-TZP ceramic with air abrasion by alumina particles containing 7% silica, J Adhes Dent, 22, 149 Silveira, 2022, Bond strength between different zirconia-based ceramics and resin cement before and after aging, Coatings, 12 Wille, 2017, Durability of resin bonding to lithium disilicate and zirconia ceramic using a self-etching primer, J Adhes Dent, 19, 491 Elsayed, 2017, Tensile bond strength of so-called universal primers and universal multimode adhesives to zirconia and lithium disilicate ceramics, J Adhes Dent, 19, 221 Koko, 2020, Effects of the ratio of silane to 10-methacryloyloxydecyl dihydrogenphosphate (MDP) in primer on bonding performance of silica-based and zirconia ceramics, J Mech Behav Biomed Mater, 112, 1, 10.1016/j.jmbbm.2020.104026 Hallmann, 2016, Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin, Dent Mater, 32, 631, 10.1016/j.dental.2016.02.001 Yoshida, 2020, Influence of alumina air-abrasion for highly translucent partially stabilized zirconia on flexural strength, surface properties, and bond strength of resin cement, J Appl Oral Sci, 28 Passia, 2016, Short communication Bond strength of a new generation of universal bonding systems to zirconia ceramic, J Mech Behav Biomed Mater, 62, 268, 10.1016/j.jmbbm.2016.04.045 Ebeid, 2018, Bond strength of resin cement to zirconia treated in pre-sintered stage, J Mech Behav Biomed Mater, 86, 84, 10.1016/j.jmbbm.2018.06.027 Al-Akhali, 2021, Influence of elapsed time between airborne-particle abrasion and bonding to zirconia bond strength, Dent Mater, 37, 516, 10.1016/j.dental.2020.12.010 Luz Madrigal, 2021, The effect of curing mode of dual-cure resin cements on bonding performance of universal adhesives to enamel, dentin and various restorative materials, Dent Mater J, 40, 446, 10.4012/dmj.2020-077 Yoshida, 2021, Effect of 10-methacryloyloxydecyl dihydrogen phosphate concentrations in primers on bonding resin cements to zirconia, J Prosthodont, 30, 356, 10.1111/jopr.13255 Güers, 2019, Durability of resin bonding to zirconia ceramic after contamination and the use of various cleaning methods, Dent Mater, 35, 1388, 10.1016/j.dental.2019.07.027 Xiong, 2021, Effect of airborne-particle abrasion protocols and MDP-based Primer on the bond strength of highly translucent zirconia, J Adhes Dent, 23, 437 Abu Ruja, 2019, Ultrashort-pulse laser as a surface treatment for bonding between zirconia and resin cement, Dent Mater, 35, 1545, 10.1016/j.dental.2019.07.009 Ruales-Carrera, 2019, Adhesion behavior of conventional and high-translucent zirconia: effect of surface conditioning methods and aging using an experimental methodology, J Esthet Restor Dent, 1 Sakrana, 2017, Effect of chemical etching solutions versus air abrasion on the adhesion of self-adhesive resin cement to IPS e.max ZirCAD with and without aging, Int J Esthet Dent, 12, 72 Thammajaruk, 2018, Influence of nano-structured alumina coating on composite-zirconia bonding and its characterization, J Adhes Dent, 20, 233 Thammajaruk, 2019, Influence of glass-ceramic coating on composite zirconia bonding and its characterization, Dent Mater, 35, 105, 10.1016/j.dental.2018.11.001 Sakrana, 2020, Bond strength durability of adhesive cements to translucent zirconia, Eff Surf Cond, 161 Lenz, 2021, Resin bond strength to translucent zirconia: a 2-year follow-up, Int J Adhes Adhes, 110 Xiong, 2021, Effect of airborne-particle abrasion protocols and mdp-based primer on the bond strength of highly translucent zirconia, J Adhes Dent, 23, 437 Su, 2021, A novel porous silica-zirconia coating for improving bond performance of dental zirconia, J Zhejiang Univ Sci B, 22, 214, 10.1631/jzus.B2000448 Chuang, 2017, Effects of silane- and MDP-based primers application orders on zirconia–resin adhesion—A ToF-SIMS study, Dent Mater, 33, 923, 10.1016/j.dental.2017.04.027 Lee, 2015, Evaluation of shear bond strength between dual cure resin cement and zirconia ceramic after thermocycling treatment, J Adv Prosthodont, 7, 1, 10.4047/jap.2015.7.1.1 Akazawa, 2017, Effect of mechanochemical surface preparation on bonding to zirconia of a trin-butylborane initiated resin, Dent Mater J, 36, 19, 10.4012/dmj.2016-099 Yagawa, 2017, Effect of priming agents on shear bond strengths of resin-based luting agents to a translucent zirconia material, J Prosthodont Res Ramos, 2020, Strength and bondability of a dental Y-TZP after silica sol-gel infiltrations, Ceram Int, 46, 17018, 10.1016/j.ceramint.2020.03.288 Oliveira-Ogliari, 2015, Methacrylate bonding to zirconia by in situ silica nanoparticle surface deposition, Dent Mater, 31, 68, 10.1016/j.dental.2014.11.011 Pott, 2016, Influence of artificial aging on the shear bond strength of zirconia - composite interfaces after pretreatment with new 10 - MDP adhesive systems, Jdmt, 5, 1 Zhao, 2022, The effect of adhesive surface with porcelain sintering and two silane coupling agents on the adhesive properties of zirconia, Ann Transl Med, 10 Noda, 2017, The effect of five kinds of surface treatment agents on the bond strength to various ceramics with thermocycle aging, Dent Mater J, 36, 755, 10.4012/dmj.2016-383 Alegría-Acevedo, 2022, In vitro performance of different universal adhesive systems on several CAD/CAM restorative materials after thermal aging, Oper Dent, 47, 107, 10.2341/20-203-L Lung, 2015, Silica coating of zirconia by silicon nitride hydrolysis on adhesion promotion of resin to zirconia, Mater Sci Eng C, 46, 103, 10.1016/j.msec.2014.10.029 Campos, 2016, A new silica-infiltrated Y-TZP obtained by the sol-gel method, J Dent, 48, 55, 10.1016/j.jdent.2016.03.004 Wandscher, 2016, Tribochemical glass ceramic coating as a new approach for resin adhesion to zirconia, J Adhes Dent, 18, 435 Thammajaruk, 2020, Shear bond strength of composite cement to alumina-coated versus tribochemical silica-treated zirconia, J Mech Behav Biomed Mater, 105, 10.1016/j.jmbbm.2020.103710 Abdalla, 2019, Dental resin-zirconia bonding promotion using high-silica PVD coating with high ionization sputtering processing, Coatings, 9 Chen, 2020, Effects of tribochemical silica coating and alumina-particle air abrasion on 3Y-TZP and 5Y-TZP: Evaluation of surface hardness, roughness, bonding, and phase transformation, J Adhes Dent, 22, 373 Qeblawi, 2015, In vitro shear bond strength of two self-adhesive resin cements to zirconia, J Prosthet Dent, 113, 122, 10.1016/j.prosdent.2014.08.006 Feitosa, 2015, Effect of cleansing methods on saliva-contaminated zirconia- an evaluation of resin bond durability, Oper Dent, 40, 163, 10.2341/13-323-L Maño, 2020, In vitro bonding performance of modern self-adhesive resin cements and conventional resin-modified glass ionomer cements to prosthetic substrates, Appl Sci, 10, 1, 10.3390/app10228157 Yang L. Durability of Resin Bonding to Zirconia Using Products Containing 10-Methacryloyloxydecyl Dihydrogen 2018;20:279–287. https://doi.org/10.3290/j.jad.a40989. Pitta, 2018, Effect of saliva contamination and artificial aging on different primer/cement systems bonded to zirconia, J Prosthet Dent, 119, 833, 10.1016/j.prosdent.2017.07.006 Soto-Montero, 2022, Effect of airborne particle abrasion and primer application on the surface wettability and bond strength of resin cements to translucent zirconia, J Adhes Sci Technol Liu, 2020, Investigating the shear bond strength of five resin-based luting agents to zirconia ceramics, J Oral Sci, 62, 84, 10.2334/josnusd.18-0480 Lee, 2015, Improved resin-zirconia bonding by room temperature hydrofluoric acid etching, Materials, 8, 850, 10.3390/ma8030850 Sanal, 2020, Do different sintering conditions influence bond strength between the resin cements and a currently used esthetic zirconia, J Adhes Sci Technol, 34, 1809, 10.1080/01694243.2020.1783773 Lee, 2015, Comparative shear-bond strength of six dental self-adhesive resin cements to zirconia, Materials, 8, 3306, 10.3390/ma8063306 Zhao, 2016, Bond strength of primer/cement systems to zirconia subjected to artificial aging, J Prosthet Dent, 116, 790, 10.1016/j.prosdent.2016.03.020 Saade, 2020, Evaluation of the effect of different surface treatments, aging and enzymatic degradation on zirconia-resin micro-shear bond strength, Clin Cosmet Invest Dent, 12, 1, 10.2147/CCIDE.S219705 Druck, 2015, Adhesion to Y-TZP ceramic: study of silica nanofilm coating on the surface of Y-TZP, J Biomed Mater Res - Part B Appl Biomater, 103, 143, 10.1002/jbm.b.33184 Salem, 2019, In vitro evaluation of shear bond strength of three primer/resin cement systems to monolithic zirconia, Int J Prosthodont, 32, 519, 10.11607/ijp.6258 Elgendy, 2020, Micro-shear bond strength of bioactive cement to translucent zirconia after thermocycyling: a comparative in-vitro study, Braz Dent Sci, 23 Yoshida, 2018, Influence of cleaning methods on resin bonding to saliva-contaminated zirconia, J Esthet Restor Dent, 30, 259, 10.1111/jerd.12369 Darvizeh, 2015, In-situ nano-silica deposition and air-abrasion with Bioglass 45S5 or aluminium oxide: Effects on methacrylate bonding to yttria-tetragonal zirconia polycrystal, Int J Adhes Adhes, 62, 32, 10.1016/j.ijadhadh.2015.06.008 Ahn, 2020, Effect of non-thermal atmospheric pressure plasma (NTP) and zirconia primer treatment on shear bond strength between Y-TZP and resin cement, Materials, 13 Ishii, 2015, Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding, Dent Mater J, 34, 91, 10.4012/dmj.2014-066 Rohr, 2022, A comprehensive in vitro study on the performance of two different strategies to simplify adhesive bonding, J Esthet Restor Dent, 34, 833, 10.1111/jerd.12903 Awad, 2022, 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing cleaner improves bond strength to contaminated monolithic zirconia: an in-vitro study, Materials, 15, 1023, 10.3390/ma15031023 Yan, 2021, Evaluating the bonding performance of a novel dual-curing composite cement to zirconia, J Adhes Dent, 23, 569 El-Wassefy, 2021, Effect of simultaneous sintering of bioglass to a zirconia core on properties and bond strength, Materials, 14 Feitosa, 2017, Bonding strategies to full-contour zirconia: zirconia pretreatment with piranha solution, glaze and airborne-particle abrasion, Int J Adhes Adhes, 77, 151, 10.1016/j.ijadhadh.2017.05.007 Mangione, 2019, Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning, J Adhes Sci Technol, 33, 1572, 10.1080/01694243.2019.1602903 LE, 2019, Bond strength between MDP-based cement and translucent zirconia, Dent Mater J, 38, 480, 10.4012/dmj.2018-194 Moon, 2016, Effects of airborne-particle abrasion protocol choice on the surface characteristics of monolithic zirconia materials and the shear bond strength of resin cement, Ceram Int, 42, 1552, 10.1016/j.ceramint.2015.09.104 Kwon, 2020, Influence of sandblasting particle size and pressure on resin bonding durability to zirconia: a residual stress study, Materials, 13, 1, 10.3390/ma13245629 Liu, 2020, Construction of a silicate-based epitaxial transition film on a zirconia ceramic surface to improve the bonding quality of zirconia restorations, RSC Adv, 10, 32476, 10.1039/D0RA04735J Pardo, 2016, Effect of different surface treatments on the bonds strength of a resin cement in zirconia frameworks, J Int Dent Med Res, 9, 1 Franco-Tabares, 2019, Chemical bonding to novel translucent zirconias: a mechanical and molecular investigation, J Adhes Dent, 21, 107 de Mendonça, 2019, Effect of aluminum oxide sandblasting, plasma application and their combination on the bond strength of resin cement to zirconia ceramics, Braz Dent Sci, 22, 275, 10.14295/bds.2019.v22i2.1721 Cheung, 2015, Zirconia surface treatments for resin bonding, J Adhes Dent, 17, 551 Kasraei, 2015, Effect of CO2 and Nd:YAG lasers on shear bond strength of resin cement to zirconia ceramic, J Dent, 12, 686 Petkosit, 2022, The effect of curing pressure on shear bond strength of zirconia to resin cement, Open Dent J, 15, 410, 10.2174/1874210602115010410 Negreiros, 2021, Adhesion of resin cement to zirconia using argon plasma and primer, Int J Prosthodont, 1 Liu, 2015, Effect of Nd: YAG laser irradiation on surface properties and bond strength of zirconia ceramics, Lasers Med Sci, 30, 627, 10.1007/s10103-013-1381-7 Paschoalino M., Paschoalino J., Carvalho L.A. De. Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resi 2019;33:1948–58. Zaia, 2015, Bond strenght of zirconia submitted to different surface treatments, Pesqui Bras Odontopediatria Clin Integr, 15, 387, 10.4034/PBOCI.2015.151.41 Cao, 2022, The effects of four primers and two cement types on the bonding strength of zirconia, Ann Transl Med, 10, 10.21037/atm-21-4909 Hjerppe, 2021, Effect of potassium hydrogen difluoride in zirconia-to-resin bonding, Dent Mater J, 40, 245, 10.4012/dmj.2019-389 Nogueira Alvim, 2018, Influence of plasma-based dry etching on the bond strength of Y-TZP ceramic, Gen Dent, 66, e11 Liu, 2015, Effects of some chemical surface modifications on resin zirconia adhesion, J Mech Behav Biomed Mater, 46, 23, 10.1016/j.jmbbm.2015.02.015 Emamieh, 2019, Effect of two universal adhesives on microshear bond strength of resin cement to zirconia, Dent Med Probl, 56, 245, 10.17219/dmp/109349 Renata Vasconcelos Monteiro. Effect of Universal Adhesives on Long-term Bond Strength to Zirconia. J Adhes n.d. https://doi.org/10.3290/j.jad.b3512333. Thammajaruk, 2019, Influence of glass-ceramic coating on composite zirconia bonding and its characterization, Dent Mater, 35, 105, 10.1016/j.dental.2018.11.001 Gresnigt, 2015, Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers, Dent Mater Scherrer, 2010, Direct comparison of the bond strength results of the different test methods: a critical literature review, Dent Mater, 26, e78, 10.1016/j.dental.2009.12.002 Quigley, 2021, Clinical efficacy of methods for bonding to zirconia: a systematic review, J Prosthet Dent, 125, 231, 10.1016/j.prosdent.2019.12.017 Armstrong, 2010, Adhesion to tooth structure: a critical review of “micro” bond strength test methods, Dent Mater, 26, 50, 10.1016/j.dental.2009.11.155 Inokoshi, 2013, Durable bonding to mechanically and/or chemically pre-treated dental zirconia, J Dent, 41, 170, 10.1016/j.jdent.2012.10.017 Otani, 2015, A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP, Dent Mater, 31, 648, 10.1016/j.dental.2015.03.002 Tiu, 2015, Clinical tooth preparations and associated measuring methods: a systematic review, J Prosthet Dent, 113, 175, 10.1016/j.prosdent.2014.09.007 Parker, 2004, Resistance form in tooth preparation, Dent Clin North Am, 48, 387, 10.1016/j.cden.2003.12.009 Kern, 2014, Bonding to oxide ceramics-Laboratory testing versus clinical outcome, Dent Mater, 31, 1 Shahdad, 2018, Clinical evaluation of all ceramic zirconia framework resin bonded bridges, Eur J Prosthodont Restor Dent, 203 Gale, 1999, Thermal cycling procedures for laboratory testing of dental restorations, J Dent, 27, 89, 10.1016/S0300-5712(98)00037-2 Blumer, 2015, A systematic approach to standardize artificial aging of resin composite cements, Dent Mater, 31, 855, 10.1016/j.dental.2015.04.015 Carek A., Dukaric K., Miler H., Marovic D., Tarle Z., Par M. Post-Cure Development of the Degree of Conversion and Mechanical Properties of Dual-Curing Resin Cements. Polymers (Basel). 2022;14:3649. doi: 10.3390/polym14173649. PMID: 36080725; PMCID: PMC9460751. Aguiar, 2011, The effects of exposure time on the surface microhardness of three dual-cured dental resin cements, Polymers, 3, 998, 10.3390/polym3030998 Mitchell, 1999, Fracture toughness of conventional, resin-modified glass-ionomer and composite luting cements, Dent Mater, 15, 7, 10.1016/S0109-5641(99)90024-6 Knobloch, 2000, Fracture toughness of resin-based luting cements, J Prosthet Dent, 83, 204, 10.1016/S0022-3913(00)80013-X Saade, 2020, Evaluation of the effect of different surface treatments, aging and enzymatic degradation on zirconia-resin micro-shear bond strength, Clin Cosmet Invest Dent, 12, 1, 10.2147/CCIDE.S219705 da Silva, 2014, Stability of the bond between two resin cements and an yttria-stabilized zirconia ceramic after six months of aging in water, J Prosthet Dent, 112, 568, 10.1016/j.prosdent.2013.12.003