Wood-derived copper–graphite composites produced via additive-assisted electrodeposition
Tài liệu tham khảo
Pappacena, 2010, Processing of wood-derived copper–silicon carbide composites via electrodeposition, Compos Sci Technol, 70, 485, 10.1016/j.compscitech.2009.12.019
Wilkes, 2008, Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a funcion of temperature, J Mater Res, 23, 1732, 10.1557/JMR.2008.0197
Shpeĭzman, 2009, Microplasticity of biomorphic SiC/Al composite under uniaxial compression, Phys Solid State, 51, 2458, 10.1134/S1063783409120051
Parfen’eva, 2010, Thermal conductivity of the pine-biocarbon-preform/copper composite, Phys Solid State, 52, 1348, 10.1134/S1063783410070048
Greil, 1998, Biomorphic cellular silicon carbide ceramics from wood: I. processing and microstructure, J Eur Ceram Soc, 18, 1961, 10.1016/S0955-2219(98)00156-3
Greil, 2001, Biomorphous ceramics from lignocellulosics, J Eur Ceram Soc, 21, 105, 10.1016/S0955-2219(00)00179-5
Kaul, 2006, Precursor selection and its role in the mechanical properties of porous SiC derived from wood, Mater Sci Eng A, 428, 225, 10.1016/j.msea.2006.05.033
Pappacena, 2010, Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition, Compos Sci Technol, 70, 478, 10.1016/j.compscitech.2009.11.011
Johnson, 2011, Catalytic graphitization of three-dimensional wood-derived porous scaffolds, J Mater Res, 26, 18, 10.1557/jmr.2010.88
Silvain, 2000, Interface characterization and wettability properties of carbon particles reinforced copper alloy, J Mater Chem, 10, 2213, 10.1039/b003836i
Ramqvist, 1965, Wetting of metallic carbides by liquid copper, nickel, cobalt and iron, Int J Powd Metall, 1, 2
Liu, 1989, Effects of alloying on the wettability of copper to carbon-fibers, ISIJ Int, 29, 568, 10.2355/isijinternational.29.568
Lowenheim, 1978
Dow, 2008, Through-hole filling by copper electroplating, J Electrochem Soc, 14, D750, 10.1149/1.2988134
Dow, 2009, Microvia filling by coper electroplating using diazine black as a leveler, Electrochim Acta, 54, 5894, 10.1016/j.electacta.2009.05.053
Moffat, 2000, Superconformal electrodeposition of copper in 500–90nm features, J Electrochem Soc, 147, 4524, 10.1149/1.1394096
Akolkar, 2009, Mechanistic analysis of the “bottom-up” fill in copper interconnect metallization, J Electrochem Soc, 156, D351, 10.1149/1.3156640
Johnson, 2013, Thermal conductivity of wood-derived graphite and copper–graphite composites produced via electrodeposition, Compos Part A: Appl Sci Manuf, 53, 182, 10.1016/j.compositesa.2013.06.009
Rasband WS. ImageJ, US National Institutes of Health, Bethesda, Maryland, USA, http://imagej.nih.gov/ij/; 1997–2012.
Stock, 1999, X-ray microtomography of materials, Int Mater Rev, 44, 141, 10.1179/095066099101528261
Stock, 2008, Recent advances in X-ray microtomography applied to materials, Int Mater Rev, 53, 129, 10.1179/174328008X277803
Dowd, 1999, Developments in synchrotron X-ray computed tomography at the national synchrotron light source, Proc SPIE, 3772, 224, 10.1117/12.363725
Hubbell, 1996
Kelly, 1999, Leveling and microstructural effects of additives for copper electrodeposition, J Electrochem Soc, 146, 2540, 10.1149/1.1391968
Lee, 2006, An approach to the development of organic additives for electrodeposition of narrow copper interconnects, J Electrochem Soc, 153, C521, 10.1149/1.2203098
Madore, 1996, Blocking inhibitors in cathodic leveling, J Electrochem Soc, 143, 3927, 10.1149/1.1837318
Moffat, 2005, Superconformal film growth: mechanism and quantification, IBM J Res Develop, 49, 19, 10.1147/rd.491.0019