Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties

Williams, 2016, Wire + arc additive manufacturing, Mater. Sci. Technol., 32, 641, 10.1179/1743284715Y.0000000073

Derekar, 2018, A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium, Mater. Sci. Technol., 34, 895, 10.1080/02670836.2018.1455012

Ding, 2015, Wire-feed additive manufacturing of metal components: technologies, developments and future interests, Int. J. Adv. Manuf. Technol., 81, 465, 10.1007/s00170-015-7077-3

Wu, 2019, Comparative study of 316L depositions by two welding current processes, Mater. Manuf. Process., 34, 1502, 10.1080/10426914.2019.1643473

Wang, 2019, The effects of fabrication atmosphere condition on the microstructural and mechanical properties of laser direct manufactured stainless steel 17–4 PH, J. Mater. Sci. Technol., 35, 1315, 10.1016/j.jmst.2019.03.009

Wu, 2018, A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement, J. Manuf. Process., 35, 127, 10.1016/j.jmapro.2018.08.001

Bajaj, 2020, Steels in additive manufacturing: a review of their microstructure and properties, Mater. Sci. Eng., A, 772, 138633, 10.1016/j.msea.2019.138633

Rafieazad, 2019, Microstructural evolution and mechanical properties of a low-carbon low-alloy steel produced by wire arc additive manufacturing, Int. J. Adv. Manuf. Technol., 105, 2121, 10.1007/s00170-019-04393-8

Le, 2020, A preliminary study on gas metal arc welding-based additive manufacturing of metal parts, Sci. Technol. Dev. J., 23, 422, 10.32508/stdj.v23i1.1714

Lu, 2017, Open-source wire and arc additive manufacturing system: formability, microstructures, and mechanical properties, Int. J. Adv. Manuf. Technol., 93, 2145, 10.1007/s00170-017-0636-z

Haden, 2017, Wire and arc additive manufactured steel: tensile and wear properties, Addit. Manuf., 16, 115

Chen, 2017, Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing, Mater. Sci. Eng., A, 703, 567, 10.1016/j.msea.2017.05.024

Wang, 2019, Correlation between arc mode, microstructure, and mechanical properties during wire arc additive manufacturing of 316L stainless steel, Mater. Sci. Eng., A, 751, 183, 10.1016/j.msea.2019.02.078

Gao, 2019, Location dependence of microstructure and mechanical properties on wire arc additively manufactured nuclear grade steel, Vacuum, 168, 108818, 10.1016/j.vacuum.2019.108818

Yilmaz, 2017, Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arc, Int. J. Adv. Manuf. Technol., 89, 13, 10.1007/s00170-016-9053-y

Abioye, 2017, Laser metal deposition of multi-track walls of 308LSi stainless steel, Mater. Manuf. Process., 32, 1660, 10.1080/10426914.2017.1292034

Li, 2020, Microstructure and mechanical properties of 308L stainless steel fabricated by laminar plasma additive manufacturing, Mater. Sci. Eng., A, 770, 138523, 10.1016/j.msea.2019.138523

Laghi, 2020, Experimental results for structural design of wire-and-arc additive manufactured stainless steel members, J. Constr. Steel Res., 167, 105858, 10.1016/j.jcsr.2019.105858

Laghi, 2020, Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing, Int. J. Adv. Manuf. Technol., 106, 3693, 10.1007/s00170-019-04868-8

Le, 2020, Effects of cooling conditions on the shape, microstructures, and material properties of SS308L thin walls built by wire arc additive manufacturing, Mater. Lett., 280, 128580, 10.1016/j.matlet.2020.128580

Dinovitzer, 2019, Effect of wire and arc additive manufacturing (WAAM) process parameters on bead geometry and microstructure, Addit. Manuf., 26, 138

de Oliveira, 2019, Response surface methodology for advanced manufacturing technology optimization: theoretical fundamentals, practical guidelines, and survey literature review, Int. J. Adv. Manuf. Technol., 104, 1785, 10.1007/s00170-019-03809-9

GM 308L, http://www.geelimited.com/product-details/Austenitic-Stainless-Steel-GMAW/GM-308L, n.d. (accessed December 2, 2020).

Pham, 2014, Estimation of microstructural compositions in the weld zone of structural steel using nanoindentation, J. Constr. Steel Res., 99, 121, 10.1016/j.jcsr.2014.04.011

Xiong, 2016, Forming appearance control of arc striking and extinguishing area in multi-layer single-pass GMAW-based additive manufacturing, Int. J. Adv. Manuf. Technol., 87, 579, 10.1007/s00170-016-8543-2

Xiong, 2015, Forming appearance analysis in multi-layer single-pass GMAW-based additive manufacturing, Int. J. Adv. Manuf. Technol., 80, 1767, 10.1007/s00170-015-7112-4

Jurić, 2019, Influence of shielding gas composition on structure and mechanical properties of wire and arc additive manufactured inconel 625, JOM, 71, 703, 10.1007/s11837-018-3151-2

Xiong, 2018, Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing, J. Mater. Process. Technol., 252, 128, 10.1016/j.jmatprotec.2017.09.020

Waqas, 2019, Optimization of process parameters to improve the effective area of deposition in GMAW-based additive manufacturing and its mechanical and microstructural analysis, Metals (Basel), 9, 775, 10.3390/met9070775

Fu, 2009, Microstructure evolution in AISI 304 stainless steel during near rapid directional solidification, Mater. Sci. Technol., 25, 1013, 10.1179/174328408X317093

Lippold, 2005

Lee, 2020, CMT-based wire arc additive manufacturing using 316l stainless steel: effect of heat accumulation on the multi-layer deposits, Metals (Basel), 10, 278, 10.3390/met10020278

Li, 2015, Microstructure evolution and mechanical properties of multiple-layer laser cladding coating of 308L stainless steel, Appl. Surf. Sci., 340, 143, 10.1016/j.apsusc.2015.02.171

Singh, 2002, Hall-Petch behaviour of 316L austenitic stainless steel at room temperature, Mater. Sci. Technol., 18, 165, 10.1179/026708301125000384

Skiba, 2009, Microstructure and mechanical properties of stainless steel component manufactured by shaped metal deposition, ISIJ Int., 49, 1588, 10.2355/isijinternational.49.1588

Wu, 2019, Forming process, microstructure, and mechanical properties of thin-walled 316L stainless steel using speed-cold-welding additive manufacturing, Metals (Basel), 9, 109, 10.3390/met9010109

Zhang, 2014, Characterization of stainless steel parts by laser metal deposition shaping, Mater. Des., 55, 104, 10.1016/j.matdes.2013.09.006