Well and reservoir characterization using combined temperature and pressure transient analysis: A case study

Dastkhan, 2021, An efficient numerical model for nonisothermal fluid flow through porous media, Can. J. Chem. Eng., 10.1002/cjce.24103 Unneland, 1994, Permanent downhole gauges used in reservoir management of complex North sea oil fields, SPE Prod. Facil., 9, 195, 10.2118/26781-PA Athichanagorn, 1999 Kin, 2000 Danis, 2014, Use of groundwater temperature data in geothermal exploration: the example of Sydney Basin, Australia, Hydrogeol. J., 22, 87, 10.1007/s10040-013-1070-4 Hawkes, 2001, Field data demonstrate thermal effects important in gas well pressure buildup tests, J. Can. Pet. Technol., 40, 54, 10.2118/01-11-04 Baker, 1990 App, 2009 Atkinson, 1977 Sagar, 1991, Predicting temperature profiles in a flowing well, SPE Prod. Eng., 6, 441, 10.2118/19702-PA Hasan, 1997, Development and application of a wellbore/reservoir simulator for testing oil wells, SPE Form. Eval., 12, 182, 10.2118/29892-PA Maubeuge, 1994 Bejan, 2013 Valiullin, 2004, A research into thermal field in fluid-saturated porous media, Powder Technol., 148, 72, 10.1016/j.powtec.2004.09.023 Yoshioka, 2007, Prediction of temperature changes caused by water or gas entry into a horizontal well, SPE Prod. Oper., 22, 425 Ramazanov, 2006, Temperature distribution in oil and water saturated reservoir with account of oil degassing, Oil Gas Bus. J., 1, 1 Ramazanov, 2013, Analytical model of temperature prediction for a given production history, Oil Gas Bus., 1 Sui, 2012, Determining multilayer formation properties from transient temperature and pressure measurements, Petrol. Sci. Technol., 30, 672, 10.1080/10916466.2010.514581 App, 2010, Nonisothermal and productivity behavior of high-pressure reservoirs, SPE J., 15, 50, 10.2118/114705-PA Duru, 2010, Modeling reservoir temperature transients and reservoir-parameter estimation constrained to the model, SPE Reservoir Eval. Eng., 13, 873, 10.2118/115791-PA Duru, 2011, Simultaneous interpretation of pressure, temperature, and flow-rate data using Bayesian inversion methods, SPE Reservoir Eval. Eng., 14, 225, 10.2118/124827-PA Mao, 2018, Temperature transient analysis for bounded oil reservoir under depletion drive, Int. J. Therm. Sci., 130, 457, 10.1016/j.ijthermalsci.2018.05.011 Mao, 2018, Accounting for fluid-property variations in temperature-transient analysis, SPE J., 23, 868, 10.2118/187465-PA Panini, 2019, An analytical solution and nonlinear regression analysis for sandface temperature transient data in the presence of a near-wellbore damaged zone, Transport Porous Media, 129, 779, 10.1007/s11242-019-01306-x Onur, 2017, Analysis of sandface-temperature-transient data for slightly compressible, single-phase reservoirs, SPE J., 22, 1 Chevarunotai, 2018, Transient flowing-fluid temperature modeling in reservoirs with large drawdowns, J. Pet. Explor. Prod. Technol., 8, 799, 10.1007/s13202-017-0397-0 Zhang, 2017, Improved analysis of transient temperature data from permanent down-hole gauges (PDGs), J. Geophys. Eng., 14, 739, 10.1088/1742-2140/aa66da Zheng, 2020, An integrated model for non-isothermal multi-phase flow, geomechanics and fracture propagation, J. Pet. Sci. Eng., 196 Zheng, 2019, Development of a fully implicit 3-D geomechanical fracture simulator, J. Pet. Sci. Eng., 179, 758, 10.1016/j.petrol.2019.04.065 Onur, 2017 Galvao, 2019, A coupled transient wellbore/reservoir-temperature analytical model, SPE J., 24, 2, 10.2118/195592-PA Y. Dastkhan and A. Kazemi, “The impact of isothermal flow assumption on accuracy of pressure transient analysis results,” Can. J. Chem. Eng., doi: https://doi.org/10.1002/cjce.24208.