Wedge indentation of thin films modelled by strain gradient plasticity

ABAQUS/Standard 6.7, 2006. Abaqus Users’ Manual. (www.simulia.com). Balint, 2006, Discrete dislocation plasticity analysis of wedge indentation of films, J. Mech. Phys. Solids, 54, 2281, 10.1016/j.jmps.2006.07.004 Bhattacharya, 1988, Finite element analysis of cone indentation, Int. J. Solids Struct., 27, 1047, 10.1016/0020-7683(91)90100-T Biwa, 1995, An analysis of fully plastic brinell indentation, J. Mech. Phys. Solids, 43, 1303, 10.1016/0022-5096(95)00031-D Carlsson, 2000, On frictional effects at inelastic contact between spherical bodies, Int. J. Mech. Sci., 42, 107, 10.1016/S0020-7403(98)00110-6 Chen, 2004, Size dependent nanoindentation of a soft film on a hard substrate, Acta Mater., 52, 1089, 10.1016/j.actamat.2003.10.039 Fleck, 2001, A reformulation of strain gradient plasticity, J. Mech. Phys. Solids, 49, 2245, 10.1016/S0022-5096(01)00049-7 Fredriksson, P., Gudmundson, P., Mikkelsen, L.P., 2008. Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites. Technical report No. 449, Department of Solid Mechanics, Royal Institute of Technology, Stockholm. Gao, 1999, Mechanism-based strain gradient plasticity – I. Theory, J. Mech. Phys. Solids, 47, 1239, 10.1016/S0022-5096(98)00103-3 Giannakopoulos, 1994, Analysis of Vickers indentation, Int. J. Solids Struct., 31, 2679, 10.1016/0020-7683(94)90225-9 Gudmundson, 2004, A unified treatment of strain gradient plasticity, J. Mech. Phys. Solids, 52, 1379, 10.1016/j.jmps.2003.11.002 Huang, 2000, Mechanism-based strain gradient plasticity – II Analysis, J. Mech. Phys. Solids, 48, 99, 10.1016/S0022-5096(99)00022-8 Johnson, 1970, The correlation of indentation experiments, J. Mech. Phys. Solids, 18, 115, 10.1016/0022-5096(70)90029-3 Johnson, 1985 Larsson, 2006, Modelling of sharp indentation experiments: some fundamental issues, Philos. Mag., 86, 5155, 10.1080/14786430600589089 Larsson, 1996, Analysis of Berkovich indentation, Int. J. Solids Struct., 33, 221, 10.1016/0020-7683(95)00033-7 Laursen, 1992, A study of the mechanics of microindentation using finite elements, J. Mater. Res., 7, 618, 10.1557/JMR.1992.0618 Mesarovic, 1999, Spherical indentation of elastic–plastic solids, Proc. Roy. Soc. London A, 455, 2707, 10.1098/rspa.1999.0423 Nix, 1998, Indentation size effects in crystalline materials: A law for strain gradient plasticity, J. Mech. Phys. Solids, 46, 411, 10.1016/S0022-5096(97)00086-0 Pethica, 1983, Hardness measurement at penetration depths as small as 20nm, Philos. Mag. A, 48, 593, 10.1080/01418618308234914 Saha, 2002, Effects of the substrate on the determination of thin film mechanical properties by nanoindentation, Acta Mater., 50, 23, 10.1016/S1359-6454(01)00328-7 Saha, 2001, Indentation of a soft metal film on a hard substrate: strain gradient hardening effects, J. Mech. Phys. Solids, 49, 1997, 10.1016/S0022-5096(01)00035-7 Swadener, 2002, The correlation of the indentation size effect measured with indenters of various shapes, J. Mech. Phys. Solids, 50, 681, 10.1016/S0022-5096(01)00103-X Tabor, 1951 Zhang, 2007, Indentation of a hard film on a soft substrate: strain gradient hardening effects, Int. J. Plast., 23, 25, 10.1016/j.ijplas.2006.02.011