Wear rate and fracture toughness of porous particle-filled phenol composites

Briscoe, 1981, Wear of polymers: an essay on fundamental aspects, Tribol Int, 14, 231, 10.1016/0301-679X(81)90050-5 Briscoe, 2002, Wear of polymers, Proc Inst Mech Engrs Part J: J Eng Trib, 2116, 401, 10.1243/135065002762355325 Bely, 1986 1986 Sinha, 2009, 10.1142/p560 Unuma, 2006, Preparation and characterization of glass-like carbon/silica composites from rice hull and phenolic resin, J Mat Sci, 41, 5593, 10.1007/s10853-006-0281-7 Nielsen, 1994 Adachi, 2008, Fracture toughness of nano- and micro-spherical silica-particle-filled epoxy composites, Acta Mater, 56, 2101, 10.1016/j.actamat.2008.01.002 Araki, 2011, Temperature dependence and fracture criterion of mixed mode I/II fracture toughness of phenolic resin for friction material, J Appl Polym Sci, 121, 2301, 10.1002/app.33939 Prasad, 1980, Abrasive wear of particle-filled polymers, J Mater Sci, 15, 1746, 10.1007/BF00550594 Blanchet, 1992, Sliding wear mechanics of polytetrafluoroethylene (ptfe) and ptfe composites, Wear, 153, 229, 10.1016/0043-1648(92)90271-9 Haxo, 1975, ground rice-hull ash as a filler for rubber, Rubber Chem Technol, 48, 271, 10.5254/1.3547453 Santiagoo, 2011, Mechanical properties, water absorption, and swelling behaviour of rice husk powder filled polypropylene/recycled acrylonitrile butadiene rubber (PP/NBRr/RHP) biocomposites using silane as a coupling agent, Bioresources, 6, 3714, 10.15376/biores.6.4.3714-3726 Zurina, 2004, Partial replacement of silica by rice husk powder in polystyrene-styrene butadiene rubber blends, J Reinf Plast Comp, 23, 1397, 10.1177/0731684404038611 Ismail, 2003, A comparative study on processing, mechanical properties, thermo-oxidative aging, water absorption, and morphology of, rice husk powder and silica fillers in polystyrene/styrene butadiene rubber blends, Polym-Plast Technol, 42, 81, 10.1081/PPT-120016337 Ismail, 2003, Polypropylene/silica/rice husk ash hybrid composites A study on the mechanical, water absorption and morphological properties, J Thermoplast Compos, 16, 121, 10.1177/0892705703016002871 Premalal, 2003, Effect of processing time on the tensile, morphological, and thermal properties of rice husk powder-filled polypropylene composites, Polym-Plast Technol, 42, 827, 10.1081/PPT-120024998 Siriwardena, 2003, A comparison of the mechanical properties and water absorption behavior of white rice husk ash and silica filled polypropylene composites, J Reinf Plast Comp, 22, 1645, 10.1177/073168403027619 Premalal, 2002, Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites, Polym Test, 21, 833, 10.1016/S0142-9418(02)00018-1 Siriwardena, 2002, Mechanical and morphological properties of white rice husk ash filled polypropylene/ethylene-propylene-diene terpolymer thermoplastic elastomer composites, J Appl Polym Sci, 85, 438, 10.1002/app.10713 Siriwardena, 2002, Mechanical properties and recyclability of thermoplastic elastomer composites of white rice husk ash-ethylene/propylene/diene terpolymer-polypropylene, Plast Rubber Compos, 31, 167, 10.1179/146580102225001418 Siriwardena, 2002, Water absorption behavior and its effect on tensile properties of ethylene-propylene-diene-terpolymer/polypropylene/filler ternary composites A preliminary study, Polym-Plast Technol, 41, 419, 10.1081/PPT-120004360 Ismail, 2001, Effect of a silane coupling agent on the properties of white rice husk ash-polypropylene/natural rubber composites, Polym Int, 50, 606, 10.1002/pi.673 Siriwardena, 2001, A comparison of white rice husk ash and silica as fillers in ethylene-propylene-diene terpolymer vulcanizates, Polym Int, 50, 707, 10.1002/pi.691 Chand, 2010, Tribology of maleic anhydride modified rice-husk filled polyvinylchloride, Wear, 269, 847, 10.1016/j.wear.2010.08.014 Khalf, 2010, Use of rice husks as potential filler in styrene butadiene rubber/linear low density polyethylene blends in the presence of maleic anhydride, Mater Des, 31, 2414, 10.1016/j.matdes.2009.11.056 Sarangi, 2011, Effect of temperature on nano-crystalline silica and carbon composites obtained from rice-husk ash, Compos Part B Eng, 42, 1994, 10.1016/j.compositesb.2011.05.026 Ahmad, 2012, Electron-beam-irradiated rice husk powder as reinforcing filler in natural rubber/high-density polyethylene (nr/hdpe) composites, Compos Part B Eng, 43, 3069, 10.1016/j.compositesb.2012.04.071 Chand, 2012, Influence of foaming agent on wear and mechanical properties of surface modified rice husk filled polyvinylchloride, Wear, 278, 83, 10.1016/j.wear.2012.01.002 Bohlooli, 2012, Experimental investigations and fuzzy logic modeling of compressive strength of geopolymers with seeded fly ash and rice husk bark ash, Compos Part B Eng, 43, 1293, 10.1016/j.compositesb.2012.01.012 Kwon, 2013, Enhancement of flexural properties and dimensional stability of rice husk particleboard using wood strands in face layers, Compos Part B Eng, 44, 728, 10.1016/j.compositesb.2012.01.045 Cndido, 2013, Poly(acrylamide-co-acrylate)/rice husk ash hydrogel composites. ii. temperature effect on rice husk ash obtention, Compos Part B Eng, 51, 246, 10.1016/j.compositesb.2013.03.027 Ghorbani, 2013, Removal of cod, color, anions and heavy metals from cotton textile wastewater by using polyaniline and polypyrrole nanocomposites coated on rice husk ash, Compos Part B Eng, 45, 1, 10.1016/j.compositesb.2012.09.035 Chauhan, 2013, Effects of particle size, particle loading and sliding distance on the friction and wear properties of cenosphere particulate filled vinylester composites, Mater Des, 51, 398, 10.1016/j.matdes.2013.03.071 Moloney, 1987, Parameters determining the strength and toughness of particulate filled epoxide resins, J Mater Sci, 22, 381, 10.1007/BF01160743 Rice, 2000 Bahadur, 2000, The development of transfer layers and their role in polymer tribology, Wear, 245, 92, 10.1016/S0043-1648(00)00469-5 Chateauminois, 2005, vol. 188, 10.1007/b136979 Ratner, 1964, Correlation between wear resistance of plastics and other mechanical properties, Sov Plast, 7, 37 Lancaster, 1968, Relationships between the wear of polymers and their mechanical properties, Proc Inst Mech Eng, 183, 98 Blanchet, 1995, A model for polymer composite wear behavior including preferential load support and surface accumulation of filler particulates, Trib Trans, 38, 821, 10.1080/10402009508983475