Wear of carbon fiber reinforced carbon matrix composites: Study of abrasive, oxidative wear and influence of humidity

Ozcan S. Microstructure–property–performance relationships of carbon-fiber-reinforced carbon composite friction materials. PHD Dissertation, Southern Illinois University. 2008. Krkoska, 2007 Bragg, 1928 Savage, 1945, Carbon brush contact films, Gen Electr Rev, 48, 13 Savage, 1948, Graphite lubrication, J Appl Phys, 19, 1, 10.1063/1.1697867 Savage, 1956, Vapor lubrication of graphite sliding contacts, J Appl Phys, 27, 136, 10.1063/1.1722322 Pardee, 1967, Moisture dependence of silver-graphite brushes in air, nitrogen, helium, and carbon dioxide, IEEE Trans Power App Syst, 86, 616, 10.1109/TPAS.1967.291739 Ramadanoff, 1944, High-altitude brush problem, Trans AIEE, 63, 825 Lancaster, 1981, The influence of environment and pressure on the transition to dusting wear of graphite, J Phys D, 14, 747, 10.1088/0022-3727/14/4/027 Campbell, 1948, Studies in boundary lubrication III. The wear of carbon brushes in dry atmospheres, Trans. ASME, 70, 491 Savage, 1951, Physically and chemically adsorbed films in the lubrication of graphite sliding contacts, Ann NY Acad Sci, 53, 862, 10.1111/j.1749-6632.1951.tb54242.x Rowe, 1960, Some observations on the frictional behavior of boron nitride and of graphite, Wear, 3, 274, 10.1016/0043-1648(60)90292-1 Bryant, 1964, A study of mechanisms of graphite friction and wear (lamellar solid lubrication based on hypothesis which correlates interlayer binding energy and frictional phenomena), Wear, 7, 118, 10.1016/0043-1648(64)90083-3 Bryant, 1965, Mechanisms of solid friction, Am J Phys, 33, 593, 10.1119/1.1971983 Arnell, 1968, Lattice parameters of graphite in relation to friction and wear, Nature, 218, 1155, 10.1038/2181155a0 Yen, 2004, Orgin of low-friction behavior in graphite investigated by surface x-ray diffraction, Appl Phys Lett, 84, 4702, 10.1063/1.1760597 Deacon, 1958, Lubrication by lamellar solids, Proc R Soc London, Ser A, 243, 464, 10.1098/rspa.1958.0013 Yen, 1996, Influence of water vapor and oxygen on the tribology of carbon materials with sp2 valence configuration, Wear, 192, 208, 10.1016/0043-1648(95)06807-4 Yen, 1996, An investigation of friction and wear mechanisms of carbon–carbon composites in nitrogen and air at elevated temperatures, Carbon, 34, 489, 10.1016/0008-6223(95)00205-7 Gouider, 2004, Mass spectrometry during C/C composite friction: carbon oxidation associated with high friction coefficient and high wear rate, Wear, 256, 1082, 10.1016/S0043-1648(03)00534-9 Kasem, 2007, Interdependence between wear process, size of detached particles and CO2 production during carbon/carbon composite friction, Wear, 263, 1220, 10.1016/j.wear.2007.01.077 Ozcan, 2009, Microstructure and elastic properties of individual components of C/C composites, Carbon, 47, 3403, 10.1016/j.carbon.2009.07.057 Ozcan, 2005, Frictional performance and local properties of C/C composites, Ceram Eng Sci Proc, 26, 127, 10.1002/9780470291283.ch16 Lancaster, 1975, Transitions in the friction and wear of carbons and graphites sliding against themselves, Tribol Trans, 18, 187 Blau, 1989 Blau, 1996 Ozcan S, Filip P. Influence of final heat treatment on microstructure and thermal properties of C/C composites. ASME-GSRIC Proceedings. Tulsa, OK; 2007. Gurung, 2007 Tezcan, 2008, Measurement and analytical validation of interfacial bond strength of PAN-fiber-reinforced carbon matrix composites, J Mater Sci, 43, 1612, 10.1007/s10853-007-2333-z Peszynska-Bialczyk K, Krkoska M, Pawliczek A, Filip P, Anderson K. Study of “adsorption/desorption” phenomena on friction debris of aircraft brakes. Developments in Advanced Ceramics and Composites: Ceramic Engineering and Science Proceedings. 2005:157–166. Peszynska-Bialczyk, 2007, Thermal analysis of bulk carbon–carbon composite and friction products derived from it during simulated aircraft braking, Carbon, 45, 524, 10.1016/j.carbon.2006.10.025 Farhang, 2009, The effect of wear groove on vibration and noise of aircraft brakes: theoretical and experimental evidence, SAE Int J Passenger Cars-Mech Syst, 1, 1223, 10.4271/2008-01-2557 Ozcan, 2004 Ozcan, 2007, Microstructure and thermal properties of 2 and 3 directionals C/C composites, Ceram Eng Sci Proc, 27, 233 Peszynska-Bialczyk, 2006, Activation energy of oxidation processes of carbon/carbon composites after applying different final heat treatment temperatures, Semi Annual Report; Center for Advanced Friction Studies-SIUC., 11, 1