Wear damage and effects of graphene-based lubricants/coatings during linear reciprocating sliding wear at high contact pressure

J. Hardell, B. Prakash, Tribological performance evaluation of cold pilgering lubricants, In: Proceedings of International Conference on Tribol Manufracturing Process. SE-971 87, 2010. Tribology in Cold Pilgering, Jens Hardell, Master thesis, Lulea University of Technology, 2005. Nilsson, 2011, The segmented expanding cone-mandrel test revisited as material characterization and component test for fuel claddings, Nucl. Eng. Des., 241, 445, 10.1016/j.nucengdes.2010.10.026 Saibaba, 2008, Fabrication of seamless calandria tubes by cold pilgering route using 3-pass and 2-pass schedules, J. Nucl. Mater., 383, 63, 10.1016/j.jnucmat.2008.08.045 Girard, 2001, Effect of plastic shearing on damage and texture on Zircaloy-4 cladding tubes: experimental and numerical study, J. Nucl. Mater., 294, 330, 10.1016/S0022-3115(00)00729-7 Sharma, 2009, Sliding wear and friction behaviour of zircaloy-4 in water, J. Nucl. Mater., 394, 151, 10.1016/j.jnucmat.2009.09.001 Bhushan, 2013 K.A.Y. V, 2014, Complexity of pilgering in nuclear applications, Int. J. Eng. Res. Appl., 4, 41 K. Miyoshi, Solid lubricants and coatings for extreme environments: State-of-the-Art Survey, NASA/TM −214688, 2007. Qiu, 2016, Investigation on MoS2 and graphite coatings and their effects on the tribological properties of the radial spherical plain bearings, Chin. J. Mech. Eng., 29, 844, 10.3901/CJME.2016.0331.043 Kim, 2011, Chemical vapor deposition-grown graphene: the thinnest solid lubricant, ACS Nano., 5, 5107, 10.1021/nn2011865 Lin, 2011, Modification of graphene platelets and their tribological properties as a lubricant additive, Tribol. Lett., 41, 209, 10.1007/s11249-010-9702-5 Sandoz-Rosado, 2012, An atomistic study of the abrasive wear and failure of graphene sheets when used as a solid lubricant and a comparison to diamond-like-carbon coatings, Carbon N. Y., 50, 4078, 10.1016/j.carbon.2012.04.055 Sonia, 2015, Insight into the mechanical integrity of few-layers graphene upon lithiation/delithiation via in situ monitoring of stress development, Carbon N. Y., 88, 206, 10.1016/j.carbon.2015.02.078 Sonia, 2017, Understanding the Li-storage in few layers graphene with respect to bulk graphite: experimental, analytical and computational study, J. Mater. Chem. A., 5, 8662, 10.1039/C7TA01978E Mukhopadhyay, 2008, Understanding influence of MoSi2 addition (5 wt%) on tribological properties of TiB2, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 39, 2998, 10.1007/s11661-008-9652-9 Nicholls, 2015, Crystal structure of the ZrO phase at zirconium/zirconium oxide interfaces, Adv. Eng. Mater., 17, 211, 10.1002/adem.201400133 Gabory, 2015, Transmission electron microscopy characterization of Zircaloy-4 and ZIRLO™ oxide layers, J. Nucl. Mater., 456, 272, 10.1016/j.jnucmat.2014.09.073 Jangid, 2017, Insights into the effects of multi-layered graphene as buffer/interlayer for a-Si during lithiation/delithiation, Carbon, 111, 602, 10.1016/j.carbon.2016.10.032 J.F. Shackelford, R.H. Doremus, Ceramic and glass materials: structure, properties and processing, Springer Science & Business Media, 12-Apr-2008 - Technology & Engineering. Mukhopadhyay, 2013, Ultra high temperature ceramics: processing, properties and applications, 68 Outokumpu HSC Chemistry® Version 5.1; Outokumpu Research Oy Information Service P.O. Box 60 FIN − 28101 PORI, Finland; 〈www.outokumpu.com/hsc〉.