Waste Printed Circuit Board (PCB) Recycling Techniques
Tóm tắt
Từ khóa
Tài liệu tham khảo
Gu Y, Wu Y, Xu M, Mu X, Zuo T (2016) Waste electrical and electronic equipment (WEEE) recycling for a sustainable resource supply in the electronics industry in China. J Clean Prod 127:331–338
Williams PT (2010) Valorization of printed circuit boards from waste electrical and electronic equipment by pyrolysis. Waste Biomass Valorization 1:107–120
Hadi P, Ning C, Ouyang W, Lin SK, Hui CW, Mckay G (2014) Conversion of an aluminosilicate-based waste material to high-value efficient adsorbent. Chem Eng J 256:415–420
Lee CH, Chang SL, Wang KM, Wen LC (2000) Management of scrap computer recycling in Taiwan. J Hazard Mater 73:209–220
Flandinet L, Tedjar F, Ghetta V, Fouletier J (2012) Metals recovering from waste printed circuit boards (WPCBs) using molten salts. J Hazard Mater 213–214:485–490
Quan C, Li A, Gao N (2013) Combustion and pyrolysis of electronic waste: thermogravimetric analysis and kinetic model. Procedia Environ Sci 18:776–782
Draft proposal for a European parliament and council directive on waste electric and electronic equipment. Brussels
Ghosh B, Ghosh MK, Parhi P, Mukherjee PS, Mishra BK (2015) Waste printed circuit boards recycling: an extensive assessment of current status. J Clean Prod 94:5–19
He Y, Xu Z (2014) The status and development of treatment techniques of typical waste electrical and electronic equipment in China: a review. Waste Manag Res 32:254–269
Kumari A, Kumari A, Jha MK, Kumar V, Singh RP, Yoo K (2014) Copper recovery from small devices populated on waste printed circuit boards. J Metall Mater Sci 56:41–51
Zeng X, Zheng L, Xie H, Lu B, Xia K, Chao K, Li W, Yang J, Lin S, Li J (2012) Current status and future perspective of waste printed circuit boards recycling. Procedia Environ Sci 16:590–597
Das A, Vidyadhar A, Mehrotra SP (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour Conserv Recycl 53:464–469
Hadi P, Ning C, Ouyang W, Xu M, Lin SK, McKay G (2014) Toward environmentally-benign utilization of nonmetallic fraction of waste printed circuit boards as modifier and precursor. Waste Manag 35:236–246
Akcil A, Erust C, Gahan CS, Ozgun M, Sahin M, Tuncuk A (2015) Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants—a review. Waste Manag 45:258–271
De Marco I, Caballero BM, Chomôn MJ, Laresgoiti MF, Torres A, Fernández G, Arnaiz S (2008) Pyrolysis of electrical and electronic wastes. J Anal Appl Pyrolysis 82:179–183
Jie G, Ying-Shun L, Mai-Xi L (2008) Product characterization of waste printed circuit board by pyrolysis. J Anal Appl Pyrolysis 83:185–189
Marsanich K, Zanelli S, Barontini F, Cozzani V (2004) Evaporation and thermal degradation of tetrabromobisphenol A above the melting point. Thermochim Acta 421:95–103
Luda MP, Balabanovich AI, Hornung A, Camino G (2003) Thermal degradation of a brominated bisphenol a derivative. Polym Adv Technol 14:741–748
Li J, Lu H, Liu S, Xu Z (2008) Optimizing the operating parameters of corona electrostatic separation for recycling waste scraped printed circuit boards by computer simulation of electric field. J Hazard Mater 153:269–275
Insititute of scrap recycling industries Inc. (2003) Scrap recycling: where tomorrow begins. Washington DC, USA
Heath JA, Jeffrey MI, Zhang HG, Rumball JA (2008) Anaerobic thiosulfate leaching: development of in situ gold leaching systems. Miner Eng 21:424–433
Yen W T XC (2008) Effects of copper minerals on ammionical thiosulfate leaching of gold. Proceeding XX IV Int. Miner. Process. Congr.
Ilyas S, Anwar MA, Niazi SB, Afzal Ghauri M (2007) Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy 88:180–188
Faramarzi MA, Stagars M, Pensini E et al (2004) Metal solubilization from metal-containing solid materials by cyanogenic Chromobacterium violaceum. J Biotechnol 113:321–326
Choi M-S, Cho K-S, Kim D-JD-S, Kim D-JD-S (2004) Microbial recovery of copper from printed circuit boards of waste computer by Acidithiobacillus ferrooxidans. J Environ Sci Heal Part A- Toxic/Hazardous Subst Environ Eng 39:2973–2982
Duan C, Sheng C, Wu L, Zhao Y, He J, Zhou E (2014) Separation and recovery of fine particles from waste circuit boards using an inflatable tapered diameter separation bed. Sci World
Shapiro M, Galperin V (2005) Air classification of solid particles: a review. Chem Eng Process Process Intensif 44:279–285
RI S (1996) Recycling and resources recovery engineering. Springer, Berlin
Li J, Xu Z, Zhou Y (2007) Application of corona discharge and electrostatic force to separate metals and nonmetals from crushed particles of waste printed circuit boards. J Electrostat 65:233–238
Guo J, Cao B, Guo J, Xu Z (2008) A plate produced by nonmetallic materials of pulverized waste printed circuit boards. Environ Sci Technol 42:5267–5271
Guo J, Guo J, Cao B, Tang Y, Xu Z (2009) Manufacturing process of reproduction plate by nonmetallic materials reclaimed from pulverized printed circuit boards. J Hazard Mater 163:1019–1025
Yokoyama S, Iji M (1995) Recycling of thermosetting plastic waste from electronic component production processes. In: Proceedings 1995 IEEE Int. Symp., pp 132–137
Mou P, Xiang DDG (2007) Products made from nonmetallic materials reclaimed from waste printed circuit boards. Tsinghua Sci Technol 12:276–283
Ban BC, Song JY, Lim JY, Wang SK, An KG, Kim DS (2005) Studies on the reuse of waste printed circuit board as an additive for cement mortar. J Env Sci Heal A Tox Hazard Subst Env Eng 40:645–656
Goosey M, Kellner R (2003) Recycling technologies for the treatment of end of life printed circuit boards (PCBs). Circuit World 29:33–37
Hadi P, Ning C, Ouyang W, Lin SK, Hui CW, McKay G (2014) Conversion of an aluminosilicate-based waste material to high-value efficient adsorbent. Chem Eng J 256:415–420
Hu SH, Wu JY, Yen FS, Tsai MS (2006) Alkaline leaching of printed circuit board sludge. Environ Prog 25:243–250
Cui J, Forssberg E (2003) Mechanical recycling of waste electric and electronic equipment: a review. J Hazard Mater 99:243–263
Huang K, Guo J, Xu Z (2009) Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. J Hazard Mater 164:399–408
Hall WJ, Williams PT (2007) Separation and recovery of materials from scrap printed circuit boards. Resour Conserv Recycl 51:691–709
Yamane LH, de Moraes VT, Espinosa DCR, Tenório JAS (2011) Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. Waste Manag 31:2553–2558
Hadi P, Xu M, Lin CSK, Hui CW, McKay G (2015) Waste printed circuit board recycling techniques and product utilization. J Hazard Mater 283:234–243
Menad N, Björkman B, Allain EG (1998) Combustion of plastics contained in electric and electronic scrap. Resour Conserv Recycl 24:65–85
Malhotra SC (1985) Trends and opportunities in electronic scrap reclamation. Conserv Recycl 8:327–333
Vijayaram R, Nesakumar D, Chandramohan K (2013) Copper extraction from the discarded printed circuit boards by leaching. Res J Eng Sci 2:11–14
Jha MK, Kumari A, Choubey PK, Lee JC, Kumar V, Jeong J (2012) Leaching of lead from solder material of waste printed circuit boards (PCBs). Hydrometallurgy 121–124:28–34
Chancerel P, Rotter S (2009) Recycling-oriented characterization of small waste electrical and electronic equipment. Waste Manag 29:2336–2352
Zhou Y, Qiu K (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater 175:823–828
Park YJ, Fray DJ (2009) Recovery of high purity precious metals from printed circuit boards. J Hazard Mater 164:1152–1158
Evangelopoulos P, Kantarelis E, Yang W (2015) Investigation of the thermal decomposition of printed circuit boards (PCBs) via thermogravimetric analysis (TGA) and analytical pyrolysis (Py-GC/MS). J Anal Appl Pyrolysis 115:337–343
Fogarasi S, Imre-Lucaci F (2014) Copper recovery and gold enrichment from waste printed circuit boards by mediated electrochemical oxidation. J Hazard Mater 273:215–221
Behnamfard A, Salarirad MM, Veglio F (2013) Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation. Waste Manag 33:2354–2363
Silvas FPC, Jiménez Correa MM, Caldas MPK, Moraes VT, Espinosa DCR, Tenório JAS (2015) Printed circuit board recycling: physical processing and copper extraction by selective leaching. Waste Manag 46:503–510
Xing M, Zhang FS (2013) Degradation of brominated epoxy resin and metal recovery from waste printed circuit boards through batch sub/supercritical water treatments. Chem Eng J 219:131–136
Calgaro CO, Schlemmer DF, da Silva MDCR et al (2015) Fast copper extraction from printed circuit boards using supercritical carbon dioxide. Waste Manag 45:289–297
He W, Li G, Ma X, Wang H, Huang J, Xu M, Huang C (2006) WEEE recovery strategies and the WEEE treatment status in China. J Hazard Mater 136:502–512
Yoo JM, Jeong J, Yoo K, Lee JC, Kim W (2009) Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill. Waste Manag 29:1132–1137
Hadi P, Ning C, Kubicki JD, Mueller K, Fagan JW, Luo ZT, Weng LT, McKay G (2016) Sustainable development of a surface-functionalized mesoporous aluminosilicate with ultra-high ion exchange efficiency. Inorg Chem Front 3:502–513
Li J, Duan H, Yu K, Liu L, Wang S (2010) Characteristic of low-temperature pyrolysis of printed circuit boards subjected to various atmosphere. Resour Conserv Recycl 54:810–815
Kopacek B, Kopacek P (2015) Extracting rare materials from electr(on)ic scrap. IFAC-PapersOnLine 48:157–161
Lindberg SE, Wallschläger D, Prestbo EM, Bloom NS, Price J, Reinhart D (2001) Methylated mercury species in municipal waste landfill gas sampled in Florida, USA. Atmos Environ 35:4011–4015
Spalvins E, Dubey B, Townsend T (2008) Impact of electronic waste disposal on lead concentrations in landfill leachate. Environ Sci Technol 42:7452–7458
Osako M, Kim YJ, Sakai SI (2004) Leaching of brominated flame retardants in leachate from landfills in Japan. Chemosphere 57:1571–1579
Wong CSC, Wu SC, Duzgoren-Aydin NS, Aydin A, Wong MH (2007) Trace metal contamination of sediments in an e-waste processing village in China. Environ Pollut 145:434–442
Kang HY, Schoenung JM (2005) Electronic waste recycling: a review of US infrastructure and technology options. Resour Conserv Recycl 45:368–400
Kang HY, Schoenung JM (2006) Economic analysis of electronic waste recycling: modeling the cost and revenue of a materials recovery facility in California. Environ Sci Technol 40:1672–1680
Davis G, Herat S (2008) Electronic waste: the local government perspective in Queensland, Australia. Resour Conserv Recycl 52:1031–1039
USEPA (US (2007) Management of Electronic Waste in the United States
Guo J, Guo J, Xu Z (2009) Recycling of non-metallic fractions from waste printed circuit boards: a review. J Hazard Mater 168:567–590
Komilis D, Evangelou A, Giannakis G, Lymperis C (2012) Revisiting the elemental composition and the calorific value of the organic fraction of municipal solid wastes. Waste Manag 32:372–381
Oguchi M, Sakanakura H, Terazono A (2013) Toxic metals in WEEE: characterization and substance flow analysis in waste treatment processes. Sci Total Environ 463–464:1124–1132
Tange L, Drohmann D (2005) Waste electrical and electronic equipment plastics with brominated flame retardants—from legislation to separate treatment—thermal processes. Polym Degrad Stab 88:35–40
Long YY, Feng YJ, Cai SS, Ding WX, Shen DS (2013) Flow analysis of heavy metals in a pilot-scale incinerator for residues from waste electrical and electronic equipment dismantling. J Hazard Mater 261:427–434
Duan H, Li J, Liu Y, Yamazaki N, Jiang W (2011) Characterization and inventory of PCDD/Fs and PBDD/Fs emissions from the incineration of waste printed circuit board. Environ Sci Technol 45:6322–6328
Sakai SI, Watanabe J, Honda Y, Takasuki H, Aoki I, Futamatsu M, Shiozaki K (2001) Combustion of brominated flame retardants and behavior of its byproducts. Chemosphere 42:519–531
Ni M, Xiao H, Chi Y, Yan J, Buekens A (2012) Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace. Waste Manag 32:568–574
Oguchi M, Sakanakura H, Terazono A, Takigami H (2012) Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process. Waste Manag 32:96–103
Bidini G, Fantozzi F, Bartocci P, D’Alessandro B, D’Amico M, Laranci P, Scozza E, Zagaroli M (2015) Recovery of precious metals from scrap printed circuit boards through pyrolysis. J Anal Appl Pyrolysis 111:140–147
Yang X, Sun L, Xiang J, Hu S, Su S (2013) Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review. Waste Manag 33:462–473
Ortuño N, Conesa JA, Moltó J, Font R (2014) Pollutant emissions during pyrolysis and combustion of waste printed circuit boards, before and after metal removal. Sci Total Environ 499:27–35
Barontini F, Marsanich K, Petarca L, Cozzani V (2004) The thermal degradation process of tetrabromobisphenol A. Ind Eng Chem Res 43:1952–1961
Barontini F, Cozzani V, Marsanich K, Raffa V, Petarca L (2004) An experimental investigation of tetrabromobisphenol A decomposition pathways. J Anal Appl Pyrolysis 72:41–53
Lai YC, Lee WJ, Li HW, Wang LC, Ping G, Chien C (2007) Inhibition of polybrominated dibenzo-p-dioxin and dibenzofuran formation from the pyrolysis of printed circuit boards. Environ Sci Technol 41:957–962
Kim YM, Han TU, Watanabe C, Teramae N, Park YK, Kim S, Hwang B (2015) Analytical pyrolysis of waste paper laminated phenolic-printed circuit board (PLP-PCB). J Anal Appl Pyrolysis 115:87–95
Kumari A, Jha MK, Lee JC, Singh RP (2016) Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs. J Clean Prod 112:4826–4834
Terakado O, Ohhashi R, Hirasawa M (2013) Bromine fixation by metal oxide in pyrolysis of printed circuit board containing brominated flame retardant. J Anal Appl Pyrolysis 103:216–221
Guo X, Qin FGF, Yang X, Jiang R (2014) Study on low-temperature pyrolysis of large-size printed circuit boards. J Anal Appl Pyrolysis 105:151–156
Cayumil R, Khanna R, Rajarao R, Mukherjee PS, Sahajwalla V (2015) Concentration of precious metals during their recovery from electronic waste. Waste Manag 57:121–130
Benallal B, Roy C, Pakdel H, Chabot S, Poirier MA (1995) Characterization of pyrolytic light naphtha from vacuum pyrolysis of used tyres. Comparison with petroleum naphtha. Fuel 74:1589–1594
Long L, Sun S, Zhong S, Dai WC, Liu JY, Song WF (2010) Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards. J Hazard Mater 177:626–632
Wu W, Qiu K (2015) Vacuum co-pyrolysis of Chinese fir sawdust and waste printed circuit boards. Part II: influence of heating conditions. J Anal Appl Pyrolysis 111:216–223
Zhou Y, Wu W, Qiu K (2010) Recovery of materials from waste printed circuit boards by vacuum pyrolysis and vacuum centrifugal separation. Waste Manag 30:2299–2304
Mitan NMM, Bhaskar T, Hall WJ, Muto A, Williams PT (2008) Effect of decabromodiphenyl ether and antimony trioxide on controlled pyrolysis of high-impact polystyrene mixed with polyolefins. Chemosphere 72:1073–1079
Havlik T, Orac D, Petranikova M, Miskufova A (2011) Hydrometallurgical treatment of used printed circuit boards after thermal treatment. Waste Manag 31:1542–1546
Liu JY, Duan NYHY (2010) Study on the metals dissolving from waste printed circuit boards by using nitric acid as leaching liquor. Environ Pollut Control 12:35–38
Jun W, Liang C, Lijuan LQ (2008) Study on selectively leaching gold from waste printed circuit boards with thiourea. Gold 6:17
Kinoshita T, Akita S, Kobayashi N, Nii S, Kwaizumi F, Takahashi K (2003) Metal recovery from non-mounted printed wiring boards via hydrometallurgical processing. Hydrometallurgy 69:73–79
Qiu KQ, Gu HCS (2008) Characteristics of metals resources and status of hydrometallurgical processes for recycling metals from waste printed circuit boards. Chinese J Nonferrous Met 18:s381–s385
Mankhand TR, Singh KK, Gupta SK, Das S (2013) Pyrolysis of printed circuit boards. Int J Metall Eng 1:102–107
Mecucci A, Scott K (2002) Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards. J Chem Technol Biotechnol 77:449–457
Sheng PP, Etsell TH (2007) Recovery of gold from computer circuit board scrap using aqua regia. Waste Manag Res 25:380–383
Chmielewski AG, Urbański TS, Migdał W (1997) Separation technologies for metals recovery from industrial wastes. Hydrometallurgy 45:333–344
Zhou QFZW (2003) Recovery of gold from waste computer and its accessories. China Resour Compr Util 7:31–35
Quinet P, Proost J, Lierde A Van (2005) Minerals and Metallurgical Processing, 22 (1):17. 994740
Becker E, Knothe MLJ (1983) Gold recovery from non-metallic secondary raw materials by leaching with thiourea and adsorption on ion exchangers. Hydrometallurgy 3:265–275
Xu XL LJ (2011) Experimental study of thiourea leaching gold and silver from waste circuit boards. J Qingdao Univ (E&T), 69–73
Moore DM, Zhang XR, Li CX. (2005) Using thiosulfate as a leach reagents instead of cyanide. Met Ore Dress Abroad 5–12
Ha VH, Lee J, Jeong J, Hai HT, Jha MK (2010) Thiosulfate leaching of gold from waste mobile phones. J Hazard Mater 178:1115–1119
Abbruzzese C, Fornari P, Massidda R, Vegliò F, Ubaldini S (1995) Thiosulphate leaching for gold hydrometallurgy. Hydrometallurgy 39:265–276
Xu Q, Chen DH, Chen L, Huang M (2010) Gold leaching from waste printed circuit board by iodine process. Nonferrous Met. 3:335–343
Birloaga I, De Michelis I, Ferella F, Buzatu M, Vegliò F (2013) Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery. Waste Manag 33:935–941
Devecci H. (2010) Extraction of copper from scrap TV boards by sulphuric acid leaching under oxidising conditions. In: GOING GREEN-CARE Innov. 2010 Conf. Vienna, p 45
Kumari A, Jha MK, Singh RP (2015) Recovery of metals from pyrolysed PCBs by hydrometallurgical techniques. Hydrometallurgy 165:97–105
Havlik T, Orac D, Petranikova M, Miskufova A, Kukurugya F, Takacova Z (2010) Leaching of copper and tin from used printed circuit boards after thermal treatment. J Hazard Mater 183:866–873
Kim EY, Kim MS, Lee JC, Pandey BD (2011) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. J Hazard Mater 198:206–215
Bosecker K (1997) Bioleaching: metal solubilization by microorganisms. FEMS Microbiol Rev 20:591–604
Morris PJ, Quensen JF, Tiedje JM, Boyd SA (1992) Reductive debromination of the commercial polybrominated biphenyl mixture Firemaster BP6 by anaerobic microorganisms from sediments. Appl Environ Microbiol 58:3249–3256
Liang G, Tang J, Liu W, Zhou Q (2013) Optimizing mixed culture of two acidophiles to improve copper recovery from printed circuit boards (PCBs). J Hazard Mater 250–251:238–245
Ilyas S, Ruan C, Bhatti HN, Ghauri MH, Anwar MH (2010) Column bioleaching of metals from electronic scrap. Hydrometallurgy 101:135–140
Yang T, Xu Z, Wen J, Yang L (2009) Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans. Hydrometallurgy 97:29–32
Yen-Peng Ting, Chi Chong Tan VAP (2008) Cyanide-generating bacteria for gold recovery from electronic scrap material. J Biotechnol 136:S653–S654
Marhual NP, Pradhan N, Kar RN, Sukla LB, Mishra BK (2008) Differential bioleaching of copper by mesophilic and moderately thermophilic acidophilic consortium enriched from same copper mine water sample. Bioresour Technol 99:8331–8336
Sampson MI, Phillips CV (2001) Influence of base metals on the oxidizing ability of acidophilic bacteria during the oxidation of ferrous sulfate and mineral sulfide concentrates, using mesophiles and moderate thermophiles. Miner Eng 14:317–340
Brandl H, Bosshard R, Wegmann M (1999) Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi. Process Metall 9:569–576
Zhu N, Xiang Y, Zhang T, Wu P, Dang Z, Li P, Wu J (2011) Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bacteria. J Hazard Mater 192:614–619
Search H, Journals C, Contact A, DC Arc Plasma Disposal of Printed Circuit Board * System of the DC arc plasma disposal of solid waste. 2423
Liu K, Zhang Z, Zhang F-S (2016) Advanced degradation of brominated epoxy resin and simultaneous transformation of glass fiber from waste printed circuit boards by improved supercritical water oxidation processes. Waste Manag 56:423–430
Wang H, Hirahara M, Goto M, Hirose T (2004) Extraction of flame retardants from electronic printed circuit board by supercritical carbon dioxide. J Supercrit Fluids 29:251–256
Xiu FR, Zhang FS (2010) Materials recovery from waste printed circuit boards by supercritical methanol. J Hazard Mater 178:628–634
Xiu F-R, Weng H, Qi Y, Yu G, Zhang Z, Zhang FS (2016) A novel reutilization method for waste printed circuit boards as flame retardant and smoke suppressant for poly (vinyl chloride). J Hazard Mater 315:102–109
Xiu FR, Qi Y, Zhang FS (2015) Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment. Waste Manag 41:134–141
Xiu FR, Zhang FS (2012) Size-controlled preparation of Cu2O nanoparticles from waste printed circuit boards by supercritical water combined with electrokinetic process. J Hazard Mater 233–234:200–206
Xiu FR, Zhang FS (2009) Preparation of nano-Cu2O/TiO2 photocatalyst from waste printed circuit boards by electrokinetic process. J Hazard Mater 172:1458–1463
Sanyal S, Ke Q, Zhang Y, Ngo T, Carrell J, Zhang H, Dai l (2013) Understanding and optimizing delamination/recycling of printed circuit boards using a supercritical carbon dioxide process. J Clean Prod 41:174–178
Xing M, Zhang F (2012) A novel process for detoxification of BERs in waste {PCBs}. Procedia Environ Sci 16:491–494
Yin J, Li G, He W, Huang J, Xu M (2011) Hydrothermal decomposition of brominated epoxy resin in waste printed circuit boards. J Anal Appl Pyrolysis 92:131–136
Sarvar M, Salarirad MM, Shabani MA (2015) Characterization and mechanical separation of metals from computer printed circuit boards (PCBs) based on mineral processing methods. Waste Manag 45:246–257
Eswaraiah C, Kavitha T, Vidyasagar S, Narayanan SS (2008) Classification of metals and plastics from printed circuit boards (PCB) using air classifier. Chem Eng Process Process Intensif 47:565–576
Habib M, Miles NJ, Hall P (2013) Recovering metallic fractions from waste electrical and electronic equipment by a novel vibration system. Waste Manag 33:722–729
Kumar V, Lee J, Jeong J, Jha MK, Kim BS, Singh R (2015) Recycling of printed circuit boards (PCBs) to generate enriched rare metal concentrate. J Ind Eng Chem 21:805–813
Zhang S, Forssberg E, Arvidson B, Moss W (1998) Aluminum recovery from electronic scrap by high-force eddy-current separators. Resour Conserv Recycl 23:225–241
WL. D (1990) Practical applications of eddy current separators in the scrap recycling industry. Second Int. Symp. Met. Eng. Mater
Li J, Lu H, Guo J, Xu Z, Zhou Y (2007) Recycle technology for recovering resources and products from waste printed circuit boards. Environ Sci Technol 41:1995–2000
Jiang W, Jia L, Zhen-ming X (2009) A new two-roll electrostatic separator for recycling of metals and nonmetals from waste printed circuit board. J Hazard Mater 161:257–262
Zhao M, Li J, Yu K, Zhu F, Wen X (2006) Measurement of pyrolysis contamination during crushing of waste printed circuit boards. J Tsinghua Univ Technol 46:1995–1998
Guo J, Li J, Rao Q, Xu Z (2008) Phenolic molding compound filled with nonmetals of waste PCBs. Environ Sci Technol 42:624–628
Guo J, Rao Q, Xu Z (2008) Application of glass-nonmetals of waste printed circuit boards to produce phenolic moulding compound. J Hazard Mater 153:728–734
Zheng Y, Shen Z, Cai C, Ma S, Xing Y (2009) The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. J Hazard Mater 163:600–606
Niu X, Li Y (2007) Treatment of waste printed wire boards in electronic waste for safe disposal. J Hazard Mater 145:410–416
Lu MX, Zhou CH, Liu WL (2000) The study of recovering waste printed circuit board by mechanical method. Tech Equip Environ Pollut Control 10:30–35
Ke YH, Yang ET, Liu X, Liu CL, Dong WS (2013) Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation. Xinxing Tan Cailiao/New Carbon Mater 28:108–114
Rajagopal RR, Aravinda LS, Rajarao R, Bhat BR, Sahajwalla V(2016) Activated carbon derived from non-metallic printed circuit board waste for supercapacitor application. Electrochim Acta 211:488–498
Hadi P, Barford J, McKay G (2013) Toxic heavy metal capture using a novel electronic waste-based material-mechanism, modeling and comparison. Environ Sci Technol 47:8248–8255
Xu M, Hadi P, Chen G, McKay G (2014) Removal of cadmium ions from wastewater using innovative electronic waste-derived material. J Hazard Mater 273:118–123
Ning C, Hadi P, Lin CSK, McKay G (2016) Valorization of an electronic waste-derived aluminosilicate—surface functionalization and porous structure tuning. ACS Sustain Chem Eng 6:2980–2989
Pimenta S, Pinho ST (2011) Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. Waste Manag 31:378–392
Burke A (2007) R&D considerations for the performance and application of electrochemical capacitors. Electrochim Acta 53:1083–1091
Ludwig Christian, Hellweg Stefanie, Samuel Stucki E (2012) Municipal solid waste management: strategies and technologies for sustainable solutions. Springer, Berlin