WEDM of Al/SiC/Ti composite: A hybrid approach of RSM-ARAS-TLBO algorithm

Ahamed, 2010, Drilling of hybrid Al-5% SiCp-5% B4Cp metal matrix composites, Int. J. Adv. Manuf. Technol., 49, 871, 10.1007/s00170-009-2453-5

Zhou, 1997, Casting of SiC reinforced metal matrix composites, J. Mater. Process. Technol., 63, 358, 10.1016/S0924-0136(96)02647-7

Azimi, 2015, Mechanically alloyed Al7075–TiC nanocomposite: powder processing, consolidation and mechanical strength, Mater. Des., 66, 137, 10.1016/j.matdes.2014.10.046

Shorowordi, 2006, Tribo-surface characteristics of Al–B4C and Al–SiC composites worn under different contact pressures, Wear, 261, 634, 10.1016/j.wear.2006.01.023

Kalaiselvan, 2011, Production and characterization of AA6061–B4C stir cast composite, Mater. Des., 32, 4004, 10.1016/j.matdes.2011.03.018

Amini, 2011, Optimization of process parameters in wire electrical discharge machining of TiB2 nanocomposite ceramic, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 225, 2220, 10.1177/0954405411412249

Majumder, 2022, Machinability assessment OF shape memory alloy nitinol during WEDM operation: application potential OF taguchi based AHP–DFA technique, Surf. Rev. Lett., 29, 2250002, 10.1142/S0218625X22500020

Kumar, 2018, GA-based optimisation using RSM in WEDM of Nimonic-90: a nickel-based super alloy, Int. J. Ind. Syst. Eng., 28

Sharma, 2021, Machining of Ti-6Al-4V biomedical alloy by WEDM: investigation and optimization of MRR and Rz using grey-harmony search, World J. Eng., 10.1108/WJE-05-2021-0278

Sharma, 2022, Development of quality microholes by electrical discharge drilling on Al/SiC composite using of grey-desirability approach, Int. J. Light. Mater. Manuf., 5, 267

Gupta, 2015, Experimental determination for optimal setting OF parameters OF EDM ON AL/SIC composite using integrated taguchi grey relational analysis, J. Mach. Form. Technol., 7, 103

Garg, 2010, Review of research work in sinking EDM and WEDM on metal matrix composite materials, Int. J. Adv. Manuf. Technol., 50, 611, 10.1007/s00170-010-2534-5

Fard, 2013, Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite, J. Manuf. Process., 15, 483, 10.1016/j.jmapro.2013.09.002

Bagherian Azhiri, 2014, Application of Taguchi, ANFIS and grey relational analysis for studying, modeling and optimization of wire EDM process while using gaseous media, Int. J. Adv. Manuf. Technol., 71, 279, 10.1007/s00170-013-5467-y

Shayan, 2013, Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co), J. Manuf. Process., 15, 644, 10.1016/j.jmapro.2013.05.001

Montgomery, 2017

Shandilya, 2012, Parametric optimization during wire electrical discharge machining using response surface methodology, Procedia Eng., 38, 2371, 10.1016/j.proeng.2012.06.283

Kumar, 2013, Investigation of machining parameters and surface integrity in wire electric discharge machining of pure titanium, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 227, 972, 10.1177/0954405413479791

Zhang, 2014, The multi-objective optimization of medium-speed WEDM process parameters for machining SKD11 steel by the hybrid method of RSM and NSGA-II, Int. J. Adv. Manuf. Technol., 70, 2097, 10.1007/s00170-013-5427-6

Raj, 2015, Empirical modelling and optimization of process parameters of machining titanium alloy by wire-EDM using RSM, Mater. Today Proc., 2, 1682, 10.1016/j.matpr.2015.07.096

Singh, 2020, Design, development and tribological characterization of Ti–6Al–4V/hydroxyapatite composite for bio-implant applications, Mater. Chem. Phys., 243, 122662, 10.1016/j.matchemphys.2020.122662

Kumar, 2019, EDM μ-drilling in Ti-6Al-7Nb: experimental investigation and optimization using NSGA-II, Int. J. Adv. Manuf. Technol., 104, 2727, 10.1007/s00170-019-04012-6

Abbas, 2019, Towards optimization of surface roughness and productivity aspects during high-speed machining of Ti-6Al-4V, Materials, 12, 10.3390/ma12223749

Khanna, 2019, Investigations of the effect of parameters on the CR and SR during Al6063/SiC/Ti at WEDM, Appl. Mech. Mater., 895, 181, 10.4028/www.scientific.net/AMM.895.181

Singh, 2018, Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM, J. Mech. Sci. Technol., 32, 10.1007/s12206-018-0105-5

Zavadskas, 2010, A new additive ratio assessment (ARAS) method in multicriteria decision-making, Technol. Econ. Dev. Econ., 16, 159, 10.3846/tede.2010.10

Rao, 2012, Teaching–learning-based optimization: an optimization method for continuous non-linear large scale problems, Inf. Sci., 183, 1, 10.1016/j.ins.2011.08.006

Rakić, 2014, Comparison of full factorial design, central composite design, and box-behnken design in chromatographic method development for the determination of fluconazole and its impurities, Anal. Lett., 47, 1334, 10.1080/00032719.2013.867503

Box, 1987

Sharma, 2020, Parametric optimization of EDD using RSM-Grey-TLBO-based MCDM approach for commercially pure titanium, Grey Syst. Theor. Appl., 10, 231, 10.1108/GS-01-2020-0008

Gostimirovic, 2012, Influence of discharge energy on machining characteristics in EDM, J. Mech. Sci. Technol., 26, 173, 10.1007/s12206-011-0922-x

Gu, 2012, Electrical discharge machining of Ti6Al4V with a bundled electrode, Int. J. Mach. Tool Manufact., 53, 100, 10.1016/j.ijmachtools.2011.10.002