WEDM Parameter Optimization for Silicon@r-GO/Magneisum Composite Using Taguchi Based GRA Coupled PCA
Tóm tắt
Từ khóa
Tài liệu tham khảo
Kavimani V, Prakash KS, Starvin MS, Kalidas B, Viswamithran V, Arun SR (2019) Tribo-surface characteristics and Wear behaviour of SiC@ r-GO/mg composite worn under varying control factor. Silicon:1–11
Kavimani V, Prakash KS (2018) Doping effect of SiC over graphene on dry sliding Wear behaviour of mg/SiC@ r-GO MMCs and its surface characterization. Silicon 10:2829–2843
Kavimani V, Prakash KS, Gunashri R, Sathish P (2018) Corrosion protection behaviour of r-GO/TiO2 hybrid composite coating on magnesium substrate in 3.5 wt.% NaCl. Prog Org Coat 125:358–364
Mohan Das Gandhi AG, Soorya Prakash K, Kavimani V (2018) Effect of r-GO/TiO2 hybrid composite as corrosion-protective coating on magnesium in Sulphur-based electrolyte. Anti-Corrosion Methods Mater 65:375–382
Kumarasamy SP, Vijayananth K, Thankachan T, Muthukutti GP (2017) Investigations on mechanical and machinability behavior of aluminum/flyash cenosphere/gr hybrid composites processed through compocasting. J Appl Res Technol 15:430–441
Kavimani V, Prakash KS (2017) Tribological behaviour predictions of r-GO reinforced mg composite using ANN coupled Taguchi approach. J Phys Chem Solids 110:409–419
Kavimani V, Soorya Prakash K, Arun Pandian M (2017) Influence of r-GO addition on enhancement of corrosion and wear behavior of AZ31 MMC. Appl Phys A Mater Sci Process 123. https://doi.org/10.1007/s00339-017-1118-8
Prakash KS, Gopal PM, Kavimani V (2017) Effect of rock dust, cenosphere and E-waste glass addition on mechanical, wear and machinability behaviour of Al 6061 hybrid composites. Indian J Eng Mater Sci 24:270–282
Ravikumar M, Reddappa HN, Suresh R (2018) Study on mechanical and Tribological characterization of Al 2 O 3/SiCp reinforced aluminum metal matrix composite. Silicon:1–11
Habibi MK, Hamouda a MS, Gupta M (2012) Enhancing tensile and compressive strength of magnesium using ball milled Al+CNT reinforcement. Compos Sci Technol 72:290–298. https://doi.org/10.1016/j.compscitech.2011.11.015
Rashad M, Pan F, Tang A, Asif M, Hussain S, Gou J, et al. Journal of industrial and engineering chemistry improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets ( Al + GNPs ) using semi powder metallurgy method 2014
Kavimani V, Prakash KS, Thankachan T (2019) Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics. Compos Part B Eng 167:621–630
Kavimani V, Prakash KS, Thankachan T (2019) Experimental investigations on wear and friction behaviour of SiC@ r-GO reinforced mg matrix composites produced through solvent-based powder metallurgy. Compos Part B Eng 162:508–521
Kavimani V, Prakash KS, Thankachan T (2019) Investigation of graphene-reinforced magnesium metal matrix composites processed through a solvent-based powder metallurgy route. Bull Mater Sci 42:39
Kavimani V, Prakash KS, Thankachan T (2017) Surface characterization and specific wear rate prediction of r-GO / AZ31 composite under dry sliding wear condition. Surfaces and Interfaces 6:143–153. https://doi.org/10.1016/j.surfin.2017.01.004
Fukuda H, Szpunar JA, Kondoh K, Chromik R (2010) The influence of carbon nanotubes on the corrosion behaviour of AZ31B magnesium alloy. Corros Sci 52:3917–3923. https://doi.org/10.1016/j.corsci.2010.08.009
Mindivan H, Efe A, Kosatepe AH, Kayali ES (2014) Fabrication and characterization of carbon nanotube reinforced magnesium matrix composites. Appl Surf Sci 318:234–243. https://doi.org/10.1016/j.apsusc.2014.04.127
Rashad M, Pan F, Tang A, Asif M, Aamir M (2014) Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium. J Alloys Compd 603:111–118. https://doi.org/10.1016/j.jallcom.2014.03.038
Rashad M, Pan F, Hu H, Asif M, Hussain S, She J (2015) Enhanced tensile properties of magnesium composites reinforced with graphene nanoplatelets. Mater Sci Eng A 630:36–44. https://doi.org/10.1016/j.msea.2015.02.002
Boostani a F, Tahamtan S, Jiang ZY, Wei D, Yazdani S, Khosroshahi RA et al (2015) Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles. Compos Part A 68:155–163. https://doi.org/10.1016/j.compositesa.2014.10.010
Kumar SD, Synthesis RM Characterization and wire electric Erosion behaviour of AA7178-10 wt.% ZrB 2 composite. Silicon 2018:1–10
Manjaiah M, Narendranath S, Basavarajappa S (2016) Wire electro discharge machining performance of TiNiCu shape memory alloy. Silicon 8:467–475
Kumar SS, Uthayakumar M, Kumaran ST, Parameswaran P, Haneef TK, Mukhopadhyay CK et al (2018) Performance monitoring of WEDM using online acoustic emission technique. Silicon:1–8
Soni H, Narendranath S, Ramesh MR (2018) Effects of wire electro-discharge machining process parameters on the machined surface of Ti 50 Ni 49 co 1 shape memory alloy. Silicon:1–7
Sharma P, Chakradhar D, Narendranath S (2018) Analysis and optimization of WEDM performance characteristics of Inconel 706 for aerospace application. Silicon 10:921–930
Kavimani V, Prakash KS, Thankachan T (2019) Multi-objective optimization in WEDM process of graphene–SiC-magnesium composite through hybrid techniques. Measurement
Manoj M, Jinu GR, Muthuramalingam T (2018) Multi response optimization of AWJM process parameters on machining TiB 2 particles reinforced Al7075 composite using Taguchi-DEAR methodology. Silicon:1–7
Kumar PN, Rajadurai A, Muthuramalingam T (2018) Multi-response optimization on mechanical properties of silica fly ash filled polyester composites using taguchi-grey relational analysis. Silicon:1–7
Suresh G, Vasu V, Rao MV (2018) A composite (Taguchi-utility-RSM) approach for optimizing the Tribological responses of polytetrafluoroethylene (PTFE) nanocomposites for self-lubrication applications. Silicon:1–11
Majumder H, Maity KP (2018) Predictive analysis on responses in WEDM of titanium grade 6 using general regression neural network (GRNN) and multiple regression analysis (MRA). Silicon:1–14
Ilkhechi NN, Yavari R, Barakan S (2017) Evaluation and optimization of effective parameters on zinc sulfate flotation by the Taguchi method. Silicon 9:695–701
Kumar SS, Uthayakumar M, Kumaran ST, Parameswaran P, Mohandas E, Kempulraj G et al (2015) Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis. J Manuf Process 20:33–39. https://doi.org/10.1016/j.jmapro.2015.09.011
Gopal PM, Prakash KS, Jayaraj S WEDM of mg/CRT/BN composites: effect of materials and machining parameters. Mater Manuf Process 2017:1–8
Kr S, Alakesh G, Ajai M. An Experimental Investigation for Optimization of WEDM Parameters During Machining of Fabricated Al / ZrO 2 ( p ) -MMC 2013;2:3471–3483. doi: https://doi.org/10.1007/s13369-013-0657-3
Babu T, Gopala RA (2013) Simultaneous optimization of multiple performance characteristics in WEDM for machining ZC63 / SiC p MMC. Adv Manuf 1:265–275. https://doi.org/10.1007/s40436-013-0029-y
Jagadish RA (2016) Optimization of process parameters of green electrical discharge machining using principal component analysis (PCA). Int J Adv Manuf Technol 87:1299–1311
Sachin Ashok S, Kulkarni ML (2018) Optimization of machining parameters of WEDM for Nimonic-75 alloy using principal component analysis integrated with Taguchi method. J King Saud Univ Sci
Pradhan MK (2013) Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA. Int J Adv Manuf Technol 68:591–605
Kavimani V, Rajesh R, Rammasamy D, Selvaraj NB, Yang T, Prabakaran B et al (2017) Electrodeposition of r-GO/SiC nano-composites on magnesium and its corrosion behavior in aqueous electrolyte. Appl Surf Sci 424:63–71