Von Rittinger theory adapted to wood chip and pellet milling, in a laboratory scale hammermill

Ryckmans Y, Allard P, Liegeois B, Mewissen D. Conversion of a pulverized coal power plant to 100% wood pellets in Belgium. In: Proceedings of the second conference on Pellets, Jönköping, Sweden; 30 May–1 June 2006. p. 59–61. Demirbas, 2003, Sustainable cofiring of biomass with coal, Energy Conversion and Management, 44, 1465, 10.1016/S0196-8904(02)00144-9 Demirbas, 2005, Potential applications of renewable energy sources, biomass combustion problems in boiler power systems and combustion-related environmental issues, Progress in Energy and Combustion Science, 31, 171, 10.1016/j.pecs.2005.02.002 Baxter, 2005, Biomass-coal co-combustion: opportunity for affordable renewable energy, Fuel, 84, 1295, 10.1016/j.fuel.2004.09.023 Nishiyama, 2007, Fuel and emissions properties of Stirling engine operated with wood powder, Fuel, 86, 2333, 10.1016/j.fuel.2007.01.040 Paulrud, 2004, The effects of particle characteristics on emissions from burning wood fuel powder, Fuel, 83, 813, 10.1016/j.fuel.2003.10.010 Tmej, 2000, Development of wood powder feeding into gas turbine combustion chambers, 783 Rhén, 2007, Effect of raw material composition on woody biomass pellets on combustion characteristics, Biomass and Bioenergy, 31, 66, 10.1016/j.biombioe.2006.06.016 Esteban L, Mediavilla I, Fernandez M, Carrasco J. Influence of the size reduction of pine logging residues on the pelletizing process and on the physical properties of pellets obtained. Proceedings of the second conference on Pellets, Jönköping, Sweden; 30 May–1 June 2006. Masson, 1960, Le broyage, première partie, nature de l'opération, état dimensionnel de la matière broyée, énergie nécessaire au broyage, Revue Universelle des Mines, 9e série, tome, XVI, 341 Charles, 1957, Energy-size reduction relationships in comminution, Transactions of AIME, Mining Engineering, 208, 80 Hukki, 1962, Proposal for a solomnic settlement between theories of von Rittinger, Kick and Bond. Transactions of AIME, 223 Morrell, 2004, An alternative energy–size relationship to that proposed by Bond for the design and optimisation of grinding circuits, International Journal of Mineral Processing, 74, 133, 10.1016/j.minpro.2003.10.002 Stambioliadis, 2002, A contribution to the relationship of energy and particle size in the comminution of brittle particulate materials, Minerals Engineering, 15, 707, 10.1016/S0892-6875(02)00185-1 Mani, 2004, Grinding performance and physical properties of wheat and barley straw, corn stover and switchgrass, Biomass and Bioenergy, 27, 339, 10.1016/j.biombioe.2004.03.007 Vigneault, 1992, Hammer mill grinding rate and energy requirements for thin and conventional hammers, Canadian Agricultural Engineering, 34, 203 Rothwell, 1992, Hammermill drill screen evaluation on an energy and economic basis, Canadian Agricultural Engineering, 34, 315 Esteban, 2006, Evaluation of different strategies for pulverization of forest biomasses, Powder Technology, 166, 139, 10.1016/j.powtec.2006.05.018 Laskowski, 1997, Relationships between resistance characteristics of barley kernels and energy consumption during grinding on hammer mill, International Agrophysics, 11, 265 Laskowski, 1998, Cereal grain resistance analysis in the aspect of energy utilization in the process of disintegration, International Agrophysics, 12, 205 Laskowski, 1999, Use of compression behaviour of legume seeds in view of impact grinding prediction, Powder technology, 105, 83, 10.1016/S0032-5910(99)00121-7 Gil, 2012, Milling and handling Cynara Cardunculus L. for use as solid biofuel: experimental tests, Biomass and Bioenergy, 41, 145, 10.1016/j.biombioe.2012.02.023 Bitra, 2009, Direct mechanical energy measures of hammer mill comminution of swithgrass, wheat straw, and corn stover and analysis of their particle size distribution, Powder Technology, 193, 32, 10.1016/j.powtec.2009.02.010 Arias, 2007, Influence of torrefaction on the grindability and reactivity of woody biomass, Fuel Processing Technology Bridgeman, 2010, An investigation of the grindability of two torrefied energy crops, Fuel, 89, 3911, 10.1016/j.fuel.2010.06.043 Phanphanich, 2011, Impact of torrefaction on the grindability and fuel characteristics of forest biomass, Bioresource Technology, 102, 1246, 10.1016/j.biortech.2010.08.028 Bergman PCA, Kiel JHA., Veringa HJ. Combined torrefaction and pelletisation, the TOP process. Study report, ECN biomass, ref ECN-C-05-073; 2005. Miao, 2011, Energy requirement for comminution of biomass in relation to particle physical properties, Industrial Crops and Products, 33, 504, 10.1016/j.indcrop.2010.12.016 CEN/TS 15149-1:2010, Solid biofuels – method for the determination of particle size distribution – part 1: oscillating screen method using sieve aperture of 3.15 mm and above. CEN/TS 15149-2:2010, Solid biofuels – method for the determination of particle size distribution – part 2: vibrating screen method using sieve aperture of 3.15 mm and below. EN 14774-2:2009, Solid biofuels – methods for determination of moisture content – oven dry method – part 2: total moisture – simplified method. EN 15210-1:2009, Solid biofuels – methods for the determination of mechanical durability of pellets and briquettes – part 1: pellets. EN 15150:2005, Solid biofuels – methods for the determination of particle density. EN 15103:2009, Solid biofuels – methods for the determination of bulk density. Daugbjerg Jensen, 2011, Internal particle size distribution of biofuels pellets, Fuel, 90, 980, 10.1016/j.fuel.2010.11.029