Volatile release and particle formation characteristics of injected pulverized coal in blast furnaces

Yeh, 2001, Mining Metall, 45, 57

Ishii, 2000

Smoot, 1985

Yu, 2003, Fuel, 82, 1977, 10.1016/S0016-2361(03)00159-5

Hurt, 1999, Combust Flame, 116, 662, 10.1016/S0010-2180(98)00061-3

Shampine, 1995, Combust Flame, 101, 185, 10.1016/0010-2180(94)00192-U

Steiler, 1996

Ohno, 1994, ISIJ Int, 34, 641, 10.2355/isijinternational.34.641

Babich, 1996, ISIJ Int, 36, 1258, 10.2355/isijinternational.36.1250

Chung, 1997, ISIJ Int, 37, 119, 10.2355/isijinternational.37.119

Ariyama, 1994, ISIJ Int, 34, 476, 10.2355/isijinternational.34.476

Du, 2006, Int Comm Heat Mass Transf, 33, 327, 10.1016/j.icheatmasstransfer.2005.10.015

Du SW, Yeh CM, Ho CK, Yang MK. In: Proceedings of the AISTech 2004 conference; 2004. p. 195–204.

Fletcher, 1997, Progr Energ Combust Sci, 23, 283, 10.1016/S0360-1285(97)00009-9

Kalkreuth, 2005, Fuel, 84, 763, 10.1016/j.fuel.2004.11.007

Alonso, 2001, Fuel, 80, 1857, 10.1016/S0016-2361(01)00071-0

Carpenter, 1995

Card, 1995, Combust Flame, 101, 539, 10.1016/0010-2180(94)00237-M

Lee, 1996, Fuel, 75, 1035, 10.1016/0016-2361(96)00084-1

Anthony, 1976, Fuel, 55, 121, 10.1016/0016-2361(76)90008-9

Gibbins, 1993, Determination of rapid heating volatile matter contents as a routine test, Combust Sci Technol, 93, 349, 10.1080/00102209308935297

Chen, 2000, Combust Sci Technol, 151, 105, 10.1080/00102200008924216

Wall, 2002, Progr Energ Combust Sci, 28, 405, 10.1016/S0360-1285(02)00007-2