Vibrational metrics for the evaluation of internal conditions in a scaled nuclear dry storage cask

Kook, 2013, Review of spent fuel integrity evaluation for dry storage, Nucl Eng Technol, 45, 115, 10.5516/NET.06.2012.016 Rigby DB. Evaluation of the Technical Basis for Extended Dry Storage and Transportation of Used Nuclear Fuel, United States Nuclear Waste Technical Review Board; 2010. Kessler J, Einziger RE. Technical Bases for Extended Dry Storage of Spent Nuclear Fuel, Electric Power Research Institute; 2002. Waldrop K. Extended Storage Collaboration Program International Subcommittee Report, Electric Power Research Institute; 2012. Hanson B, Alsaed H, Stockman C, Enos D, Meyer R, Sorenson K. Gap Analysis to Support Extended Storage of Used Nuclear Fuel, U.S. Department of Energy; 2013. http://energy.gov/sites/prod/files/Gap Analysis Rev 0 Final.pdf. Benke R, Jung H, Ghosh A, Pan Y, Tait JC. Potential Releases inside a Spent Nuclear Fuel Dry Storage Cask due to Impacts: Relevant Information and Data Needs, U.S. Nuclear Regulatory Commission; 2012. Wu, 2012, Dynamic response analysis of a spent-fuel dry storage cask under vertical drop accident, Ann Nucl Energy, 42, 18, 10.1016/j.anucene.2011.12.016 Saegusa, 2012, Review and future issues on spent nuclear, Nucl Eng Technol, 42, 237, 10.5516/NET.2010.42.3.237 Connolly KJ, Pope RB. A Historical Review of the Safe Transport of Spent Nuclear Fuel, U.S. Department of Energy; 2016. Bare WC, Torgerson LD. Dry Cask Storage Characterization CASTOR V / 21 Cask Opening and Examination, U.S. Nuclear Regulatory Commission; 2001. Lambert JD, Bakhtiari S, Bodnar I, Kot C, Pence J. NRC Job Code V6060: Extended In-Situ and Real Time Monitoring Task 3: Long-Term Dry Cask Storage of Spent Nuclear Fuel, U.S. Nuclear Regulatory Commission; 2012. Meyer RM, Pardini AF, Cuta JM, Adkins HE, Casella AM, Qiao A, Larche M, Diaz AA, Doctor SR. NDE to Manage Atmospheric SCC in Canisters for Dry Storage of Spent Fuel: An Assessment, U.S. Nuclear Regulatory Commission Report; 2013. Salchak, 2015, Dry storage casks monitoring by means of ultrasonic tomography, Phys Procedia, 70, 484, 10.1016/j.phpro.2015.08.291 Howden S, Lin B, Yu L, Giurgiutiu V. Acoustic emission and active sensing capabilities on full-scale nuclear dry cask storage structures. In: Proc. SPIE - Int. Soc. Opt. Eng.; 2018. Shayer Z, Yu Z, Olson DL, Liu S, Gordon S, Murty KL et al. Lewis, Integrated Research Program Overview on the “Innovative Approaches to Marine Atmospheric Stress Corrosion Cracking Inspection, Evaluation And Modeling in Used-Fuel Dry Storage Canisters”. In: Ohji T, Matyas J, Colorado H, Kanakala R (Eds.), Adv. Mater. Sci. Environ. Energy Technol. VI, 2017. doi: 10.1002/9781119423799.ch15. Remillieux M, Le Bas P, Pieczonka L, Anderson BE. Estimating the Penetration Depth and Orientation of Stress Corrosion Cracks Using Time-Reversal Acoustics, In: Trans. Am. Nucl. Soc.; 2016: pp. 217–20. Anderson, 2017, Stress corrosion crack depth investigation using the time reversed elastic nonlinearity diagnostic, J Acoust Soc Am, 141, 76, 10.1121/1.4974760 Hogg, 2018, Nonlinear resonant ultrasound spectroscopy of stress corrosion cracking in stainless steel rods, NDT&E Int Young, 2019, Nonlinearity from stress corrosion cracking as a function of chloride exposure time using the time reversed elastic nonlinearity diagnostic, J Acoust Soc Am, 145, 10.1121/1.5087828 Payan, 2014, Quantitative linear and nonlinear resonance inspection techniques and analysis for material characterization: application to concrete thermal damage, J Acoust Soc Am, 136, 537, 10.1121/1.4887451 Kim, 2018, Nonlinear Rayleigh surface waves to characterize microscale damage due to alkali-silica reaction (ASR) in full-scale, nuclear concrete specimens, Constr Build Mater, 186, 1114, 10.1016/j.conbuildmat.2018.08.022 Matlack, 2012, Evaluation of radiation damage using nonlinear ultrasound, J Appl Phys, 111, 10.1063/1.3692086 Matlack, 2014, Sensitivity of ultrasonic nonlinearity to irradiated, annealed, and re-irradiated microstructure changes in RPV steels, J Nucl Mater, 448, 26, 10.1016/j.jnucmat.2014.01.038 Choi, 2017, Selection of shear horizontal wave transducers for robotic nondestructive inspection in harsh environments, Sensors, 17 Lissenden, 2017, Toward robotic inspection of dry storage casks for spent nuclear fuel, J Press Vessel Technol Trans ASME, 139, 10.1115/1.4035788 Choi, 2018, Nondestructive inspection of spent nuclear fuel storage canisters using shear horizontal guided waves, Nucl Eng Technol, 1 Choi, 2018, Electromagnetic acoustic transducers for robotic nondestructive inspection in harsh environments, Sensors, 18, 1 Lin, 2019, Vibrational modes for the internal characterization of a full- scale Transnuclear-32 dry storage cask for spent nuclear fuel assemblies, J Sound Vib, 460, 10.1016/j.jsv.2019.114881 Yang, 2004, Non-destructive characterization of hydrogen concentration in zircalloy, Key Eng Mater, 270–273, 89, 10.4028/www.scientific.net/KEM.270-273.89 Nakatsuka, 2006, A New non-destructive technique for hydrogen level assessment in zirconium alloys using EMAR method, J Nucl Sci Technol, 43, 1142, 10.1080/18811248.2006.9711206 Nikulin SA, Khanzhin VG, Rojnov AB. Application of an Acoustic Emission Method for SCC Testing of Zirconium Cladding Tubes, in: Corros. 2002, NACE International, 2002. https://www.onepetro.org/conference-paper/NACE-02437. Sinha, 1992, Acoustic resonance spectroscopy (ARS), IEEE Potentials, 11, 10, 10.1109/45.127718 Chen, 1975, Vibration of Nuclear Fuel Bundles, Nucl Eng Des, 35, 399, 10.1016/0029-5493(75)90071-0 Zeman, 2016, Mathematical modelling of friction-vibration interactions of nuclear fuel rods, Appl Comput Mech, 10, 57 Kang, 2001, Verification test and model updating for a nuclear fuel rod with its supporting Structure, J Korean Nucl Soc, 33, 73 R.S. Roberts, P.S. Lewis, O.A. Vela, A pattern recognition algorithm for the blind discrimination of liquid and solid filled munitions, in: Conf. Rec. Twenty-Ninth Asilomar Conf. Signals, Syst. Comput., 1995: pp. 1310–1314 vol.2. doi:10.1109/ACSSC.1995.540911. R.S. Roberts, J.T. Chen, O.A. Vela, P.S. Lewis, Munitions classification using an acoustic resonance spectroscopic technique, in: Proc. 27th Asilomar Conf. Signals, Syst. Comput., 1993: pp. 991–995 vol.2. doi:10.1109/ACSSC.1993.342421. Han W, Sinha DN, Springer KN, Lizon DC. Noninvasive Measurement of Acoustic Properties of Fluids Using an Ultrasonic Interferometry Technique, in: R.E. Green (Ed.), Nondestruct. Charact. Mater. VIII, Springer; 1998: pp. 393–99. doi:10.1007/978-1-4615-4847-8. Olinger CT, Sinha DN. Acoustic techniques in nuclear safeguards. In: 17th Annu. ESARDA Symp. Safeguards Nucl. Mater. Manag., Aachen, Germany; 1995. Olinger C. Acoustic resonance spectroscopy for safeguards, in: Trans. Am. Nucl. Soc.; 1994. Al-khazali, 2012, Geometrical and graphical representations analysis of lissajous figures in rotor dynamic system, IOSR J Eng, 2, 971, 10.9790/3021-0205971978 Lin, 2017, Vibrometric characterization of an intact and unloaded scaled model TN-32 dry storage cask for spent nuclear fuel, Proc Meet Acoust, 31, 65004, 10.1121/2.0000754