Vibration of cracked structures: A state of the art review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Dimarogonas, 1970, Dynamic response of cracked rotors, General Electric Co., Internal report
Dimarogonas, 1971, Dynamics of cracked shafts, General Electric Co., Internal Report
Dimarogonas, 1976
Pafelias, 1974, Dynamic behaviour of a cracked rotor, General Electric Co., Technical Information Series, No. DF-74-LS-79
Schmerling, 1966, Investigation of the Tennessee Valley Authority Gallation Unit No. 2 turbine rotor burst
Haas, 1977, Grossschäden durch turbinen- oder generatorleufer, entstanden im bereich bis zur Schleuderdrehzahl, Maschinenschaden, 50, 195
Jack, 1976, Cracking in 500 MW LP rotor shafts
Greco, 1978, Cumberland steam plant-cracked IP rotor coupling
Kottke, 1981, Detection of a transverse crack in a turbine shaft—the Oak Creek experience, A.S.M.E., Paper 81-JPGG-Pwr-19
Anifantis, 1983, Diagnosis of cracks on concrete frames due to earthquakes by vibration response analysis
Klompas, 1983, Effects of anomalous rotor joints on turbomachine dynamics, J. Engng Power, 105, 927, 10.1115/1.3227502
Kraemer, 1989, Betriebserfahrungen mit gerissenen Rotoren. Operating experience with cracked rotors, Maschinenschaden, 62, 211
Dimarogonas, 1983, Analytical methods in rotor dynamics, Applied Science, 144
Wauer, 1990, Cracked rotor Dynamics: a state of the art survey, Appl. Mech. Reviews, 43, 13, 10.1115/1.3119157
Entwistle, 1990, Survey of the use of vibration methods in the assessment of component geometry, Vib. and Noise-Meal. Pred. and Cont., Inst. of Engng., 90, 210
Dimarogonas, 1992, A brief history of rotor dynamics, Vol. 92
Gasch, 1993, A survey of the dynamic behavior of a simple rotating shaft with a transverse crack, J. Sound Vibration, 160, 313, 10.1006/jsvi.1993.1026
Kirmsher, 1944, The effect of discontinuities on the natural frequency of beams, 44, 897
Thomson, 1943, Vibration of slender bars with discontinuities in stiffness, J. appl. Mech., 17, 203
Irwin, 1957, Analysis of stresses and strains near the end of a crack traversing a plate, J. appl. Mech., 24, 361, 10.1115/1.4011547
Irwin, 1957, Relation of stresses near a crack to the crack extension force
Bueckner, 1958, The propagation of cracks and the energy of elastic deformation, Trans, ASME, 80, 1225
Westmann, 1967, Stress analysis of cracked rectangular beams, J. appl. Mech., 32, 693, 10.1115/1.3607763
Liebowitz, 1967, Carrying capacity of notched column, Int. J. Solids Structures, 3, 489, 10.1016/0020-7683(67)90003-0
Liebowitz, 1968, Failure of notched columns, Engng Fracture Mech., 1, 379, 10.1016/0013-7944(68)90010-6
Okamura, 1969, A cracked column under compression, Engng Fracture Mech., 1, 547, 10.1016/0013-7944(69)90011-3
Anifantis, 1978, Stability of cracked columns
Dimarogonas, 1981, Buckling of rings and tubes with longitudinal cracks, Mech. Res. Commun., 8, 179, 10.1016/0093-6413(81)90010-0
Anifantis, 1983, Imperfection post-bucking analysis of cracked columns, Engng Fracture Mech., 18, 693, 10.1016/0013-7944(83)90060-7
Anifantis, 1983, Stability of columns with a single crack subjected to follower and vertical loads, Int. J. Solids Structures, 19, 281, 10.1016/0020-7683(83)90027-6
Anifantis, 1984, Post buckling behavior of transverse cracked columns, Compos. Structures, 18, 2
Kirkhope, 1984, The vibration of rings of unsymmetrical cross-section, J. Sound Vibration, 96, 495, 10.1016/0022-460X(84)90636-9
Brown, 1966, Plane strain crack toughness testing of high strength metallic materials, ASTM STP, 410, 12
Tada, 1985
Gudmundson, 1983, The dynamic behavior of slender structures with cross-sectional cracks, J. Mech. Phys. Solids, 31, 329, 10.1016/0022-5096(83)90003-0
Rauch, 1985, Shaft cracking supervision of heavy turbine rotors by FMM-method, Vol. 2., 714
Chen, 1986, Finite element analysis of axisymmetric cracked solid subjected to torsional loadings, Engng Fracture Mech., 23, 705, 10.1016/0013-7944(86)90117-7
Haisty, 1988, Cracked beam modification element (Parts 1 and 2), Vol. 2, 1343
Haisty, 1985, The longitudinal vibration characteristics of a uniform beam containing two symmetric discontinuities, 389
Haisty, B. S. and Springer, W. T., A general beam element for use in damage assessment of complex structures. J. Vib. Acoust. Stress Reliab. Design (to be published).
Krawczuk, 1992, Parametric Vibrations of beam with crack, Ing. Arch., 62, 463
Krawczuk, 1993, Natural vibrations of rectangular plates with a through crack, Arch. appl. Mech., 63, 491, 10.1007/BF00788047
Krawczuk, 1993, Transverse natural vibrations of a cracked beam loaded with a constant axial force, J. Vib. Acoustics, Trans. ASME, 115, 428
Ostachowicz, 1993, Coupled torsional and bending vibrations of a rotor with an open crack, Ing.-Arch., 62, 191
Ostachowitz, 1991, Analysis of the effect of cracks on the natural frequencies of a cantilever beam, J. Sound Vibration, 150, 191, 10.1016/0022-460X(91)90615-Q
Ostachowicz, 1990, A discrete linear beam model to investigate the nonlinear effects of slip friction, Compos. Structures, 36, 721, 10.1016/0045-7949(90)90086-H
Ostachowicz, 1990, Vibration analysis of a cracked beam, Compos. Structures, 36, 245, 10.1016/0045-7949(90)90123-J
Ostachowicz, 1989, Forced vibrations of a beam including dry friction dampers, Compos. Structures, 33, 851, 10.1016/0045-7949(89)90259-9
Ostachowicz, 1989, The harmonic balance method for determining the vibration parameters in damped dynamic systems, J. Sound Vibration, 131, 465, 10.1016/0022-460X(89)91006-7
Schmalhorst, 1988, Numerical simulation of cracked rotors vibrations due to measured crack shapes, Vol. 2, 271
Schmalhorst, 1989, Experimentelle und theoretische untersuchungen zum schwingungsverhalten angerissener rotoren, 11
Qian, 1991, Finite element model of cracked plates and application to vibration problems, Compos. Structures, 39, 483, 10.1016/0045-7949(91)90056-R
Gounaris, 1988, A finite element of a cracked prismatic beam for structural analysis, Comput. Structures, 28, 309, 10.1016/0045-7949(88)90070-3
Gounaris, 1991, Dynamics of cracked hollow beams, Engng Fracture Mech., 39, 931, 10.1016/0013-7944(91)90101-6
Gounaris, 1992, 3-Dimensional effects on the natural vibrations of cracked Timoshenko beams in water, Compos. Structures, 42, 769, 10.1016/0045-7949(92)90188-6
Papaeconomou, 1989, Vibration of cracked beams, Comput. Mech., 4, 130
Haisty, 1986, Development and application of a cracked beam finite element and a cracked beam modal element for assessing the effects of damage on complex structures
Krawczuk, 1993, Hexahedral finite element with an open crack, Finite Element Analysis and Design, 13, 225, 10.1016/0168-874X(93)90040-W
Krawczuk, 1993, A rectangular plate finite element with an open crack, Comput. Structures, 46, 487, 10.1016/0045-7949(93)90218-3
Krawczuk, 1992, A Timoshenko cracked beam finite element, Vol. 1, 67
Krawczuk, 1992, 1 Finite Timoshenko-type beam element with a crack, Engng Trans., 40, 229
Krawczuk, 1992, Modelling and identification of cracks in truss constructions, Finite Element Analysis and Design, 12, 41, 10.1016/0168-874X(92)90005-W
Wendtland, 1972, Änderung der biegeeigen frequenzen einer idealisierten schaufel durch risse
Isalik, 1967, Free vibrations of reinforced concrete bars with crack in flexure, Sov. appl. Mech., 3, 71, 10.1007/BF00886237
Petroski, 1980, The response of cracked cylindrical shells, J. appl. Mech., 47, 444, 10.1115/1.3153690
Petroski, 1981, Simple static and dynamic models for the cracked elastic beam, Int. J. Fracture, 17, R71, 10.1007/BF00036201
Petroski, 1983, Structural dynamics of piping with stable cracks: some simple models, Int. J. Press. Vess. Piping, 13, 1, 10.1016/0308-0161(83)90046-7
Petroski, 1984, The permanent deformation of a cracked cantilever struck transversely at its tip, J. appl. Mech., 51, 329, 10.1115/1.3167621
Petroski, 1984, Worst-case cracks in ductile cantilever struck transversely at the tip, Int. J. Fracture, 26, R29, 10.1007/BF01152321
Petroski, 1984, Stability of a crack in a cantilever beam undergoing large plastic deformation after impact, Int. J. Press. Vess. Piping, 16, 285, 10.1016/0308-0161(84)90019-X
Petroski, 1985, Simple models for the stability of a crack in a cantilever beam subject to impact, Engng Fracture Mech., 21, 377, 10.1016/0013-7944(85)90025-6
Petroski, 1985, Plastic response of cantilevers with stable cracks, J. Engng Mech., 111, 839, 10.1061/(ASCE)0733-9399(1985)111:7(839)
Kumar, 1985, Plastic response to impact of a simply supported beam with a stable crack, Int. J. Impact Engng, 3, 27, 10.1016/0734-743X(85)90023-5
Ku, 1992, Dynamic stability of a shaft disk system with flaws, Comput. Structures, 43, 306, 10.1016/0045-7949(92)90147-R
Chondros, 1977, Dynamic response of cracked beams
Chondros, 1981, Dynamics of cracked structures
Chondros, 1979, Identification of cracks in circular plates welded at the contour
Chondros, 1980, Identification of cracks in welded joints of complex structures, J. Sound Vibration, 69, 531, 10.1016/0022-460X(80)90623-9
Adams, 1978, A vibration technique for non-destructively assessing the integrity of structures, J. Mech. Engng Sci., 10.1243/JMES_JOUR_1978_020_016_02
Gudmundson, 1982, Eignefrequency changes of structures due to cracks, notches or other geometrical changes, J. Mech. Phys. Solids, 30, 339, 10.1016/0022-5096(82)90004-7
Dentsoras, 1983, Resonance controlled fatigue crack propagation in cylindrical shafts under combined loading
Dentsoras, 1983, Resonance controlled fatigue crack propagation, Engng Fracture Mech., 17, 381, 10.1016/0013-7944(83)90088-7
Dentsoras, 1983, Resonance controlled fatigue crack propagation in a beam under longitudinal vibrations, Int. J. Fracture, 23, 15, 10.1007/BF00020154
Dentsoras, 1989, Fatigue crack propagation in resonating structures, Engng Fracture Mech., 34, 721, 10.1016/0013-7944(89)90133-1
Springer, 1987, The effect of a symmetric discontinuity on adjacent material in a longitudinally vibrating uniform beam, Exp. Mech., 27, 168, 10.1007/BF02319470
Silva, 1990, Experimental dynamic analysis of cracked free-free beams, Exp. Mech., 30, 20, 10.1007/BF02322697
Gomez, 1991, Theoretical and experimental data on crack depth effects in the dynamic beahviour of free-free beams, Vol. 9, 274
Araujo Gomez, 1990, Experimental determination of the influence of the crosssection size in the dynamic behaviour of cracked beams, 124
Nezu, 1980, A new damage detecting method by mechanical impedance measurement, Bull. JSME, 23, 2125, 10.1299/jsme1958.23.2125
Wedig, 1980, Schadensfruherkennung beim angerissenen biegeschwinger-rissidentifikation durch spektralanalyse zweier resonanzen, 381, 45
Ju, 1988, Experimental diagnosis of fracture damage in structures by the modal frequency method, J. Vib. Acoust. Stress Reliab. Des., 110, 456, 10.1115/1.3269550
Ju, 1986, Modal frequency method in diagnosis of fracture damage in structures, Vol. 2, 1168
Akgun, 1985, Transmissibility as a means to diagnose damage in structures, Vol. 1, 701
Akgun, 1987, Diagnosis of multiple cracks on a beam structure, Int. J. Anal. Exp. Modal Anal., 2, 149
Lu, 1991, Structural damage configurations subject to modal oscillations, A.S.M.E., DE38, 1
Lu, 1991, Probabilistic distribution of multiple cracks structures due to random modal oscillations, Int. J. Anal. Exp. Modal Anal., 6, 25
Kujath, 1986, Identification of fractures in rotors, 379
Kujath, 1988, Detection of sudden changes of modal parameters in machinery, Vol. 2, 1253
Kujath, 1986, Diagnosis of fractures in machinery, Vol. 1, 611
Salane, 1990, Changes in modal parameters of a bridge during fatigue testing, Exp. Mech., 30, 109, 10.1007/BF02410234
Guigne, 1992, Modal information from acoustic measurements for fatigue crack detection applications, 1, 585
Kam, 1992, Detection of cracks in structures using modal test data, Engng Fracture Mech., 42, 381, 10.1016/0013-7944(92)90227-6
Kikidis, 1992, Slenderness ratio effect on cracked beam, J. Sound Vibration, 155, 1, 10.1016/0022-460X(92)90641-A
Liang, 1991, Detection of cracks in beam structures using natural frequencies, J. Franklin Institute, 328, 505, 10.1016/0016-0032(91)90023-V
Qian, 1990, The dynamic behavior and crack detection of a beam with a crack, J. Sound Vibration, 138, 233, 10.1016/0022-460X(90)90540-G
Nikpur, 1988, Local compliances of cracked composite bodies, Comp. Sci. Tech., 32, 209, 10.1016/0266-3538(88)90021-8
Adali, 1992, Effect of transverse matrix cracks on the frequencies of unsymmetrical, cross-ply laminates, J. Franklin Inst., 329, 655, 10.1016/0016-0032(92)90078-U
Irretier, 1993, Crack detection in composite driving shafts by experimental modal analysis, A. S.M. E., DE64, 33
Swartz, 1984, Validity of compliance calibration to cracked concrete beams in bending, Exp. Mech., 24, 129, 10.1007/BF02324995
Cawley, 1979, A vibration technique for nondestructive testing of fibre composite structures, J. Compos. Mater., 13, 161, 10.1177/002199837901300207
Nikpour, 1990, Buckling of cracked composite columns, J. Solids Structures, 26, 1371, 10.1016/0020-7683(90)90084-9
Cawley, 1988, A comparison of the natural frequency changes produced by cracks and slots, J. Vib. Ac. Stress Reliab. Design, 110, 366, 10.1115/1.3269527
Donnelly, 1985, Remote vibration monitoring at historic structures, Vol. 1, 63
Nikiforideis, 1986, Vibration analysis of fracture healing under plaster cast
Nikiforidis, 1990, Monitoring of fracture healing with flexural and axial vibration analysis, J. Biom., 23, 323, 10.1016/0021-9290(90)90060-G
Dimarogonas, 1993, Early diagnosis of incipient failures of the Bjoerk-Shiley heart valves, 260
Dimarogonas, 1993, Material damping for monitoring of density and strength of bones, Calcified Tissue Intern., 52, 244, 10.1007/BF00298727
Lynn, 1967, Free vibrations of thin rectangular plates having narrow cracks with simply supported edges, Dev. Mech., 4, 928
Stahl, 1972, Vibration and stability of cracked rectangular plates, Int. J. Solids Structures, 8, 69, 10.1016/0020-7683(72)90052-2
Ko, 1978, Effect of crack size on the natural frequencies of a cracked plate, Int. J. Fracture, 14, R273
Reddy, 1982, Transient response of laminated, bimodular-material, composite rectangular plates, J. Compos. Mater., 16, 139, 10.1177/002199838201600205
Lee, 1992, Fundamental frequencies of annular plates with internal cracks, Comput. Structures, 43, 1085, 10.1016/0045-7949(92)90009-O
Aggarwala, 1981, Vibration and bending of a cracked plate, Engng Trans., 29, 295
Krawczuk, 1994, Experimental dynamic analysis of rectangular cantilever cracked plates, ASCE Journal Mech. Engng
Krawczuk, 1993, Natural vibrations of plates with a through crack, Ing.-Arch., 63, 491
Hirano, 1980, Vibration of cracked rectangular plates, Bulletin, J. S.M. E., 23, 732, 10.1299/jsme1958.23.732
Solecki, 1983, Bending vibration of a simple supported rectangular plate with a crack parallel to one edge, Engng Fracture Mech., 18, 1111, 10.1016/0013-7944(83)90004-8
Dimarogonas, 1975, A general method for stability analysis of rotating shafts, Ing.-Arch., 44, 9, 10.1007/BF00534792
Dias, 1987, Analysis of discrete vibration systems containing cracked elements, DE8, 33
Gross, 1964, Stress-intensity factors for a single-edge-notch tension specimen by boundary collocation of a stress function, NASA TN D-2395
Gross, 1965, Stress intensity factor for single-edge-notch specimens in bending or combined bending and tension by boundary collocation of a stress function, NASA Technical Note, D-2603
Rice, 1972, The part-through surface crack in an elastic plate, J. appl. Mech., 39, 185, 10.1115/1.3422609
Dimarogonas, 1982, Crack identification in aircraft structures
Dimarogonas, 1987
Dimarogonas, 1988
Anifantis, 1983, Identification of peripheral cracks in cylindrical shells
Papadopoulos, 1987, Coupled longitudinal and bending vibrations of a rotating shaft with an open crack, J. Sound Vibration, 117, 81, 10.1016/0022-460X(87)90437-8
Papadopoulos, 1987, Coupling of bending and torsional vibration of a cracked Timoshenko shaft, Ing.-Arch., 57, 496, 10.1007/BF00534404
Papadopoulos, 1987, Stability of cracked rotors in the coupled vibration mode, 25
Papadopoulos, 1987, Stability of cracked rotors in the coupled vibration mode, Vol. 2, 25
Papadopoulos, 1986, Coupled longitudinal and bending vibrations of a rotating shaft with an open crack, J. Sound Vibration, 117, 81, 10.1016/0022-460X(87)90437-8
Papadopoulos, 1988, Coupled longitudinal and bending vibrations of a cracked shaft, J. Vibration, Acoust. Stress Reliab. Design, 110, 1, 10.1115/1.3269474
Papadopoulos, 1988, Stability of cracked shafts in the coupled vibration mode, ASME J. Vib. Acoust. Stress Reliab. Design, 110, 356, 10.1115/1.3269525
Papadopoulos, 1989, Coupled vibration of cracked shafts, Vol. 18, 7
Papadopoulos, 1992, Coupled vibration of cracked shafts, J. Vib. Acoust., 114, 461, 10.1115/1.2930285
Papadopoulos, 1987, Coupled vibrations of cracked shafts
Ostachowicz, 1992, Coupled torsional and bending vibrations of a rotor with an open crack, Arch. appl. Mech., 62, 191, 10.1007/BF00787959
Gudmundson, 1984, Changes in modal parameters resulting from small cracks, Vol. 2, 690
Gudmundson, 1986, Determination of optimal design modifications using experimental modal parameters, Vol. 2, 1299
Rizos, 1990, Identification of crack location and magnitude in a cantilever beam from the vibration modes, J. Sound Vibration, 138, 381, 10.1016/0022-460X(90)90593-O
Christides, 1984, One-dimensional theory of cracked Bernoulli-Euler beams, Int. J. Mech. Sci., 26, 639, 10.1016/0020-7403(84)90017-1
Christides, 1986, Torsional vibration of cracked beams of non-circular cross-section, Int. J. Mech. Sci., 28, 473, 10.1016/0020-7403(86)90067-6
Washizu, 1955, On the variational principles of elasticity and plasticity
Barr, 1966, An extension of the Hu-Washizu variational principle in linear elasticity for dynamic problems, Trans. ASME, J. appl. Mech., 33, 465, 10.1115/1.3625076
Shen, 1990, Natural modes of Bernoulli-Euler beams with symmetric cracks, J. Sound Vibration, 138, 115, 10.1016/0022-460X(90)90707-7
Dimarogonas, 1981, Torsional vibration of a shaft with a circumferential crack, Engng Fracture Mech., 15, 439, 10.1016/0013-7944(81)90069-2
Chang, 1986, On detecting a crack by tapping a beam, Int. J. Press. Vess. Piping, 22, 41, 10.1016/0308-0161(86)90043-8
Kolzow, 1974, Abnormal vibration—a symptom to cracked rotors
Shatoff, 1976, Using vibration analysis to determine the dynamic health of turbine generators, Power, 120, 23
Cawley, 1979, The location of defects in structures from measurements of natural frequencies, J. Strain Anal., 14, 127, 10.1243/03093247V142049
Cawley, 1979, Defect location in structures by a vibration technique
Anifantis, 1987, Identification of cracks on beams by vibration analysis, Vol. 2, 189
Yuen, 1985, A numerical study of the eigenparameters of a damaged cantilever, J. Sound Vibration, 103, 301, 10.1016/0022-460X(85)90423-7
Rizos, 1988, Identification of cracks in beams by vibration analysis
Parekh, 1977, Effects of a localized region of damage on the parametric excitation of a bar, Int. J. Mech. Sci., 19, 547, 10.1016/0020-7403(77)90047-9
General Electric Company, 1984, General Electric researches steam turbine crack monitor, Design News, 40, 22
General Electric Company, 1974, Technical information letters, TIL-727-2
General Electric Company, 1974, Technical information letters, TIL-705-3
1984, Machine Design, 56, 16
Jenkins, 1985, Cracked shaft detection on large vertical nuclear reactor coolant pump, 2409, 253
Reznicek, 1985, Damage assessment of transversely vibrating uniform beams containing a symmetric discontinuity, 404
Crum, 1986, Shaft crack detection, Orbit, 7, 1
Diana, 1986, An on-line crack detection method for turbo generator rotors, 385
Diana, 1986, A diagnostic system to define malfunctioning conditions on a turbo-generator, 367
Al-Ansary, 1986, A model for fatigue crack non-destructive testing, Vol. 1, 202
White, 1986, Fault diagnosis in rotating machinery, 391
McFadden, 1986, Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration, J. Vib. Acoust. Stress Reliab. Design, 108, 165, 10.1115/1.3269317
El Katib, 1986, Computer aided fault diagnosis in turbo-compressors using vibration measurements, Vol. 2, 1403
Xia, 1987, A new method in the fault diagnosis of turbomachine and its application. Mech, Vol. 7, 131
Herbert, 1987, Turbine-alternator run-down vibration analysis: automated crack detection, Vol. 2, 631
Rogers, 1988, Flaw identification from forced vibration testing, Vol. 2, 1414
Gu, 1989, A vibration diagnosis approach to structural fault, J. Vib. Acoust. Stress Reliab. Design, 111, 88, 10.1115/1.3269829
Ogawa, 1989, Development and application of diagnosis technique for structure, NKK Tech. Rev., 55, 21
Xu, 1989, Failure diagnosis using fuzzy logic, 18, 93
Bastadzhan, 1990, Diagnostics of beam elements using calculated frequencies and modes, Vib. Engng (Vibrotekhnika), 4, 31
Ismail, 1990, Identification of fatigue cracks from vibration testing, J. Sound Vibration, 140, 305, 10.1016/0022-460X(90)90530-D
Liang, 1991, Detection of cracks in beam structures using measurements of natural frequencies, J. Franklin Institute, 328, 505, 10.1016/0016-0032(91)90023-V
Zhang, 1989, Further development of flaw plane identification with application to crack sizing, DT Intern., 22, 277
Zhao, 1990, Convenient method for diagnosis of shafting crack, A. S.M. E., 18, 29
Bosmans, 1985, Cracked rotor demonstration, 2409, 443
Boving, 1987, 340
Pandey, 1991, Damage detection from changes in curvature mode shapes, J. Sound Vibration, 145, 321, 10.1016/0022-460X(91)90595-B
Yiching, 1992, Detecting flaws in concrete beams and columns using the impact-echo method, ACI Mater. J., 89, 396
Lazzeri, 1992, Second harmonic vibration monitoring of a cracked shaft in a turbogenerator, 54, 1337
Hu, 1993, Integrated approach to detection of cracks using vibration characteristics, J. Franklin Institute, 330, 841, 10.1016/0016-0032(93)90080-E
Pye, 1982, A vibration method for the determination of stress intensity factors, Engng Fracture Mech., 16, 433, 10.1016/0013-7944(82)90121-7
Wedig, 1982, Schadensfruherkennung-theoric and praxis der stochastischen Rissidentifikation, Z. Agnew. Math. Mech., 62, T89
Wedig, 1984, Les systemes de controle de degradation des ouvrages
Collins, 1989, The effect of cracks on the dynamic behavior of bars and shafts
Araujo Gomez, 1990, On the use of modal analysis for crack identification, Vol. 2, 1108
Morassi, 1993, Crack-induced changes in eigenparameters of beam structures, ASCE J. of Engng Mech., 119, 1798, 10.1061/(ASCE)0733-9399(1993)119:9(1798)
Fox, 1992, The location of defects in structures: a comparison of the use of natural frequency and mode shape data, Vol. 1, 522
Luongo, 1992, Mode localization by structural imperfections in one-dimensional continuous systems, J. Sound Vibration, 155, 249, 10.1016/0022-460X(92)90510-5
Alampalii, 1992, Modal analysis as a bridge inspection tool, 1359
Rytter, 1993, Vibrational based inspection of civil engineering structures, Vol. 44
Collins, 1991, Detection of cracks in rotating Timoshenko shafts using axial impulses, ASME, J. of Vibration Acoustics, 113, 74, 10.1115/1.2930158
Friswell, 1992, A simple nonlinear model of a cracked beam, Vol. 1, 516
Dimentberg, 1961
Wang, 1987, Sensitivity analysis in fault vibration diagnosis of structures, Vol. 1, 496
Chondros, 1989, Dynamic sensitivity of structures to cracks, J. Vib. Acoust. Stress Relial. Design, 111, 251, 10.1115/1.3269849
Girard, 1989, Sensitivity analysis of structural response functions, 756
Zastrau, 1985, Vibration of cracked structures, Arch. Mech., 37, 731
Zastrau, 1986, Zur anwendung von kontactelementen fuer die berechnung des schwingungsverhaltens gerissener Balken, Z. Ang. Math. Mech., 66, 112
Allen, 1990, Cracked shaft diagnosis and detection on reactor recirculation pumps at Grand Gulf nuclear station, Nucl. Plant J., 8, 78
Gao, 1992, On dynamic behavior of cracked rotors, Polytechnical University, 10, 434
Guang, 1993, Stability and stability degree of a cracked flexible rotor supported on journal bearings, A. S.M. E., DE, 60, 315
Shen, 1991, An identification problem for vibrating cracked beams, J. Sound Vibration, 8, 457, 10.1016/0022-460X(91)90898-T
Shen, 1991, Vibrations of beams with a fatigue crack, recent advances in structural mechanics, ASME, PVP, 225, 57
Shen, 1992, Vibrations of beams with a fatigue crack, Comput. Structures, 45, 79, 10.1016/0045-7949(92)90347-3
Chang, 1993, Modal analysis technique for bridge damage detection, ASCE, Struct. Engng Nat. Hazard Mitigation, 1083
Salane, 1990, Changes in modal parameters of a bridge during fatigue testing, Exp. Mech., 30, 109, 10.1007/BF02410234
Samman, 1994, Vibration testing for nondestructive evaluation of bridges, I: Theory, J. Structural Engng, 120, 269, 10.1061/(ASCE)0733-9445(1994)120:1(269)
Samman, 1994, Vibration testing for nondestructive evaluation of bridges, II: Results, J. Structural Engng, 120, 290, 10.1061/(ASCE)0733-9445(1994)120:1(290)
Henry, 1976, Vibrations in cracked shafts, 15
Gasch, 1976, Dynamic behavior of a simple rotor with a cross-sectional crack, 123
Gasch, 1976, Dynamisches verhalten des Laval-Laufers mit angerissenem wellenguerschnitt, Vol. 269
Henry, 1978, Monitoring rotating machinery to detect the growth of rotor cracks. Colloquium on the design applications and maintenance of large industrial drives, 170, 37
Ziebarth, 1978, Auswirkung von querissen auf das schwingungsverhalten von Rotoren, VDI-Berichte, 320, 37
Ziebarth, 1981, Early detection of cross-sectional rotor cracks by turbine shaft vibration monitoring techniques, A.S.M. E., paper 81-JPGC-Pwr-26
Ziebarth, 1987, Auswirkungen von querrissen auf das schwingungsverhalten von Rotoren, VDI-Berichte, 320, 37
Mayes, 1976, The vibrational behaviour of a rotating shaft system containing a transverse crack
Mayes, 1977, Crack propagation in rotating shafts, A. S.M. E, Paper 77-DET-164
Mayes, 1980, A method of calculating the vibrational behavior of coupled rotating shafts containing a transverse crack, 17
Mayes, 1984, Analysis of the response of a multi-rotor-bearing system containing a transverse crack in a rotor, J. Vib. Acous. Stress Reliab. Design, 106, 139, 10.1115/1.3269142
Mayes, 1981, The application of vibration monitoring for fault diagnosis in large turbo-generation
Davies, 1984, The vibrational behavior of a multi-shaft, multi-bearing system in the presence of the propagating transverse crack, J. Vib. Acoust. Stress Reliab. Design, 106, 146, 10.1115/1.3269143
Grabowski, 1978, Schwingungsberechnung eines angerissenen turbinenlaufers, Vol. 320, 31
Grabowski, 1979, The vibrational behaviour of a turbine rotor containing a transverse crack, J. Mech. Design, 102, 140, 10.1115/1.3254704
Grabowski, 1980, The vibrational behavior of a turbine rotor containing a transverse crack, J. Mech. Design, 102, 140, 10.1115/1.3254704
Grabowski, 1982, Shaft vibrations in turbomachinery excited by cracks, Vol. 2250
Grabowski, 1982, Theoretical and experimental investigations of shaft vibrations in turbomachinery excited by cracks, 507
Grabowski, 1984, The vibrational behavior of a rotating shaft containing a transverse crack, Vol. 273, 423
Bently, 1981, Breakthroughs made in observing cracked shafts, Orbit, 2, 1
Bently, 1982, Detecting cracked shafts at earlier levels, Orbit, 3, 15
Bently, 1986, Vibration analysis techniques for detecting and diagnosing shaft cracks, Orbit, 7, 18
Bently, 1986, Early detection of shaft cracks on fluid-handling machines, 53
Bently, 1986, Detection of rotor cracks, 129
Bently, 1988, Vibration monitoring techniques and shaft crack detection on reactor coolant pumps and recirculation pumps
Muszynska, 1982, Shaft crack detection
Muszynska, 1985, Demonstration of various rotor instabilities, Vol. 2409, 409
Brutti, 1984, Theoretical analysis on dynamic behavior of cracked rotors, Vol. 2, 976
Bachschmid, 1984, The influence of unbalance on cracked rotors, 193
Bachschmid, 1983, A method for calculating the dynamic behavior of cracked shafts, 1343
Meyer, 1979, Zum Schwingungsverhalten einer Laval-Welle mit angerissenem Wellen-Querschnitt
Nilsson, 1982, On the vibrational behavior of a cracked rotor-bearing-system, 515
Nelson, 1986, The dynamics of a rotor system with a cracked shaft, J. Vib. Acoust. Stress Reliab. Design, 108, 189, 10.1115/1.3269321
Inagaki, 1980, Response analysis of a general asymmetric rotor-bearing system, J. Mech. Design, 102, 147, 10.1115/1.3254705
Inagaki, 1981, Transverse vibrations of a general cracked-rotor bearing system, J. Mech. Design, 104, 1
Inagaki, 1982, Transverse vibrations of a general cracked-rotor bearing system, J. Mech. Design, 104, 345, 10.1115/1.3256350
Inagaki, 1900, Transverse vibrations of cracked rotors (examples of crack detection and vibration analysis), Nippon Kikai Gakkai Ronbunshu C Hen, 56, 582
Ishida, 1988, Vibrations of a rotating shaft containing a transverse crack, JSME Int. J. Ser. III, 31, 22
Wauer, 1990, Modelling and formulation of equation of motion for cracked rotating shifts, Int. J. Solids Structures, 26, 901, 10.1016/0020-7683(90)90076-8
Sol, 1982, Vibration detection of a transverse crack in a rotating shaft, Report no. 155N-0077-5606. NRC/CNR-TT-2018
Baumgartner, 1982, Vibration monitoring criteria for early discernment of turbine rotor cracks
Armor, 1983, On-line monitoring of turbine-generator shaft cracking, A. S.M.E., Paper 83-JPGC-Pwr-7
Schmied, 1984, Vibrational behavior of a rotor with a cross-sectional crack, 183
Bohnstedt, 1985, Schaden and reparaturen an dampfturbinen, Maschinenschaden, 58, 81
Wang, 1987, The response of the simple rotor with surface transverse crack, Vol. 2, 595
Imam, 1987, Development of an on-line rotor crack detection and monitoring system, Vol. 2, 615
Imam, 1989, Development of an on-line rotor crack detection and monitoring system, J. Vib. Acoust. Stress Reliab. Design, 111, 241, 10.1115/1.3269848
Kowal, 1989, Monitoring for shaft cracks on reactor recirculation pumps, J. Sound Vibration, 23, 12
Rajab, 1991, Vibrational characteristics of cracked shafts, J. Sound Vibration, 147, 465, 10.1016/0022-460X(91)90494-5
Scheibel, 1990, Expert system-based, on-line rotor crack monitor for utility steam turbines, 51, 369
Huang, 1993, Vibration and stability of a rotating shaft containing a transverse crack, J. Sound Vibration, 162, 387, 10.1006/jsvi.1993.1129
Sekhar, 1994, Transient analysis of a cracked rotor passing through critical speed, J. Sound Vibration, 173, 415, 10.1006/jsvi.1994.1238
Sekhar, 1992, Crack detection and vibration characteristics of cracked shafts, J. Sound Vibration, 157, 375, 10.1016/0022-460X(92)90690-Y
Southgate, 1988, Trouble shooting using modal testing—the case of the cracked centrifuge, Vol. 2, 1270
McCloskey, 1990, Troubleshooting rotating machinery vibration problems, Power Engng, 94, 30
Ratan, 1993, On-line identification and location of rotor cracks, A. S.M. E., DE, 54, 161
Mahrenholz, 1983, The dynamical behaviour of cracked rotors, 35
Collins, 1991, Detection of cracks in rotating Timoshenko shafts using axial impulses, J. Vib. Acoust., 113, 74, 10.1115/1.2930158
Meng, 1992, The nonlinear influence of whirl speed on the stability and responses of a cracked rotor, Machine Vibration, 1, 216
Söffker, 1993, Crack detection in turbo rotors—vibrational analysis and fault detection, Vol. 60, 277
Gash, 1988, Dynamic behaviour of the laval rotor with a cracked hollow shaft: a comparison of crack models, 463
Tamura, 1988, Unstable vibration of a rotor with transverse crack, 647
Wen, 1988, Theoretical research, calculations and experiments of cracked shaft dynamic response, 473
San Juan, 1990, Experimental and analytical study of shaft cracking response of rotatory machines, Vol. 1, 445
Chen, 1991, Whirl speeds and unbalance response of a shaft disk system with flaws, Analytical Experimental Modal Analysis, 6, 279
Abraham, 1992, A piecewise linear approach for the modelling of a breathing crack, Vol. 1, 417
Gao, 1992, The resonance of a vertical rotor containing a transverse crack, Acta Mech. Sol. Sinica, 5, 167
Leon, 1990, Monitoring systems for steam turbine blade faults, J. Sound Vibration, 24, 12
Chen, 1993, Vibrational analyses of cracked pre-twisted blades, Comput. Structures, 46, 133, 10.1016/0045-7949(93)90173-B
Datta, 1990, Vibration characteristics of a rotating blade with localized damage and including the effects of shear deformation and rotary inertia, Comp. Structures, 36, 1129, 10.1016/0045-7949(90)90221-M
Inagaki, 1990, Vibration analysis of cracked turbine and compressor blades, A. S.M.E., Paper 90-GT-5
Ostachowicz, 1992, Natural frequency of a cracked turbine-blade, Vol. 0–377
Wauer, 1992, Vibrations of cracked rotating blades, Machine Vibration, 1, 126
Chen, 1993, Vibrational analyses of cracked pre-twisted blades, Comput. Structures, 46, 133, 10.1016/0045-7949(93)90173-B
Yao, 1988, Vibration of a circular ring with a transverse crack, A. S.M.E., Paper 88-WA/DSC-42
Moshrefi, 1985, The transverse behavior of a peripherally cracked pipe and a uniformly corroded pipe
Moshrefi, 1985, The transverse vibration characteristics of an externally damaged pipe, 23
Hale, 1984, Dynamic test of cracked pipe components, J. Press. Vess. Technol., 106, 37, 10.1115/1.3264307
Srinivasan, 1992, Effect of damage on the modal parameters of a cylindrical shell, Vol. 1, 529
Dimarogonas, 1983, Vibration of cracked shafts in bending, J. Sound Vibration, 91, 583, 10.1016/0022-460X(83)90834-9
Dimarogonas, 1987, Modeling damaged structural members for vibration analysis, J. Sound Vibration, 225
Dimarogonas, 1988, Crack detection in turbine rotors, Vol. 2, 286
Dimarogonas, 1990, Identification of cracks in rotors
Dimarogonas, 1992, Bilinear analysis of closing cracks in rotating shafts, ISROMAC-4
Suherman, 1993, Flexural-torsional response of a cracked rotating shaft with a disk during passage through a critical speed, A. S.M. E., DE, 56, 287
Carlson, 1974, An experimental study of the parametric excitation of a tensioned sheet with a cracklike opening, Exp. Mech., 14, 452, 10.1007/BF02324026
Imbrahim, 1987, Modeling of dynamics of continuous beams including nonlinear fatigue crack, Int. J. Anal. Exp. Modal Anal., 2, 76
Chen, 1988, Vibration and stability of cracked thick rotating blades, Comput. Structures, 28, 67, 10.1016/0045-7949(88)90093-4
Actis, 1989, Non-linear effects due to closing cracks in vibrating beams
Lee, 1992, Modeling of a simple rotor with a switching crack and its experimental verification, J. Vib. Acoust., 114, 217, 10.1115/1.2930251
Chu, 1992, Analysis of forced bilinear oscillators and the application to cracked beam dynamics, A. I.A. A. J., 30, 2512
Jun, 1992, Modelling and vibration analysis of a simple rotor with a breathing crack, J. Sound Vibration, 155, 273, 10.1016/0022-460X(92)90511-U
Collins, 1992, Free and forced longitudinal vibrations of a cantilevered bar with a crack, J. Vib. Acoust. Stress Reliab. Design, 114, 171, 10.1115/1.2930246
Shen, 1992, Eigensolutions of a two-dimensional, finite, linear elastic solid containing cracks under anti-plane strain vibration, A. S.M. E., PVP, 248, 19
Ambartsumyan, 1966, The different-modulus theory of elasticity, Mech. Solids, 1, 64
Khachatryan, 1967, Longitudinal vibrations of prismatic bars made of different-modulus materials, Mech. Solids, 2, 140
Lenkov, 1969, Vol. 5, 119
Green, 1977, Torsion and extension of a tube with different moduli in tension and compression, J. Inst. Maths Applies, 20, 221, 10.1093/imamat/20.2.221
Paolinelis, 1979, Three-point bending at large deflections of beams with different moduli of elasticity in tension and compression, J. Test. Eval. JTEVA, 7, 177, 10.1520/JTE11221J
Bert, 1982, Vibration of cylindrical shells of bimodulus composite materials, J. Sound Vibration, 81, 107, 10.1016/0022-460X(82)90180-8
Tran, 1982, Bending of thick beams of bimodulus materials, Comput. Structures, 15, 627, 10.1016/S0045-7949(82)80003-5
Doong, 1984, Axisymmetric vibration of an initially stressed bimodulus thick circular plate, J. Sound Vibration, 94, 461
Dimarogonas, 1992
Dimarogonas, 1993
Dawicke, 1990, Three-dimensional crack closure behavior, Engng Fracture Mech., 24, 111, 10.1016/0013-7944(90)90101-L
Ichimonji, 1988, The dynamics of a rotor system with a shaft having a slant crack, J. S.M. E., Int. J. Ser. III, 31, 712
Alampalii, 1992, Modal analysis as a bridge inspection tool, 1359
Rytter, 1993, Vibrational based inspection of civil engineering structures
Michalski, 1983, A theory and methodology of inductive learning, Vol. 1
Minsky, 1969
Shore, 1980, Turbomachinery problems and their correction, Sawyers Turbomachinery Maintenance Handbook, Vol. 2
Keim, 1989, Application of an expert system for diagnosis of rotordynamic problems in turbomachinery
Dimarogonas, 1993, Interval analysis of an artificial neural network for diagnosis of turbomachinery incipient failures
Silver, 1987, Functional requirements for a fuzzy expert system shell
Zadeh, 1973, Outline to a new approach to the analysis of complex systems and decision process, I. E.E. E. Trans. Sys. Man. and Cybern., SMC-3, 28, 10.1109/TSMC.1973.5408575
Yao, 1991, A Consistent Cracked Bar Vibration Theory
Chondros, T., Dimarogonas, A. D. and Yao, J. Y., Longitudinal vibration of a cracked bar. Engng Fracture Mech. (to be published).