Vibration analysis and control technologies of hydraulic pipeline system in aircraft: A review

Wang, 2016, 53

Gao, 2016, A model reduction approach for the vibration analysis of hydraulic pipeline system in aircraft, Aerosp Sci Technol, 49, 144, 10.1016/j.ast.2015.12.002

Robert, 2005, High-pressure hydraulics for the A380, Overhand Maintenance, 18, 43

Moir, 2011, 137

Lv, 2017, A practical approach for evaluating safe fatigue life of hydraulic actuator in helicopter based on a nominal force concept and minimal datasets, Aerosp Sci Technol, 62, 158, 10.1016/j.ast.2016.12.005

Li, 2013, Flow field and pressure loss analysis of junction and its structure optimization of aircraft hydraulic pipe system, Chinese J Aeronaut, 26, 1080, 10.1016/j.cja.2013.04.004

Emadi, 2000, Aircraft power systems: technology, state of the art, and future trends, IEEE Aerosp Electron Syst Mag, 15, 28, 10.1109/62.821660

Shang, 2018, An integrated load sensing valve-controlled actuator based on power-by-wire for aircraft structural test, Aerosp Sci Technol, 77, 117, 10.1016/j.ast.2018.02.030

Li, 2017, Fault diagnosis and location of the aero-engine hydraulic pipeline based on Kalman filter, Adv Mech Eng, 9, 1, 10.1177/1687814017742811

Gomes, 2018, Using degradation messages to predict hydraulic system failures in a commercial aircraft, IEEE Trans Autom Sci Eng, 15, 214, 10.1109/TASE.2016.2601261

Jani, 2019, An overview on aircraft hydraulic system, Renew Sustain Energy Rev, 6, 29

Green, 1985, 10

Lu, 2017, A multi-source information fusion fault diagnosis for aviation hydraulic pump based on the new evidence similarity distance, Aerosp Sci Technol, 71, 392, 10.1016/j.ast.2017.09.040

Jiao, 2017, An integrated self-energized brake system for aircrafts based on a switching valve control, Aerosp Sci Technol, 60, 20, 10.1016/j.ast.2016.10.021

Mehmood, 2020, Analysis of premature failure of aircraft hydraulic pipes, Eng Fail Anal, 109, 10.1016/j.engfailanal.2019.104356

Wiggert, 1987, Analysis of liquid and structural transients in piping by the method of characteristics, J Fluids Eng Trans ASME, 109, 161, 10.1115/1.3242638

Lesmez, 1990, Modal analysis of vibrations in liquid-filled piping systems, J Fluids Eng Trans ASME, 109, 311, 10.1115/1.2909406

Lavooij, 1991, Fluid-structure interaction in liquid-filled piping systems, J Fluids Struct, 5, 573, 10.1016/S0889-9746(05)80006-4

Tijsseling, 1996, Fluid-structure interaction in liquid-filled pipe systems: A review, J Fluids Struct, 10, 109, 10.1006/jfls.1996.0009

Streeter, 1967

Wiggert, 1985, The effect of elbow restraint on pressure transients, J Fluids Eng Trans ASME, 107, 402, 10.1115/1.3242500

Tijsseling, 2003, Exact solution of linear hyperbolic four-equation system in axial liquid-pipe vibration, J Fluids Struct, 18, 179, 10.1016/j.jfluidstructs.2003.07.001

Xu, 2017, Exact solution of axial liquid-pipe vibration with time-line interpolation, J Fluids Struct, 70, 500, 10.1016/j.jfluidstructs.2016.12.011

Xu, 2014, Frequency modelling and solution of fluid-structure interaction in complex pipelines, J Sound Vib, 333, 2800, 10.1016/j.jsv.2013.12.023

Ouyang, 2012, Modal analysis of the aircraft hydraulic-system pipeline, J Aircr, 49, 1168, 10.2514/1.C031660

Wang, 2019, A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions, Chinese J Aeronaut, 32, 2566, 10.1016/j.cja.2019.03.041

Gao, 2019, Dynamic response analysis of aero hydraulic pipeline system under pump fluid pressure fluctuation, Proc Inst Mech Eng Part G J Aerosp Eng, 233, 1585, 10.1177/0954410018756697

Ouyang, 2012, Two-dimensional stress analysis of the aircraft hydraulic system pipeline, Proc Inst Mech Eng Part G J Aerosp Eng, 226, 532, 10.1177/0954410011413011

Jiao, 1997, Vibration analysis of aircraft fluid power and pipeline systems, J Beijing Univ Aeronaut Astronaut, 23, 316

Zhang, 2019, Fluid-structure-interaction analysis of an aero hydraulic pipe considering friction coupling, IEEE Access, 7, 26665, 10.1109/ACCESS.2018.2890442

Liu, 2010, Pressure pulsation analysis of aircraft hydraulic power pipelines system, Adv Mater Res, 97–101, 2861, 10.4028/www.scientific.net/AMR.97-101.2861

Zhang, 2013, Reliability design for impact vibration of hydraulic pressure pipeline systems, Chinese J Mech Eng, 05, 216

Kang, 2015, Vibration response analysis of external pipeline of aeroengine, Aeroengine, 41, 50

Liu, 2010, Dynamic reliability of aircraft hydraulic pipelines under random pressure pulsation and vibration, Multidiscip Model Mater Struct, 6, 493, 10.1108/15736101011095154

Quan, 2016, Acceleration load response analysis for elastically supported aviation hydraulic pipe-lines, J Vib Shock, 35, 209

Zhai, 2011, Dynamic response of pipeline conveying fluid to random excitation, Nucl Eng Des, 241, 2744, 10.1016/j.nucengdes.2011.06.024

Li, 2011, Modal analysis of two typical fluid-filled pipes in aircraft, 462

Wang, 1998, Vibration and pressure fluctuation in a flexible hydraulic power system on an aircraft, Comput Fluids, 27, 1, 10.1016/S0045-7930(97)00033-9

Kojima, 1984, Fluid transient phenomena accompanied with column separation in fluid power pipeline, Bull JSME, 27, 2421, 10.1299/jsme1958.27.2421

Bergant, 2006, Water hammer with column separation: A historical review, J Fluids Struct, 22, 135, 10.1016/j.jfluidstructs.2005.08.008

Shu, 2003, Modelling vaporous cavitation on fluid transients, Int J Press Vessel Pip, 80, 187, 10.1016/S0308-0161(03)00025-5

Li, 2005, Simulation of hydraulic pipeline pressure transient using Matlab Simulink, 468

Li, 2008, Modeling of hydraulic pipeline transients accompanied with cavitation and gas bubbles using parallel genetic algorithms, J Appl Mech Trans ASME, 75, 10.1115/1.2912934

Jiang, 2012, Modeling and simulation of low pressure oil-hydraulic pipeline transients, Comput Fluids, 67, 79, 10.1016/j.compfluid.2012.07.005

Jiang, 2005, Experimental study on pressure transients with cavitation in low pressure water-hydraulic pipeline, 1

Jiang, 2018, Pressure transient model of water-hydraulic pipelines with cavitation, Appl Sci, 8, 388, 10.3390/app8030388

Wylie, 1993

Shu, 2003, A finite element model and electronic analogue of pipeline pressure transients with frequency-dependent friction, J Fluids Eng Trans ASME, 125, 194, 10.1115/1.1522415

Jiang, 2006, Simulation of hydraulic pipeline pressure transients accompanying cavitation and gas bubbles using Matlab/Simulink, 657

Main, 2020, Fatigue crack growth lessons from thirty-five years of the Royal Australian Air Force F/A-18 A/B Hornet Aircraft Structural Integrity Program, Int J Fatigue, 133, 10.1016/j.ijfatigue.2019.105426

Panda, 2013, Fatigue failure of weld joint of afterburner fuel manifold of a jet engine, Eng Fail Anal, 30, 138, 10.1016/j.engfailanal.2013.01.022

Liu, 2017, Prevention and crack analysis on hydraulic pipe for a certain type of aircraft, Aviat Maint Eng, 2, 76

Lu, 2008, Vibration faults modes, mechanism and solving methods in the hydraulic pipeline system of aircraft, J Vib Eng, 9, 78

Zhang, 2019, The analysis and estimation of vibration fatigue for pipe fitting in aviation hydraulic system, Eng Fail Anal, 105, 837, 10.1016/j.engfailanal.2019.07.038

Wang, 2019, Performance reliability of jet pipe servo valve under random vibration environment, Mechatronics, 64, 10.1016/j.mechatronics.2019.102286

Zhang, 2019, Failure analysis of a high-pressure fuel pipe of engine, Eng Fail Anal, 103, 70, 10.1016/j.engfailanal.2019.04.040

Adib, 2007, Aircraft engine bleed system tubes: Material and failure mode analysis, Eng Fail Anal, 14, 1605, 10.1016/j.engfailanal.2006.11.053

Sun, 2017, Analysis on hydraulic system lines failure for B737CL, Aviat Maint Eng, 9, 92

Wang, 2013, Analysis on typical troubleshooting of MA600 hydraulic system, Aviat Maint Eng, 5, 88

Jun, 2018, Study on fatigue life of aircraft hydraulic pipeline under stress damage of water hammer and vibration, 1

Liu, 2019, Fracture failure analysis of clamp for an aero engine, Aeroengine, 45, 77

Zheng, 2014, Failure analysis of clamps for aviation, Aircraft Design, 34, 71

Xiao, 2012, Failure analysis of clamp of bending tube in engine, Fail Anal Prev, 7, 248

Li, 2017, Damage on aluminum alloy-nitrile rubber aeronautic clamp with cushion in typical environments, Equip Environ Eng, 14, 65

Essam, 2015, Failure and fatigue life estimate of a pre-stressed aircraft seat support tube, Eng Fail Anal, 54, 120, 10.1016/j.engfailanal.2015.04.001

Sujata, 2013, Fretting fatigue in aircraft components made of Ti-Al-V alloys, Procedia Eng, 55, 481, 10.1016/j.proeng.2013.03.284

Liu T, Li S, Pang Y, et al. Investigation on fuel manifold bracket fracture failure for an aero-engine. Gas Turbine Experiment and Research 2015; 28(4): 23-6 [Chinese].

Li, 2013, Fracture analysis of aero-engine cited trachea clamp, Fail Anal Prev, 8, 167

Gurgen, 2016, Fatigue failure in aircraft structural components, 261

Bhaumik, 2008, Fatigue failure of aircraft components, Eng Fail Anal, 15, 675, 10.1016/j.engfailanal.2007.10.001

Ulanov, 2016, Calculation method of pipeline vibration with damping supports made of the MR material, Procedia Eng, 150, 101, 10.1016/j.proeng.2016.06.725

Bezborodov, 2017, Calculation of vibration of pipeline bundle with damping support made of MR material, Procedia Eng, 176, 169, 10.1016/j.proeng.2017.02.285

Lazutkin, 2017, Design of elastic-damping supports made of MR material for pipeline supports, Procedia Eng, 176, 326, 10.1016/j.proeng.2017.02.329

Jiang, 2004, Research on dynamic and static characteristics of metal rubber isolator used in aero-engine, Acta Aeronaut Astronaut Sin, 25, 140

Ulanov, 2014, Life-time of vibration insulators made of metal rubber material under random load, Res J Appl Sci, 9, 664

Ulanov AM, Bezborodov SA. Wearing of MR wire vibration insulation material under random load. Proceedings of the 4th international conference on industrial engineering and applications; 2017 April 21-23; Nagoya, Japan. New York: Springer; 2019.

Chen, 2001, Damping characteristics of thin metal rubber damper for aeroengine piping system, J Aerosp Power, 16, 175

Li, 2017, Research on equivalent stiffness and influence factors of aero-clamps for aircraft hydraulic pipelines, Mech Sci Technol Aerosp Eng, 36, 1472

Chai, 2019, Calculation of natural characteristics and experimental methods of the clamp-pipe system, J Aerosp Power, 34, 76

Gao, 2019, Inverse identification of the mechanical parameters of a pipeline hoop and analysis of the effect of preload, Front Mech Eng, 14, 358, 10.1007/s11465-019-0539-9

Guo, 2020, Uncertain frequency responses of clamp-pipeline systems using an interval-based method, IEEE Access, 8, 29370, 10.1109/ACCESS.2020.2972396

Wang, 2014, Effect of clamp on aircraft hydraulic pipeline dynamic stress, Aeronaut Comput Tech, 44, 64

Li, 2015, Dynamic characteristics of fluid-conveying pipes with piecewise linear support, Int J Struct Stab Dyn, 16, 1550025, 10.1142/S021945541550025X

Hu, 2018, Compressive mechanical behavior of multiple wire metal rubber, Mater Des, 140, 231, 10.1016/j.matdes.2017.11.046

Li, 2016, Dynamic characteristics of aero-engine pipe system considering fluid-structure coupling, J Aerosp Power, 31, 2346

Li, 2015, Simulation analysis and parameter optimization of vibration isolation of metal rubber clamps based on the modified PSO, CAAI Trans Intell Syst, 10, 599

Li, 2011, Simulation and optimized layout analysis of hydraulic power system in aircraft, 93

Zhai, 2010, Supports’ dynamical optimized design for the external pipeline of aircraft engine, Adv Mater Res, 139, 2456, 10.4028/www.scientific.net/AMR.139-141.2456

Zhu, 2006, Maximization of structural natural frequency with optimal support layout, Struct Multidiscip Optim, 31, 462, 10.1007/s00158-005-0593-2

Kwong, 1998, A method to reduce noise in hydraulic systems by optimizing pipe clamp locations, Proc Inst Mech Eng Part I J Syst Control Eng, 212, 267

Tang, 2011, Optimal design of the positions of the hoops for a hydraulic pipelines system, Nucl Eng Des, 241, 4840, 10.1016/j.nucengdes.2011.08.058

Liu, 2012, Sensitivity analysis and dynamic optimization design of supports positions for engine pipelines, J Aerosp Power, 27, 2756

Zhang, 2019, Optimization design of aeronautical hydraulic pipe-line system based on non-probabilistic sensitivity analysis, Proc Inst Mech Eng Part O J Risk Reliab, 233, 1

Gao, 2020, A novel optimization layout method for clamps in a pipeline system, Appl Sci, 10, 390, 10.3390/app10010390

Chen, 2002, Piping system design of aero-engine using genetic algorithms, J Aerosp Power, 17, 421

Zhou, 2019, Sensitivity analysis for probabilistic anti-resonance design of aeronautical hydraulic pipelines, Chinese J Aeronaut, 32, 948, 10.1016/j.cja.2019.01.001

Rongong J. Shear and extensional behavior of passive and active constrained layer damping [dissertation]. Sheffield: University of Sheffield; 2002.

Gao, 2018, Vibration and damping analysis of aerospace pipeline conveying fluid with constrained layer damping treatment, Proc Inst Mech Eng Part G J Aerosp Eng, 232, 1529, 10.1177/0954410017692367

Bi, 2016, Numerical simulation on the effectiveness of using viscoelastic materials to mitigate seismic induced vibrations of above-ground pipelines, Eng Struct, 123, 1, 10.1016/j.engstruct.2016.05.022

Yano, 2019, Vibration analysis of viscoelastic damping material attached to a cylindrical pipe by added mass and added damping, J Sound Vib, 454, 14, 10.1016/j.jsv.2019.04.023

Ishikawa, 2020, Design of a disc-shaped viscoelastic damping material attached to a cylindrical pipe as a dynamic absorber or Houde damper, J Sound Vib, 475, 10.1016/j.jsv.2020.115272

Yang, 2017, Tuning method for pipeline vibration absorbers based on anti-resonance principle, Noise Vib Control, 37, 55

Zhou, 2015, Study and experimental verification on a dynamic vibration absorber with frequency adjustable, Noise Vib Control, 35, 217

Jiang, 2017, Experimental studies on the effectiveness and robustness of a pounding tuned mass damper for vibration suppression of a submerged cylindrical pipe, Struct Control Heal Monit, 24, 1

Yu, 2018, Design of a particle damping absorber and experimental study on vibration damping of the pipe, Acta Aeronaut Astronaut Sin, 39, 422264

Yang, 2016, Experimental study on frequency band of dynamic vibration absorber in pipe systems, 1

Li, 2017, On vibration suppression and energy dissipation using tuned mass particle damper, J Vib Acoust Trans ASME, 139, 10.1115/1.4034777

Fu, 2012, The development of fluctuation attenuation technology for aviation hydraulic system, Chinese Hydraul Pneumat, 2, 3

Kim, 2005, Reduction of pressure ripples using a parallel line in hydraulic pipeline, Int J Automot Technol, 6, 65

Gao, 2013, A novel pulsation attenuator for aircraft piston pump, Mechatronics, 23, 566, 10.1016/j.mechatronics.2013.05.004

Chai, 2016, A compact design of pulsation attenuator for hydraulic pumps, 1111

Ijas M. Damping of low frequency pressure oscillation [dissertation]. Tampere: Tampere University of Technology; 2007.

Ramamoorthy, 2002, A theoretical study of structural acoustic silencers for hydraulic systems, J Acoust Soc Am, 111, 2097, 10.1121/1.1466866

Guan, 2012, Development research of reflection-absorption compound type fluid pulsation attenuator, 606

Guan, 2012, Modeling and optimal design of 3 degrees of freedom Helmholtz resonator in hydraulic system, Chinese J Aeronaut, 25, 776, 10.1016/S1000-9361(11)60444-5

Yang, 2018, Filtering performance and optimization of double-chamber compound hydraulic attenuators, Proc Inst Mech Eng Part C J Mech Eng Sci, 232, 3250, 10.1177/0954406217733293

Zhu, 2014, Investigations on pulsation-reduction characteristics of hydraulic attenuator based on experimental method, 1

Earnhart, 2012, Compact Helmholtz resonators for hydraulic systems, Int J Fluid Power, 13, 41, 10.1080/14399776.2012.10781045

Mikota, 2001, A novel, compact pulsation compensator to reduce pressure pulsations in hydraulic systems, World Sci, 45, 69

Tuc B. The use of flexible hoses for reducing pressure ripple in hydraulic systems [dissertation]. Claverton Down: University of Bath; 1981.

Longmore, 1991, Transmission of vibration and pressure fluctuations through hydraulic hoses, Proc Inst Mech Eng Part I J Syst Control Eng, 205, 97

Johnston, 2006, A time-domain model of axial wave propagation in liquid-filled flexible hoses, Proc Inst Mech Eng Part I J Syst Control Eng, 220, 517

Li, 2015, Title installation design for hydraulic hoses in civil aircraft, Aeronaut Sci Technol, 26, 33

Li, 2015, Attenuating characteristics of a multi-element buffer bottle in an aircraft piston pump, Proc Inst Mech Eng Part C J Mech Eng Sci, 46, 1

Ke, 2013, Suppression technique of pressure pulsation for high-pressure pump, Chinese Hydraul Pneumat, 10, 90

Guo, 2011, Pressure fluctuation analysis and suppression of hydraulic energy system, Chinese Hydraul Pneumat, 11, 53

Seeniraj, 2011, Effect of combining precompression grooves, PCFV and DCFV on pump noise generation, Int J Fluid Power, 12, 53, 10.1080/14399776.2011.10781037

Xu, 2015, A new design method for the transition region of the valve plate for an axial piston pump, J Zhejiang Univ Sci A, 16, 229, 10.1631/jzus.A1400266

Manring, 2004, The impact of using a secondary swash-plate angle within an axial piston pump, J Dyn Syst Meas Control Trans ASME, 126, 65, 10.1115/1.1648313

Li, 2006, Research actuality and prospect of active control of hydraulic fluid fluctuation, Mach Tool Hydraul, 9, 243

Kartha S. Active, passive and active/passive control techniques for reduction of vibrational power flow in fluid filled pipes [dissertation]. Blacksburg: Virginia Polytechnic Institute and State University; 2000.

Kojima, 1991, Development of an active attenuator for pressure pulsation in liquid piping systems: A real time-measuring method of progressive wave in a pipe, JSME Int Journal, Ser 2 Fluids Eng Heat Transf Power, Combust Thermophys Prop, 34, 466

Kojima, 1993, Development of an active attenuator for pressure pulsation in liquid piping systems. Trial construction of the system and fundamental experiments on attenuation characteristics, JSME Int J, Ser B Fluids Therm Eng, 36, 230, 10.1299/jsmeb.36.230

Yokota, 1996, Study on an active accumulator: active control of high-frequency pulsation of flow rate in hydraulic systems, Trans Japan Soc Mech Eng Ser B, 39, 119

Luo, 2011, Semi-active accumulator absorbing pressure pulsation in high-pressure water-jet propulsion system, Proc Inst Mech Eng Part C J Mech Eng Sci, 225, 2052, 10.1177/0954406211405925

Guan, 2014, Active control of fluid pressure pulsation in hydraulic pipe system by bilateral-overflow of piezoelectric direct-drive slide valve, J Dyn Syst Meas Control Trans ASME, 136

Jiao, 2002, Theoretical study on vibration active control of power supply and pipeline systems, J Beijing Univ Aeronaut Astronaut, 28, 465

Jiao, 2003, Adaptive vibration active control of fluid pressure pulsations, Proc Inst Mech Eng Part I J Syst Control Eng, 217, 311

Ouyang, 2006, Active control on fluid borne pulsation using piezoelectric valve as absorber, 686

Pan, 2013, Active control of pressure pulsation in a piping system using measured dynamic flow rate, 4423

Pan, 2013, Active control of pressure pulsation in a switched inertance hydraulic system, Proc Inst Mech Eng Part I J Syst Control Eng, 227, 610

Pan M. Active control of pressure pulsation in a switched inertance hydraulic system [dissertation]. Claverton Down: University of Bath; 2012.

Brennan, 1996, A non-intrusive fluid-wave actuator and sensor pair for the active control of fluid-borne vibrations in a pipe, Smart Mater Struct, 5, 281, 10.1088/0964-1726/5/3/006

Maillard, 1999, Fluid wave actuator for the active control of hydraulic pulsations in piping systems, 1806

Lin, 1996, Active flutter control of a cantilever tube conveying fluid using piezoelectric actuators, J Sound Vib, 196, 97, 10.1006/jsvi.1996.0470

Lin, 1997, Non-linear active vibration control of a cantilever pipe conveying fluid, J Sound Vib, 202, 477, 10.1006/jsvi.1996.0858

Tsai, 1997, Adaptive modal vibration control of a fluid-conveying cantilever pipe, J Fluids Struct, 11, 535, 10.1006/jfls.1997.0092

Doki, 1998, Active control of cantilevered pipes conveying fluid with constraints on input energy, J Fluids Struct, 12, 615, 10.1006/jfls.1997.0154

Elvin, 2009, The flutter response of a piezoelectrically damped cantilever pipe, J Intell Mater Syst Struct, 20, 2017, 10.1177/1045389X09345557

Ro, 1997, Vibration control of tubes with internally moving loads using active constrained layer damping, 1

Wang, 2005, Coupled vibration control of cylindrical shells partially treated with active constrained layer damping, Chinese J Appl Mech, 22, 545

Panda, 2018, A design of active constrained layer damping treatment for vibration control of circular cylindrical shell structure, J Vib Control, 24, 5811, 10.1177/1077546316670071

Zhai, 2019, Vibration control of an aero pipeline system with active constraint layer damping treatment, Appl Sci, 9, 2094, 10.3390/app9102094

Li, 2019, Dynamic response and vibration suppression of a cantilevered pipe conveying fluid under periodic excitation, J Vib Control, 25, 1695, 10.1177/1077546319837789

Pan, 2018, Novel integrated control of fluid-borne noise in hydraulic systems, 1

Aly, 2015, An artificial neural network flow control of variable displacement piston pump with pressure compensation, Int J Control Autom Syst, 4, 1

Ji, 2016, Active vibration control of a hoop truss structure with piezoelectric bending actuators based on a fuzzy logic algorithm, Hydraul Pneumat Seals, 36, 17

Shaharuddin, 2013, Fuzzy-PID control of transverse vibrating pipe due to vortex induced vibration, 21

Jafari, 2019, Control of flow rate in pipeline using PID controller, 293

Khajehpour, 2015, Vibration suppression of a rotating flexible cantilever pipe conveying fluid using piezoelectric layers, Lat Am J Solids Struct, 12, 1042, 10.1590/1679-78251535

Mamaghani, 2016, Vibration control of a pipe conveying fluid under external periodic excitation using a nonlinear energy sink, Nonlinear Dyn, 86, 1761, 10.1007/s11071-016-2992-x

Yang, 2019, Enhanced targeted energy transfer for adaptive vibration suppression of pipes conveying fluid, Nonlinear Dyn, 97, 1937, 10.1007/s11071-018-4581-7