Vertical Dynamic Responses of the Cantilever Deck of a Long-Span Continuous Bridge and the Coupled Moving Trains
Tóm tắt
It may be necessary to arrange railway traffic on the outer edge of the cantilever deck of a box girder bridge for the sake of transportation planning. A continuous box girder bridge was designed in China to carry a single-track urban rail transit traffic on the cantilever deck of the bridge and three-lane highway traffic on the other part of the deck. In order to investigate the possible resonant responses of the coupled train–bridge system, the resonance condition of the cantilever deck under moving train loads is discussed analytically, and then numerical analyses of the vertical train–bridge dynamic interaction considering local vibration of the cantilever decks are carried out. The degrees of freedom of the bridge modeled by shell elements are so large that mode superposition method is used to reduce the computation efforts. It is found that the resonance speed of the cantilever deck predicted by the analytical method is 305 km/h, which agrees well with the numerical result. The numerically computed results also indicate that the serviceability of the bridge deck and the ride quality of the railway vehicles in the vertical direction are in good condition below the critical speed of 200 km/h.
Tài liệu tham khảo
Ju SH, Lin HT (2003) Resonance characteristics of high-speed trains passing simply supported bridges. J Sound Vib 267:1127–1141
Xia H, Zhang N, Guo WW (2006) Analysis of resonance mechanism and conditions of train–bridge system. J Sound Vib 297:810–822
Yau J-D (2001) Resonance of continuous bridges due to high speed trains. J Mar Sci Technol 9:14–20
Yau JD, Wu YS, Yang YB (2001) Impact response of bridges with elastic bearings to moving loads. J Sound Vib 248:9–30
Yang YB, Yau JD (1997) Vibration of simple beams due to trains moving at high speeds. Eng Struct 19:936–944
Yang Y, Yau J (2017) Resonance of high-speed trains moving over a series of simple or continuous beams with non-ballasted tracks. Eng Struct 143:295–305
Song MK, Noh HC, Choi CK (2003) A new three-dimensional finite element analysis model of high-speed train–bridge interactions. Eng Struct 25:1611–1626
Lee Y-S, Kim S-H, Jung J (2005) Three-dimensional finite element analysis model of high-speed train-track-bridge dynamic interactions. Adv Struct Eng 8:513–528
Yang J, Ouyang H, Stancioiu D (2017) Numerical studies of vibration of four-span continuous plate with rails excited by moving car with experimental validation. Int J Struct Stab Dyn 17:1750119
Yang SC, Hwang SH (2016) Train-track-bridge interaction by coupling direct stiffness method and mode superposition method. J Bridge Eng 21:04016058
Li Q, Xu YL, Wu DJ, Chen ZW (2010) Computer-aided nonlinear vehicle–bridge interaction analysis. J Vib Control 16:1791–1816
Wu YS, Yang YB, Yau JD (2001) Three-dimensional analysis of train-rail-bridge interaction problems. Veh Syst Dyn 36:1–35
Zhai W (2007) Vehicle-track coupling dynamics, 3rd edn. China Railway Press, Bei Jing (in Chinese)
European Committee for Standardization (CEN) (2002) Eurocode 1: actions on structures, part 2: traffic loads on bridges. Belgium, Brussels