Ventilation performance prediction for buildings: A method overview and recent applications
Tóm tắt
Từ khóa
Tài liệu tham khảo
Fitzgerald, 2008, The influence of stacks on flow patterns and stratification associated with natural ventilation, Building and Environment, 43, 1719, 10.1016/j.buildenv.2007.10.021
Mazumdar S, Chen Q. A one-dimensional analytical model for airborne contaminant transport in airliner cabins. Indoor Air; accepted for publication.
Holford, 2007, On the thermal buffering of naturally ventilated buildings through internal thermal mass, Journal of Fluid Mechanics, 580, 3, 10.1017/S0022112007005320
Bassiouny, 2008, An analytical and numerical study of solar chimney use for room natural ventilation, Energy and Buildings, 40, 865, 10.1016/j.enbuild.2007.06.005
Halios, 2007, On the estimation of characteristic indoor air quality parameters using analytical and numerical methods, Science of the Total Environment, 381, 222, 10.1016/j.scitotenv.2007.03.012
Coffey, 2007, Ventilation effectiveness measures based on heat removal: part 2. Application to natural ventilation flows, Building and Environment, 42, 2249, 10.1016/j.buildenv.2006.03.015
Wu, 2007, Model-based analysis and simulation of airflow control systems of ventilation units in building environments, Building and Environment, 42, 203, 10.1016/j.buildenv.2005.08.031
Cho, 2008, Theoretical and experimental investigation of wall confluent jets ventilation and comparison with wall displacement ventilation, Building and Environment, 43, 1091, 10.1016/j.buildenv.2007.02.006
Cornick, 2008, A comparison of empirical indoor relative humidity models with measured data, Journal of Building Physics, 31, 243, 10.1177/1744259107081699
Hayden, 2007, Development of an empirical model to aid in designing airborne infection isolation rooms, Journal of Occupational and Environmental Hygiene, 4, 198, 10.1080/15459620601177370
Bastide, 2007, Natural ventilation – a new method based on the Walton model applied to cross-ventilated buildings having two large external openings, International Journal of Ventilation, 6, 195, 10.1080/14733315.2007.11683777
Mahdavi, 2008, A model-based approach to natural ventilation, Building and Environment, 43, 620, 10.1016/j.buildenv.2006.06.023
Nazaroff, 2008, Inhalation intake fraction of pollutants from episodic indoor emissions, Building and Environment, 43, 269, 10.1016/j.buildenv.2006.03.021
Livermore, 2007, Natural ventilation of a building with heating at multiple levels, Building and Environment, 42, 1417, 10.1016/j.buildenv.2005.12.014
Chenvidyakarn, 2007, Stratification and oscillations produced by pre-cooling during transient natural ventilation, Building and Environment, 42, 99, 10.1016/j.buildenv.2005.08.007
Yu, 2007, Scale model study of airflow performance in a ceiling slot-ventilated enclosure: non-isothermal condition, Building and Environment, 42, 1142, 10.1016/j.buildenv.2005.12.004
Morsing, 2008, Scale model experiments to determine the effects of internal airflow and floor design on gaseous emissions from animal houses, Biosystems Engineering, 99, 99, 10.1016/j.biosystemseng.2007.09.028
Tapsoba, 2007, Airflow patterns in a slot-ventilated enclosure partially loaded with empty slotted boxes, International Journal of Heat and Fluid Flow, 28, 963, 10.1016/j.ijheatfluidflow.2007.03.008
Lee, 2007, Evaluation of CFD accuracy for the ventilation study of a naturally ventilated broiler house, Japan Agricultural Research Quarterly, 41, 53, 10.6090/jarq.41.53
Kang, 2008, Improvement of natural ventilation in a large factory building using a louver ventilator, Building and Environment, 43, 2132, 10.1016/j.buildenv.2007.12.013
Zhang, 2009, Experimental and numerical investigation of airflow and contaminant transport in an airliner cabin mockup, Building and Environment, 44, 85, 10.1016/j.buildenv.2008.01.012
Melikov, 2007, Accuracy limitations for low-velocity measurements and draft assessment in rooms, HVAC&R Research, 13, 971, 10.1080/10789669.2007.10391465
Sun, 2007, An overview of room air motion measurement: technology and application, HVAC&R Research, 13, 929, 10.1080/10789669.2007.10391463
Sandberg, 2007, Whole-field measuring methods in ventilated rooms, HVAC&R Research, 13, 951, 10.1080/10789669.2007.10391464
Larsen, 2008, Single-sided natural ventilation driven by wind pressure and temperature difference, Energy and Buildings, 40, 1031, 10.1016/j.enbuild.2006.07.012
Nishizawa, 2007, Study of the airflow structure in cross-ventilated rooms based on a full-scale model experiment, International Journal of Ventilation, 6, 51, 10.1080/14733315.2007.11683764
Wang, 2008, Experimental study of ventilation effectiveness and air velocity distribution in an aircraft cabin mockup, Building and Environment, 43, 337, 10.1016/j.buildenv.2006.02.024
Stathopoulou, 2008, An experimental study of air quality inside large athletic halls, Building and Environment, 43, 834, 10.1016/j.buildenv.2007.01.026
Yoshino, 2007, Passive cooling effect of traditional Japanese building's features, Management of Environmental Quality, 18, 578, 10.1108/14777830710778337
Pajumägia, 2008, Spatial distribution of air temperature as a measure of ventilation efficiency in large uninsulated cowshed, Building and Environment, 43, 1016, 10.1016/j.buildenv.2007.02.015
Hummelgaard, 2007, Indoor air quality and occupant satisfaction in five mechanically and four naturally ventilated open-plan office buildings, Building and Environment, 42, 4051, 10.1016/j.buildenv.2006.07.042
Xu, 2007, Field experiments on natural energy utilization in a residential house with a double skin façade system, Building and Environment, 42, 2014, 10.1016/j.buildenv.2005.07.026
Axley, 2007, Multizone airflow modeling in buildings: history and theory, HVAC&R Research, 13, 907, 10.1080/10789669.2007.10391462
Wang, 2008, Evaluation of some assumptions used in multizone airflow network models, Building and Environment, 43, 1671, 10.1016/j.buildenv.2007.10.010
Wang, 2007, Theoretical and numerical studies of coupling multizone and CFD models for building air distribution simulations, Indoor Air, 17, 348, 10.1111/j.1600-0668.2007.00481.x
Wang, 2007, Validation of a coupled multizone and CFD program for building airflow and contaminant transport simulations, HVAC&R Research, 13, 267, 10.1080/10789669.2007.10390954
Hu, 2007, Modeling particle dispersion under human activity disturbance in a multizone indoor environment, Journal of Architectural Engineering, 13, 187, 10.1061/(ASCE)1076-0431(2007)13:4(187)
Firrantello, 2007, Use of factorial sensitivity analysis in multizone airflow model tuning, ASHRAE Transactions, 113, 642
Wang L, Chen Q. Applications of a coupled multizone and CFD model to calculate airflow and contaminant dispersion in built environment for emergency management. HVAC&R Research; submitted for publication.
Howard-Reed, 2008, Characterizing gaseous air cleaner performance in the field, Building and Environment, 43, 368, 10.1016/j.buildenv.2006.03.020
Khoukhi, 2007, The effect of the wind speed velocity on the stack pressure in medium-rise buildings in cold region of China, Building and Environment, 42, 1081, 10.1016/j.buildenv.2005.11.003
Maatouk, 2007, A simplified procedure to investigate airflow patterns inside tall buildings using COMIS, Architectural Science Review, 50, 365, 10.3763/asre.2007.5044
Sohn, 2007, Predicting size-resolved particle behavior in multizone buildings, Atmospheric Environment, 41, 1473, 10.1016/j.atmosenv.2006.10.010
Crawley, 2008, Contrasting the capabilities of building energy performance simulation programs, Building and Environment, 43, 661, 10.1016/j.buildenv.2006.10.027
Megri, 2007, Building load and energy simulation programs and the design process, International Journal of Ventilation, 6, 177, 10.1080/14733315.2007.11683776
Megri AC,Haghighat, 2007, Zonal modeling for simulating indoor environment of buildings: review, recent developments, and applications, HVAC&R Research, 13, 887, 10.1080/10789669.2007.10391461
Song, 2008, A new approach on zonal modeling of indoor environment with mechanical ventilation, Building and Environment, 43, 278, 10.1016/j.buildenv.2006.04.026
Yan, 2008, An integrated modeling tool for simultaneous analysis of thermal performance and indoor air quality in buildings, Building and Environment, 43, 287, 10.1016/j.buildenv.2006.05.014
Jiru, 2008, Modeling ventilated double skin façade - a zonal approach, Energy and Buildings, 10.1016/j.enbuild.2008.02.017
Lukasse, 2007, A physical model to predict climate dynamics in ventilated bulk-storage of agricultural produce, International Journal of Refrigeration, 30, 195, 10.1016/j.ijrefrig.2006.03.011
Norton, 2006, Computational fluid dynamics (CFD) – an effective and efficient design and analysis tool for the food industry: a review, Trends in Food Science and Technology, 17, 600, 10.1016/j.tifs.2006.05.004
Norton, 2007, Applications of computational fluid dynamics (CFD) in the modelling and design of ventilation systems in the agricultural industry: a review, Bioresource Technology, 98, 2386, 10.1016/j.biortech.2006.11.025
Launder, 1974, The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Energy, 3, 269, 10.1016/0045-7825(74)90029-2
Yakhot, 1986, Renormalization group analysis of turbulence, Journal of Scientific Computing, 1, 3, 10.1007/BF01061452
Smagorinsky, 1963, General circulation experiments with the primitive equations I: the basic experiment, Monthly Weather Review, 91, 99, 10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
Zhang, 2007, Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: part 2 – comparison with experimental data from literature, HVAC&R Research, 13, 871, 10.1080/10789669.2007.10391460
Zhai, 2007, Evaluation of various turbulence models in predicting airflow and turbulence in enclosed environments by CFD: part 1 – summary of prevalent turbulence models, HVAC&R Research, 13, 853, 10.1080/10789669.2007.10391459
Yuan, 2007, The effect of building shape modification on wind pressure differences for cross-ventilation of a low-rise building, International Journal of Ventilation, 6, 167, 10.1080/14733315.2007.11683775
Kuznik, 2007, Experimental and numerical study of a full scale ventilated enclosure: comparison of four two equations closure turbulence models, Building and Environment, 42, 1043, 10.1016/j.buildenv.2005.11.024
Tapsoba, 2007, Airflow patterns inside slotted obstacles in a ventilated enclosure, Computers and Fluids, 36, 935, 10.1016/j.compfluid.2006.04.002
Rohdin, 2007, Numerical predictions of indoor climate in large industrial premises. A comparison between different k–ε models supported by field measurements, Building and Environment, 42, 3872, 10.1016/j.buildenv.2006.11.005
Zhao, 2007, Analysis of airflow in a full-scale room with non-isothermal jet ventilation using PTV techniques, ASHRAE Transactions, 113, 414
Tian, 2007, Numerical studies of indoor airflow and particle dispersion by large eddy simulation, Building and Environment, 42, 3483, 10.1016/j.buildenv.2006.10.047
Chang, 2007, Numerical study of the effect of ventilation pattern on coarse, fine, and very fine particulate matter removal in partitioned indoor environment, Journal of the Air and Waste Management Association, 57, 179, 10.1080/10473289.2007.10465311
Lai, 2007, Large-eddy simulations on indoor/outdoor air quality relationship in an isolated urban building, Journal of Engineering Mechanics, 133, 887, 10.1061/(ASCE)0733-9399(2007)133:8(887)
Abdalla, 2007, Large-eddy simulation of buoyancy-driven natural ventilation in an enclosure with a point heat source, International Journal of Computational Fluid Dynamics, 21, 231, 10.1080/10618560701599710
Zitzmann, 2007, Dynamic CFD modelling of thermal mass and air movement, International Journal of Ventilation, 6, 145, 10.1080/14733315.2007.11683773
Ng, 2008, Applications of high-resolution schemes based on normalized variable formulation for 3D indoor airflow simulations, International Journal for Numerical Methods in Engineering, 73, 948, 10.1002/nme.2106
Shakeri, 2007, Impact of occupant modelling on the prediction of airflow around occupants in a ventilated room, International Journal of Ventilation, 6, 129, 10.1080/14733315.2007.11683772
Chen, 2007, Computer modeling of multiscale fluid flow and heat and mass transfer in engineered spaces, Chemical Engineering Science, 62, 3580, 10.1016/j.ces.2006.11.059
Wang, 2008, Coupled simulations for naturally ventilated residential buildings, Automation in Construction, 17, 386, 10.1016/j.autcon.2007.06.004
Wang, 2007, The impacts of ventilation strategies and facade on indoor thermal environment for naturally ventilated residential buildings in Singapore, Building and Environment, 42, 4006, 10.1016/j.buildenv.2006.06.027
Fortmeyer, 2007, Getting aggressive about passive design, ENR (Engineering News-Record), 258, 81
Pappas, 2008, Numerical investigation on thermal performance and correlations of double skin facade with buoyancy-driven airflow, Energy and Buildings, 40, 466, 10.1016/j.enbuild.2007.04.002
Kim, 2007, Two-step optimal design method using genetic algorithms and CFD-coupled simulation for indoor thermal environments, Applied Thermal Engineering, 27, 3, 10.1016/j.applthermaleng.2006.05.022
Gao, 2007, Investigating indoor air quality and thermal comfort using a numerical thermal manikin, Indoor and Built Environment, 16, 7, 10.1177/1420326X06074667
Zhang, 2008, Study on biological contaminant control strategies under different ventilation models in hospital operating room, Building and Environment, 43, 793, 10.1016/j.buildenv.2007.01.018
Zhao, 2008, Particle dispersion and deposition in ventilated rooms: Testing and evaluation of different Eulerian and Lagrangian models, Building and Environment, 43, 388, 10.1016/j.buildenv.2007.01.005
Zhao, 2007, Modeling particle dispersion in personalized ventilated room, Building and Environment, 42, 1099, 10.1016/j.buildenv.2005.11.009
Helmis, 2007, Indoor air quality in a dentistry clinic, Science of the Total Environment, 377, 349, 10.1016/j.scitotenv.2007.01.100
Sun, 2007, Dispersion and settling characteristics of evaporating droplets in ventilated room, Building and Environment, 42, 1011, 10.1016/j.buildenv.2005.10.034
Wan, 2007, Transport characteristics of expiratory droplets and droplet nuclei in indoor environments with different ventilation airflow patterns, Journal of Biomechanical Engineering, 129, 341, 10.1115/1.2720911
Zhang, 2007, Comparison of the Eulerian and Lagrangian methods for predicting particle transport in enclosed spaces, Atmospheric Environment, 41, 5236, 10.1016/j.atmosenv.2006.05.086
Lai, 2007, Comparison of a new Eulerian model with a modified Lagrangian approach for particle distribution and deposition indoors, Atmospheric Environment, 41, 5249, 10.1016/j.atmosenv.2006.05.088
Kassomenos, 2008, Modelling the dispersion of a toxic substance at a workplace, Environmental Modelling and Software, 23, 82, 10.1016/j.envsoft.2007.05.003
Li, 2007, Predicting worker exposure – the effect of ventilation velocity, free-stream turbulence and thermal condition, Journal of Occupational and Environmental Hygiene, 4, 864, 10.1080/15459620701665688
Kato, 2008, Study on inhaled air quality in a personal air-conditioning environment using new scales of ventilation efficiency, Building and Environment, 43, 494, 10.1016/j.buildenv.2006.08.019
Bady, 2008, Towards the application of indoor ventilation efficiency indices to evaluate the air quality of urban areas, Building and Environment, 43, 1991, 10.1016/j.buildenv.2007.11.013
Chen, 2007, Sustainable urban housing in China, Journal of Harbin Institute of Technology (New Series), 14, 6
Asfour, 2007, A comparison between CFD and Network models for predicting wind-driven ventilation in buildings, Building and Environment, 42, 4079, 10.1016/j.buildenv.2006.11.021
Ji, 2007, CFD modelling of natural displacement ventilation in an enclosure connected to an atrium, Building and Environment, 42, 1158, 10.1016/j.buildenv.2005.11.002
Mak, 2007, A numerical simulation of wing walls using computational fluid dynamics, Energy and Buildings, 39, 995, 10.1016/j.enbuild.2006.10.012
Li, 2007, The assessment of the performance of a windcatcher system using computational fluid dynamics, Building and Environment, 42, 1135, 10.1016/j.buildenv.2005.12.015
Cheng, 2007, A study of natural ventilation in a refuge floor, Building and Environment, 42, 3322, 10.1016/j.buildenv.2006.08.031
Gosselin, 2008, A computational method for calculating heat transfer and airflow through a dual-airflow window, Energy and Buildings, 40, 452, 10.1016/j.enbuild.2007.03.010
Gao, 2007, Calculation of natural ventilation in large enclosures, Indoor and Built Environment, 16, 292, 10.1177/1420326X06079964
Lau, 2007, Floor-supply displacement ventilation for workshops, Building and Environment, 42, 1718, 10.1016/j.buildenv.2006.01.016
Zhang, 2007, Novel air distribution systems for commercial aircraft cabins, Building and Environment, 42, 1675, 10.1016/j.buildenv.2006.02.014
Ng, 2008, Response surface models for CFD predictions of air diffusion performance index in a displacement ventilated office, Energy and Buildings, 40, 774, 10.1016/j.enbuild.2007.04.024
Karimipanah, 2007, Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms, Building and Environment, 42, 647, 10.1016/j.buildenv.2005.10.016
Yuan, 2007, CFD simulation and optimization of the ventilation for subway side-platform, Tunnelling and Underground Space Technology, 22, 474, 10.1016/j.tust.2006.10.004
Bin, 2007, Three-dimensional numerical simulation of a hybrid fresh air and recirculated air diffuser for decoupled ventilation strategy, Building and Environment, 42, 1975, 10.1016/j.buildenv.2006.04.018
Khan, 2007, Effects of nozzle geometry on air flow jet and temperature distribution in an enclosed space, International Journal of Ventilation, 5, 405, 10.1080/14733315.2007.11683755
Zerihun Desta, 2008, Behaviour of well-mixed zones (WMZs) in an imperfectly mixed ventilated room, Building and Environment, 43, 2035, 10.1016/j.buildenv.2007.12.002
Zhang, 2007, Optimal sensor placement for airborne contaminant detection in an aircraft cabin, HVAC&R Research, 13, 683, 10.1080/10789669.2007.10390980
Mazumdar, 2008, Influence of cabin conditions on placement and response of contaminant detection sensors in a commercial aircraft, Journal of Environmental Monitoring, 10, 71, 10.1039/B713187A
Lomas, 2007, Architectural design of an advanced naturally ventilated building form, Energy and Buildings, 39, 166, 10.1016/j.enbuild.2006.05.004
Marsik, 2007, Use of a state space model to study the effect of outdoor air quality on indoor air in Fairbanks Alaska, Indoor and Built Environment, 16, 538, 10.1177/1420326X07084288
Pietrzyk, 2008, Probabilistic analysis of air infiltration in low-rise buildings, Building and Environment, 43, 537, 10.1016/j.buildenv.2007.01.024
Zhang, 2007, Identification of contaminant sources in enclosed environments by inverse CFD modelling, Indoor Air, 17, 167, 10.1111/j.1600-0668.2006.00452.x
Zhang, 2007, Identification of contaminant sources in enclosed spaces by a single sensor, Indoor Air, 17, 439