Ventilation and energy performance of partitioned indoor spaces under mixing and displacement ventilation

Argyropoulos CD, Markatos NC (2015). Recent advances on the numerical modelling of turbulent flows. Applied Mathematical Modelling, 39: 693–732.

ASHRAE (2007). ANSI/ASHRAE Standard 62-2007: Ventilation for Acceptable Indoor Air Quality. Atlanta, GA, USA: American Society of Heating, Refrigeration, and Air-conditioning Engineers.

ASHRAE (2009). ASHRAE Handbook—Fundamentals. Atlanta, GA, USA: American Society of Heating, Refrigeration, and Airconditioning Engineers.

ASHRAE (2013). ANSI/ASHRAE 55-2013: Thermal Environmental Conditions for Human Occupancy. Atlanta, GA, USA: American Society of Heating, Refrigeration, and Air-conditioning Engineers.

Awbi HB (1998). Energy efficient room air distribution. Renewable Energy, 15: 293–299.

Awbi HB (2003). Ventilation of Buildings. London: Taylor & Francis.

Celik IB, Ghia U, Roache PJ (2008). Procedure for estimation and reporting of uncertainty due to discretization in CFD applications. Journal of Fluids Engineering, 130: 078001.

Chen H, Janbakhsh S, Larsson U, Moshfegh B (2015). Numerical investigation of ventilation performance of different air supply devices in an office environment. Building and Environment, 90: 37–50.

Fanger PO, Melikov AK, Hanzawa H, Ring J (1988). Air turbulence and sensation of draught. Energy and Buildings, 12: 21–39.

Fisk WJ, Faulkner D, Sullivan D, Bauman F (1997). Air change effectiveness and pollutant removal efficiency during adverse mixing conditions. Indoor Air, 7: 55–63.

Gan G (1995). Evaluation of room air distribution systems using computational fluid dynamics. Energy and Buildings, 23: 83–93.

Gilani S, Montazeri H, Blocken B (2013). CFD simulation of sensitivity analysis. In: Proceedings of the 13th International IBPSA Building Simulation Conference, Chambery, France.

Hamilton SD, Roth KW, Brodrick J (2004). Displacement ventilation. ASHRAE Journal, 46(9): 56–58.

Heiselberg P (1996). Room air and contaminant distribution in mixing ventilation. ASHRAE Transactions, 102(2): 332–339.

Hu S, Chen Q, Glicksman LR (1999). Comparison of energy consumption between displacement and mixing ventilation systems for different US buildings and climates. ASHRAE Transactions, 105(2): 453–464.

Jiang J (2007). Experimental and numerical study of air flows in a full scale room. PhD Thesis, University of Illinois at Urbana-Champaign, USA.

Khan JA, Feigley CE, Lee E, Ahmed MR, Tamanna S (2006). Effects of inlet and exhaust locations and emitted gas density on indoor air contaminant concentrations. Building and Environment, 41: 851–863.

Kuo J-Y, Chung K-C (1999). The effect of diffuser’s location on thermal comfort analysis with different air distribution strategies. Journal of Building Physics, 22: 208–229.

Lau J, Chen Q (2007). Floor-supply displacement ventilation for workshops. Building and Environment, 42: 1718–1730.

Lee H, Awbi HB (2004). Effect of internal partitioning on indoor air quality of rooms with mixing ventilation—Basic study. Building and Environment, 39: 127–141.

Lim T, Cho J, Kim BS (2010). The influence of ward ventilation on hospital cross infection by varying the location of supply and exhaust air diffuser using CFD. Journal of Asian Architecture and Building Engineering, 9: 259–266.

Lin Z, Chow TT, Fong KF, Tsang CF, Wang Q (2005a). Comparison of performances of displacement and mixing ventilations. Part II: Indoor air quality. International Journal of Refrigeration, 28: 288–305.

Lin Z, Chow TT, Tsang CF, Fong KF, Chan LS (2005b). CFD study on effect of the air supply location on the performance of the displacement ventilation system. Building and Environment, 40: 1051–1067.

Lin Z, Chow TT, Tsang CF, Fong KF, Chan LS, Shum WS, Tsai L (2009). Effect of internal partitions on the performance of under floor air supply ventilation in a typical office environment. Building and Environment, 44: 534–545.

Little AD (1999). Opportunities for energy savings in the residential and commercial sectors with high-efficiency electric motors. Report for US Department of Energy.

Liu S, Novoselac A (2014). Lagrangian particle modeling in the indoor environment: A comparison of RANS and LES turbulence methods (RP-1512). HVAC&R Research, 20: 480–495.

Lo LJ, Novoselac A (2010). Localized air-conditioning with occupancy control in an open office. Energy and Buildings, 42: 1120–1128.

Manning A, Memarzadeh F, Riskowski GL (2000). Analysis of air supply type and exhaust location in laboratory animal research facilities using CFD. ASHRAE Transactions, 106(1): 877–883.

Menter FR (1994). Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32: 1598–1605.

Nielsen PV (1993). Displacement ventilation. PhD Thesis, Aalborg University, Denmark.

Nielsen PV, Heby T, Moeller-Jensen B (2006). Air distribution in a room with ceiling-mounted diffusers—Comparison with wallmounted diffuser, vertical ventilation, and displacement ventilation. ASHRAE Transactions, 112(2): 498–504.

Novoselac A, Srebric J (2002). A critical review on the performance and design of combined cooled ceiling and displacement ventilation systems. Energy and Buildings, 34: 497–509.

Posner JD, Buchanan CR, Dunn-Rankin D (2003). Measurement and prediction of indoor air flow in a model room. Energy and Buildings, 35: 515–526.

Rim D, Novoselec A, Morrison G (2009). The Influence of chemical interactions at the human surface on breathing zone levels of reactants and products. Indoor Air, 19: 324–334.

Rim D, Novoselac A (2008). Transient simulation of airflow and pollutant dispersion under mixing flow and buoyancy driven flow regimes in residential buildings. ASHRAE Transactions, 114(2): 130–142.

Rim D, Novoselac A (2010a). Occupational exposure to hazardous airborne pollutants: Effects of air mixing and source location. Journal of Occupational and Environmental Hygiene, 7: 683–692.

Rim D, Novoselac A (2010b). Ventilation effectiveness as an indicator of occupant exposure to particles from indoor sources. Building and Environment, 45: 1214–1224.

Rim D, Schiavon S, Nazaroff WW (2015). Energy and cost associated with ventilating office buildings in a tropical climate. PLoS ONE, 10(3): e0122310.

Roache PJ (1994). Perspective: A method for uniform reporting of grid refinement studies. Journal of Fluids Engineering, 116: 405–413.

Roth KW, Westphalen D, Dieckmann J, Hamilton SD, Goetzler W (2002). Energy consumption characteristics of commercial building HVAC systems, vol. III: Energy savings potential. Report for US Department of Energy Building Technologies Program.

Sandberg M (1981). What is ventilation efficiency? Building and Environment, 16: 123–135.

Schiavon S, Rim D, Pasut W, Nazaroff WW (2016). Sensation of draft at uncovered ankles for women exposed to displacement ventilation and underfloor air distribution systems. Building and Environment, 96: 228–236.

Serra N, Semiao V (2009). Comparing displacement ventilation and mixing ventilation as HVAC strategies through CFD. Engineering Computations, 26: 950–971.

Shan X, Zhou J, Chang VWC, Yang EH (2016). Comparing mixing and displacement ventilation in tutorial rooms: Students’ thermal comfort, sick building syndromes, and short-term performance. Building and Environment, 102: 128–137.

Sørensen DN, Nielsen PV (2003). Quality control of computational fluid dynamics in indoor environments. Indoor Air, 13: 2–17.

Sørensen DN, Voigt LK (2003). Modelling flow and heat transfer around a seated human body by computational fluid dynamics. Building and Environment, 38: 753–762.

Walikewitz N, Jänicke B, Langner M, Meier F, Endlicher W (2015). The difference between the mean radiant temperature and the air temperature within indoor environments: A case study during summer conditions. Building and Environment, 84: 151–161.

Wilcox DC (2006). Turbulence Modeling for CFD, 3rd edn. La Cãnada, CA, USA: D C W Industries.

Wu YL, Hsu SP, Sung WP, Hsieh WD (2010). Effect of diffuser design on thermal comfort and ventilation efficiency. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 14: 229–233.