Variable compression ratio engine: A future power plant for automobiles - an overview
Tóm tắt
Increasingly stringent emissions and fuel economy standards have long remained a source of challenges for research in automobile engine technology development towards the more thermally efficient and less polluting engine. Spark ignition (SI) engines have lower part-load efficiency when compared with the diesel engines. The greatest opportunity for improving SI engine efficiency is by way of higher compression ratio, variable valve timing, low friction, reducing throttling losses, boosting, and down-sizing. Variable compression ratio (VCR) technology has long been recognized as a method for improving the fuel economy of SI engines. In order to vary the compression ratio, some method of varying the geometric compression ratio through changing the clearance volume is required. There are several ways of doing this; various patents have been filed and designs presented, including modification of the compression ratio by moving the cylinder head, variation of combustion chamber volume using a secondary piston or valve, variation of piston deck height, modification of connecting rod geometry, moving the crankpin within the crankshaft, and moving the crankshaft axis. The potential of these technologies needs to be evaluated by a trade-off between cost and consumption benefit. This paper reviews the geometric approaches and solutions used to achieve VCR, considers the results of prior research, and forecasts what benefits, if any, a VCR would bring to present engine design.
Từ khóa
Tài liệu tham khảo
Taylor C. F., 1960, The internal-combustion engine in theory and practice
Heywood J. B., 1995, Internal combustion engine fundamentals
Schwaderlapp M., Habermann K., Yapici K. Variable compression ratio - a design solution for fuel economy concepts. SAE paper 2002–01-1103, 2002.
Moteki K., Aoyama S., Ushijima K., Hiyoshi R., Takemura S., Fujimoto H., Arai T. A study of a variable compression ratio system with a multi-link mechanism. SAE paper 2003–01-0921, 2003.
Haraldsson G., Tunestal P., Johansson B., Hyvonen J. HCCI combustion phasing in a multi cylinder engine using variable compression ratio. SAE paper 2002–01-2858, 2002.
Clarke J. R., Tabaczynski R. J. Internal combustion engine with adjustable compression ratio and knock control. US Pat. 6135086 (24 October 2000).
Sykes R. G., Tickford Methods to reduce the fuel consumption of gasoline engines. In Proceedings of Conference Engines Expo 2000.
Assanis D. C., Wooheum C., Choi I., Ickes A., Jung D., Martz J., Nelson R., Sanko J., Thompson S., Brevick J., Inwood B. Pressure reactive piston technology investigation and development for spark ignition engines. SAE paper 2005–01-1648, 2005.
de GooijerB.GomecsysB. V.Technical document, February 2002, available fromwww.gomecsys.com
Mallikarjuna J., Ganesan V. Theoretical and experimental investigations of extended expansion concept for SI engines. SAE paper 2002–01-1740, 2002.
Mistry Chetankumar Sureshbhai C. K. To study the effect of variable compression ratio on performance of LPG based single cylinder engine. In Proceedings of World Automotive Congress FISITA 2006, Yokohama, Japan, 2006, paper F2006P180.
Khatri D. S., 2006, SAE India, 7