Validation of combined analytical methods to predict slip in cylindrical roller bearings

Keller, 2016 Wiser, 2019, Assessing wind power operating costs in the United States: results from a survey of wind industry experts, Renew Energy Focus, 30, 46, 10.1016/j.ref.2019.05.003 Greco, 2013, Material wear and fatigue in wind turbine systems, Wear, 302, 1583, 10.1016/j.wear.2013.01.060 Evans, 2016, An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings, Mater Sci Technol, 32, 1133, 10.1080/02670836.2015.1133022 Gould, 2017, An analysis of premature cracking associated with microstructural alterations in an AISI 52100 failed wind turbine bearing using X-ray tomography, Mater Des, 117, 417, 10.1016/j.matdes.2016.12.089 Gould, 2015, The influence of sliding and contact severity on the generation of white etching cracks, Tribol Lett, 60, 1, 10.1007/s11249-015-0602-6 Gould, 2016, Investigating the process of white etching crack initiation in bearing steel, Tribol Lett, 62, 10.1007/s11249-016-0673-z Stadler, 2016, White etching cracks — a symptom of bearing failures, 245 Stadler, 2018, White etching cracks — a consequence, not a root cause of bearing failure, Evolution, 1 Manieri, 2019, The origins of white etching cracks and their significance to rolling bearing failures, Int J Fatigue, 120, 107, 10.1016/j.ijfatigue.2018.10.023 Harris, 1966, An analytical method to predict skidding in high speed roller bearings, ASLE Trans, 9, 229, 10.1080/05698196608972139 Dowson, 1960, The effect of material properties on the lubrication of elastic rollers, J Mech Eng Sci, 2, 188, 10.1243/JMES_JOUR_1960_002_028_02 Poplawski, 1972, Slip and cage forces in a high-speed roller bearing, J Lubr Technol, 94, 143, 10.1115/1.3451660 Harris, 1973, Rolling element bearing dynamics, Wear, 23, 311, 10.1016/0043-1648(73)90020-3 Kleckner, 1980, High speed cylindrical rolling element bearing analysis “CYBEAN” - analytical formulation, J Lubr Technol, 102, 380, 10.1115/1.3251553 Gupta, 1979, Dynamics of rolling-element bearings part I: cylindrical roller bearing analysis, J Lubr Technol, 101, 293, 10.1115/1.3453357 Gupta, 1979, Dynamics of rolling-element bearings part II: Cylindrical roller bearing results, J Lubr Technol, 101, 305, 10.1115/1.3453360 Houpert, 2010, CAGEDYN: a contribution to rolling bearing dynamic calculations part I: basic tribology concepts, Tribol Trans, 53, 1, 10.1080/10402000903132093 Houpert, 2010, CAGEDYN: a contribution to rolling bearing dynamic calculations part II: Description of the numerical tool and its outputs, Tribol Trans, 53, 10, 10.1080/10402000903132101 Houpert, 2010, CAGEDYN: a contribution to rolling bearing dynamic calculations part III: Experimental validation, Tribol Trans, 53, 848, 10.1080/10402004.2010.496069 Stacke, 1999, BEAST - A rolling bearing simulation tool, Proc Inst Mech Eng K, 213, 63 Ioannides E, Stacke L-E, Fritzson D, Nakhimovski I. Multibody rolling bearing calculations: computer program BEAST. In: World tribology congress III, 1(WTC2005-64337). 2005, p. 903–4. Shaeffler, 2019 Rhodes, 2019 Tassone, 1975, Roller bearing slip and skidding damage, J Aircr, 12, 281, 10.2514/3.44445 Fingerle, 2016, An experimental approach on slip behaviour of tapered roller bearings, 29 Bercea, 1998, Simulating roller - cage pocket friction in a tapered roller bearing, Eur J Mech Environ Eng, 43, 189 Petrov, 1883 Harris, 2007, 392 Keller, 2017 Keller, 2018 Keller, 2018 Volkmuth, 2009, Slippage measurements in roller bearings, 161 Keller, 2019 Guo, 2017, Investigation of high-speed shaft bearing loads in wind turbine gearboxes through dynamometer testing, Wind Energy, 21, 139, 10.1002/we.2150 Martin, 1916, The lubrication of gear teeth, Engineering, 102, 109 Vaes, 2019 Duda, 2018, Investigation of dynamic drivetrain behaviour of a wind turbine during a power converter fault, J Phys Conf Ser, 1037, 1 Santos, 2015 Vaes, 2017, How does the application of actual standards & guidelines contribute to robust bearing solution in multi-MW wind turbine gearboxes?, 43