Using Plaxis 2D finite element modeling to assess bearing capacity of Sultana’s soil in Najran Region, Kingdom of Saudi Arabia

Terzaghi, 1943 Meyerhof, 1957, The ultimate bearing capacity of foundation on slopes, 384 Hansen, 1970, A revised and extended formula for bearing capacity, Bull. Danish Geotechnical Inst., 28, 5 A.S. Vesić, 1973. Analysis of Ultimate Loads of Shallow Foundations, in Journal of the Soil Mechanics and Foundations Division ASCE vol. 99, ed, 1973, pp. 45-73. A.S. Vesic, 1975. Bearing capacity of shallow foundations, Foundation Engineering Handbook., pp. 121-147, 1975. B.M. Das, 2011. Principles of foundation engineering. SI. 7th Ed, p. 133. Shahin, 2002, Predicting settlement of shallow foundations using Neural Networks, J. Geotech. Geoenviron. Eng., ASCE, 128, 785, 10.1061/(ASCE)1090-0241(2002)128:9(785) H.G. Poulos, 1999. Common procedures for foundation settlement analysis-Are they adequate? Proceedings, 8th Australia New Zealand Conf. on Geomechanics, Hobart, pp. 3-25. A.M. Alnuaim, M.H. EL Naggar, 2014. Performance of Foundations in Sabkha Soil: Numerical Investigation. Geotech Geol Eng (2014) 32:637–656. A.B. Salahudeen, T.S. Ijimdiya, A.O. Eberemu, K.J. Osinubi, 2019. Assessment of foundation settlement prediction using analytical and numerical techniques, Nigerian Res. J. Eng. Environ. Sci. 4(1) 2019 pp. 152-165. Yu, 2010, Three-dimensional large deformation FE analysis of square footings in two-layered clays, J. Geotech. Geoenviron. Eng. ASCE, 137, 52, 10.1061/(ASCE)GT.1943-5606.0000400 Salahudeen, 2016, Evaluation of bearing capacity and settlement of foundations, Leonardo Electron. J. Practices Technol. (LEJPT), 29, 93 Ornek, 2012, Numerical analysis of circular footings on natural clay stabilized with a granular fill, Actageotechnicaslovenica, 1, 61 Laman, 2007, Numerical studies of ring foundations on geogrid-reinforced sand, Geosynthetics Int., 14, 1, 10.1680/gein.2007.14.2.52 P. Subramaniam, 2011, Reliability based analysis of slope, foundation and retaining wall using finite element method, Published Master of Technology Thesis, Department of Civil Engineering, National Institute of Technology, Rourkela – India. A.B. Salahudeen, 2017. Prediction of foundation settlement based on standard penetration test results using empirical and numerical techniques. Unpublished PhD thesis, Department of Civil Engineering, Ahmadu Bello University, Zaria, Nigeria. pp. 70 – 77. Abdullah, 2019, 3D finite element modeling to predict the foamed sulfur asphalt marl soil mixes rutting behavior, Ain Shams Eng. J., 10, 661, 10.1016/j.asej.2019.03.005 Zhu, 2010, Bearing capacity of rectangular footing on two layer clay, American Society of Civil Engineers, 191, 997 BS 1377-3-1990. Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests. British Standards Institution. ASTM D 422 - 63(2007) Standard Test Method for Particle-Size Analysis of Soils. Annual Book of ASTM Standards. ASTM D 4318 – 10 (2010) Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. Annual Book of ASTM Standards. ASTM D 1557-07 (2002) Standard test method for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). Annual Book of ASTM Standards. ASTM D 3080 – 98 (1998) Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions. Annual Book of ASTM Standards. A.M. Shahin, B.M. Jaksa, R. Holger, R.H. Maier, (2002). Artificial neural network−based settlement prediction formula for shallow foundations on granular soils. Australian Geomech., 37(4), pp. 45-52. Meyerhof, 1963, Some recent research on the bearing capacity of foundations, Can. Geotech. J., 1, 16, 10.1139/t63-003 AASHTO (2014). AASHTO LRFD Bridge Design Specifications, 7th Edition, with 2015 and 2016 Interim Revisions, LRFDUS-7-M. American Association of State Highway and Transportation Officials, Washington, DC. www.transportation.org.